Biologists and veterinarians rely on dart projectors to inject animals with drugs, take biopsies from specimens, or inject tracking chips. Firearms, air guns, and other launchers are limited in their ability to precisely control the kinetic energy of a projectile, which can injure the animal if too high. In order to improve the safety of remote drug delivery, a lidar-modulated electromagnetic launcher and a soft drug delivery dart were prototyped. A single-stage revolver coilgun and soft dart were designed and tested at distances up to 8 m. With a coil efficiency of 2.25%, the launcher could consistently deliver a projectile at a controlled kinetic energy of 1.00 ± 0.006 J and an uncontrolled kinetic energy of 2.66 ± 0.076 J. Although modifications to charging time, sensors, and electronics could improve performance, our launcher performed at the required level at the necessary distances. The precision achieved with commercial components enables many other applications, from law enforcement to manufacturing.
Conventional firefighting tools and methods can strain water sources, require toxic foams, or rely on pre-installed countermeasures. A low-cost, non-toxic, and portable option was previously overlooked in portable devices: electrically assisted “ionic wind” fire suppression. Conductive aerosols, carried by vortex rings, can potentially extend the length of an electric arc and suppress fires. After the simulation, two prototype vortex ring launchers were compared, one using compressed air and another using an elastic diaphragm. The efficiency of each test case was assessed with a purpose-built automated image analysis system. The compressed air vortex launcher had a significantly higher efficiency than the elastic diaphragm prototype, with a p-value of 0.0006. Regardless of the prototype or the use of conductive aerosols, the device had an effective range of up to 1.98 m. The highest reliability of 90 ± 4.1% was achieved at 1.52 m from the launcher. The observations with compressed air launcher results saw no significant difference regarding the use of the conductive aerosol. Further investigation of the concept requires a systematic examination of other types of fires, electronic optimization, permutations of chemicals and concentrations, other types of vortex generation, and human factors. The computer vision system could also be used to further detect and target active fires. Beyond firefighting, the device can be adapted to applications ranging from manufacturing to aerospace. Regardless of the use of conductive aerosols, handheld vortex ring generators are a versatile, potential firefighting tool.
Approximately two billion people worldwide lack access to clean drinking water, negatively impacting national security, hygiene, and agriculture. Atmospheric water harvesting (AWH) is the conversion of ambient humidity into clean water; however, conventional dehumidification is energy-intensive. Improvement in AWH may be achieved with elastocaloric cooling, using temperature-sensitive materials in active thermoregulation. Potential benefits, compared to conventional desiccant wheel designs, include substantial reductions in energy use, size, and complexity. A nickel–titanium (NiTi) elastocaloric water harvester was designed and compared with a desiccant wheel design under controlled conditions of relative humidity, air volume, and power. In a 30 min interval, the NiTi device harvested more water on average at 0.18 ± 0.027 mL/WH, compared to the 0.1567 ± 0.023 mL/WH of the desiccant wheel harvester. Moreover, the NiTi harvester required half the power input and was thermoregulated more efficiently. Future work will focus on mechanical design parameter optimization. Elastocaloric cooling is a promising advancement in dehumidification, making AWH more economical and feasible.
We report on the first open-source FDM 3D printer capable of fabricating its complete electromechanical ecosystem—motors, solenoids, memory systems, and control elements—representing a fundamental advance toward true mechanical self-replication. While previous self-replicating printers produced only structural components, our platform manufactures functional electronics comparable to commercial counterparts: solenoid actuators matching conventional benchmarks (108 ± 5 μJ vs. 99 ± 1.5 μJ), a three-pole brushed DC motor with performance paralleling commercial units, and dual memory architectures: functional mechanical (1639 bits/g) and developmental magnetic systems with theoretical density (5468 bits/g) encoding. The critical innovation lies not in individual components but in their integration within a single fabrication ecosystem, where printed memory directly controls printed actuators without external electronics. Using only standard FDM hardware and accessible materials, we demonstrate that low-cost printers can produce the control, storage, and motion subsystems necessary for autonomous operation. This work establishes that self-sustaining manufacturing—where machines reproduce their own functional components—is achievable with existing additive manufacturing technology, with profound implications for distributed production, space exploration, and resilient supply chains.
7 May 2026 in International Journal of Protective Structures
Active protection systems have long been employed on military vehicles and installations but have traditionally been too bulky for individual use. To enhance personal safety across military and industrial applications, the Active Neutralization of Celeritous Impacts by Lateral Expulsion (ANCILE) system was developed using open-source, commercially available components. The ANCILE system is a proof-of-concept for a semi-modular interception platform that can find and deflect incoming projectiles and debris. This gives the wearer an extra layer of protection, augmenting traditional passive protection. The system employs dual cameras mounted on a wearable, turret-like mechanism that can pneumatically deploy a Kevlar sail to intercept incoming threats. The experimental testing demonstrated reliable detection and interception of objects traveling up to 7.5 m/s, with an average interception probability of 28.6% (±8.3%) at higher velocities. Component-level stress testing was employed on the Kevlar sail, indicating it could physically resist standard ballistic projectiles ranging from .22 Long Rifle to .357 Magnum. While the hardware still limits the current detection and response performance, further refinement with specialized sensors and actuators could potentially enable higher-speed operation. While tested against slow-moving projectiles, this preliminary work validates the viability of a low-cost, wearable active protection system, which could find potential applications in construction, manufacturing, aerospace, and defense.