Laboratory of Circuits,Sensors and Renewable Energy Sources, Electrical & Computer Engineering Department, Kounoupidiana Campus, Technical University of Crete, GR73100 Chania, Crete, Greece
Prof. Dr. George S. Stavrakakis
Laboratory of Circuits,Sensors and Renewable Energy Sources, Electrical & Computer Engineering Department, Kounoupidiana Campus, Technical University of Crete, GR73100 Chania, Crete, Greece
Electric power grids are a crucial infrastructure for the proper operation of any country and must be preserved from various threats. Detection of illegal electricity power consumption is a crucial issue for distribution system operators (DSOs). Minimizing non-technical losses is a challenging task for the smooth operation of electrical power system in order to increase electricity provider’s and nation’s revenue and to enhance the reliability of electrical power grid. The widespread popularity of smart meters enables a large volume of electricity consumption data to be collected and new artificial intelligence technologies could be applied to take advantage of these data to solve the problem of power theft more efficiently. In this study, a robust artificial intelligence algorithm adaptive neuro fuzzy inference system (ANFIS)—with many applications in many various areas—is presented in brief and applied to achieve more effective detection of electric power theft. To the best of our knowledge, there are no studies yet that involve the application of ANFIS for the detection of power theft. The proposed technique is shown that if applied properly it could achieve very high success rates in various cases of fraudulent activities originating from unauthorized energy usage.
This paper presents basic principles of built-environment physics’ modelling, and it reviews common computational tools and capabilities in a scope of practical design approaches for retrofitting purposes. Well-established simulation models and methods, with applications found mainly in the international scientific literature, are described by means of strengths and weaknesses as regards related tools’ availability, easiness to use, and reliability towards the determination of the optimal blends of retrofit measures for building energy upgrading and Urban Heat Island (UHI) mitigation. The various characteristics of computational approaches are listed and collated by means of comparison among the principal modelling methods as well as among the respective computational tools that may be used for simulation and decision-making purposes. Insights of coupling between building energy and urban microclimate models are also presented. The main goal was to provide a comprehensive overview of available simulation methods that can be used at the early design stages for planning retrofitting strategies and guiding engineers and technical professionals through the simulation tools’ options oriented to the considered case study.
In recent years, demand for electric energy has steadily increased; therefore, the integration of renewable energy sources (RES) at a large scale into power systems is a major concern. Wind and solar energy are among the most widely used alternative sources of energy. However, there is intense variability both in solar irradiation and even more in windspeed, which causes solar and wind power generation to fluctuate highly. As a result, the penetration of RES technologies into electricity networks is a difficult task. Therefore, more accurate solar irradiation and windspeed one-day-ahead forecasting is crucial for safe and reliable operation of electrical systems, the management of RES power plants, and the supply of high-quality electric power at the lowest possible cost. Clouds’ influence on solar irradiation forecasting, data categorization per month for successive years due to the similarity of patterns of solar irradiation per month during the year, and relative seasonal similarity of windspeed patterns have not been taken into consideration in previous work. In this study, three deep learning techniques, i.e., multi-head CNN, multi-channel CNN, and encoder–decoder LSTM, were adopted for medium-term windspeed and solar irradiance forecasting based on a real-time measurement dataset and were compared with two well-known conventional methods, i.e., RegARMA and NARX. Utilization of a walk-forward validation forecast strategy was combined, firstly with a recursive multistep forecast strategy and secondly with a multiple-output forecast strategy, using a specific cloud index introduced for the first time. Moreover, the similarity of patterns of solar irradiation per month during the year and the relative seasonal similarity of windspeed patterns in a timeseries measurements dataset for several successive years demonstrates that they contribute to very high one-day-ahead windspeed and solar irradiation forecasting performance.
The rapid development of technology used in electric vehicles, and in particular their penetration in electricity networks, is a major challenge for the area of electric power systems. The utilization of battery capacity of the interconnected vehicles can bring significant benefits to the network via the Vehicle to Grid (V2G) operation. The V2G operation is a process that can provide primary frequency regulation services in the electric network by exploiting the total capacity of a fleet of electric vehicles. In this paper, the impact of the plug-in hybrid electric vehicles (PHEVs) in the primary frequency regulation is studied and the effects PHEVs cause in non-interconnected isolated power systems with significant renewable energy sources (RES) penetration. Also it is taken into consideration the requirements of users for charging their vehicles. The V2G operation can be performed either with fluctuations in charging power of vehicles, or by charging or discharging the battery. So an electric vehicle user can participate in V2G operation either during the loading of the vehicle to the charging station, or by connecting the vehicle in the charging station without any further demands to charge its battery. In this paper, the response of PHEVs with respect to the frequency fluctuations of the network is modeled and simulated. Additionally, by using the PowerWorld Simulator software, simulations of the isolated power system of Cyprus Island, including the current RES penetration are performed in order to demonstrate the effectiveness of V2G operation in its primary frequency regulation.
The aim of the present paper is to investigate the use of the site “Potamon” Dam in the Prefecture of Rethymnon, Crete island, Greece, as a “virtual” renewable electricity supply of a pumped storage plant (PSP) in order to save and exploit the maximum possible part of the rejected wind energy of the autonomous power system of the Crete island. Taking into account the annual time series of the rejected power of the Crete power grid, the present research work targets the optimal configuration of the proposed PSP power station, including the sizing of its individual components as well as the determination of the capacity it could guarantee in order to be economically viable. The rejected electric energy from the actually operating wind farm production, which is not possible to be absorbed by the grid of Crete due to its stable operation limitations, could be absorbed by the here proposed pump storage plant (PSP) and converted to hydraulic energy. This can be achieved by pumping the water from the lower reservoir, which is the existing reservoir of the site “Potamon” Dam, with a storage capacity of about 22.5 million m3, up to the upper reservoir, which must be constructed accordingly. For the proposed PSP’s optimal size determination, established financial indices are used as an evaluation criterion for an investment life cycle of 25 years. The proposed PSP optimization is based on the dynamic mathematical model of the simulation results of the PSP’s hourly operation when incorporated in the Crete power grid for a whole year, performed in the Matlab 2016b computational environment (The MathWorks, Inc., Natick, MA, USA). The results of this research demonstrate the PSP’s technical feasibility and determine the PSP’s optimal CAPEX and the PSP’s whole life-time financial indicators in order that the whole investment be viable. Furthermore, the appropriate selling prices of the electricity produced from the proposed PSP were determined to achieve the PSP’s financial viability. The results comprise the key elements to prove the necessity for the establishment a.s.a.p. of the appropriate legal framework in order to have authorization to exploit the rejected RES (renewable energy sources) electric energy or the major part of it through PSPs, in priority in both the non-interconnected, as well as the interconnected power systems.
This paper presents a practical methodology to facilitate decision-making for the development of a renewable energy community (REC) in the municipality of Hersonissos in Crete, Greece. The impact of energy sharing produced from renewables through direct or indirect citizen participation presents an enormous opportunity to strengthen energy democracy and to alleviate energy poverty. Triggered by the latter being amongst the most essential goals for implementing policies towards low-carbon economies at the local level, the current study presents a step-by-step methodology to facilitate decision-making for building a municipality-led REC. Initially, potential sites and alternative sittings of photovoltaic (PV) plants are explored for detecting the optimal installation with respect to technical and possible legislative restrictions. The best REC business model is then selected based on a SWOT analysis, complemented with a detailed techno-economic analysis of the foreseen investments. According to the design calculations, the optimal PV plants/business-model option that emerged may achieve impressive environmental and economic benefits, i.e., reducing the municipality’s annual electricity-induced CO2 emissions and electricity expenses by at least 68.40% and 594,461.54 €, respectively.