The demand for self-powered, flexible, and wearable electronic devices has been increasing in recent years for physiological and biomedical applications in real-time detection due to their higher flexibility and stretchability. This work fabricated a highly sensitive, self-powered wearable microdevice with Poly-Vinylidene Fluoride-Tetra Fluoroethylene (PVDF-TrFE) nano-fibers using an electrospinning technique. The dielectric response of the polymer was improved by incorporating the reduced-graphene-oxide (rGO) multi-walled carbon nano-tubes (MWCNTs) through doping. The dielectric behavior and piezoelectric effect were improved through the stretching and orientation of polymeric chains. The outermost layer was attained by chemical vapor deposition (CVD) of conductive polymer poly (3,4-ethylenedioxythiophene) to enhance the electrical conductivity and sensitivity. The hetero-structured nano-composite comprises PVDF-TrFE doped with rGO-MWCNTs over poly (3,4-ethylenedioxythiophene) (PEDOT), forming continuous self-assembly. The piezoelectric pressure sensor is capable of detecting human physiological vital signs. The pressure sensor exhibits a high-pressure sensitivity of 19.09 kPa⁻¹, over a sensing range of 1.0 Pa to 25 kPa, and excellent cycling stability of 10,000 cycles. The study reveals that the piezoelectric pressure sensor has superior sensing performance and is capable of monitoring human vital signs, including heartbeat and wrist pulse, masticatory movement, voice recognition, and eye blinking signals. The research work demonstrates that the device could potentially eliminate metallic sensors and be used for early disease diagnosis in biomedical and personal healthcare applications.

The cements industry is increasingly under pressure to reduce carbon emissions while maintaining performance standards. Limestone calcined clay cement (LC³) presents a promising low-carbon alternative; however, its performance depends significantly on the type and reactivity of clay used. This study investigates the effect of three common low-grade clay minerals—kaolinite, montmorillonite, and illite—on the behavior of LC³ blends. The clays were thermally activated and characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray fluorescence spectroscopy (XRF), and Blaine air permeability testing to evaluate their mineralogical composition, thermal behavior, chemical content, and fineness. Pozzolanic reactivity was assessed using the modified Chapelle test. Microstructural development was examined through scanning electron microscopy (SEM) of the hydrated specimens at 28 days. The results confirmed a strong correlation between clay reactivity and hydration performance. Kaolinite showed the highest reactivity and fineness, contributing to a dense microstructure with reduced portlandite and enhanced formation of calcium silicate hydrate. Montmorillonite demonstrated comparable strength and favorable hydration characteristics, while illite, though less reactive initially, showed acceptable long-term behavior. Although kaolinite delivered the best overall performance, its limited availability and higher cost suggest that montmorillonite and illite represent viable and cost-effective alternatives, particularly in regions where kaolinite is scarce. This study highlights the suitability of regionally available, low-grade clays for use in LC³ systems, supporting sustainable and economically viable cement production.

This study explores the potential of using natural textile packaging infused with algae-based coatings as an eco-friendly alternative to traditional plastic packaging for extending fruit shelf life. Traditional plastic packaging is known to release harmful chemicals into both food and the environment, which underscores the need for safer, more sustainable alternatives. This study investigates algae from three distinct groups—green, red, and brown algae—renowned for their rich bioactive compounds that exhibit natural preservative properties. Algae powders were prepared via immersion in purified water, boiling, and mixing with gum arabic to form a gelatinous coating solution. The algae coating was applied to knitted fabric, which was then crafted into bags for storing fruits such as tomatoes and apples. Over 21 days, the texture, weight loss, and juice content of the fruits stored in algae-coated bags were monitored and compared to those stored in uncoated packaging. The results showed that fruits in algae-coated packaging demonstrated significantly less weight loss and retained better texture. In terms of weight, the combination of red, green, and brown algae-coated packaging demonstrated the lowest reduction in weight for tomatoes (4.2%) and apples (3.8%) after 21 days, outperforming uncoated packaging, which exhibited reductions of 11.2% and 10.8%, respectively. These findings support the potential of algae-coated textile packaging to reduce reliance on conventional plastics while maintaining fruit quality during storage.

This study explores the sustainable extraction and application of natural dyes from figs (Ficus carica) and Eucalyptus leaves using an aqueous alkaline medium. The dyeing process was optimized for cotton fabric using the exhaust-dyeing method. Fabrics dyed with Ficus carica extract and its blend with Eucalyptus exhibited enhanced color strength, excellent crocking fastness (rated 4–5), and good washing fastness (rated 3–4 on the gray scale). The use of Aloe barbadensis Miller as a bio-mordant significantly improved dye fixation, resulting in deeper, earthy shades, such as green, yellow–green, and yellowish brown. The highest K/S value (5.85) was recorded in samples treated with a mordant, sodium chloride (NaCl), and the combined dye extracts, indicating a synergistic effect among the components. Mosquito repellency tests revealed that treated fabrics exhibited up to 70% repellency, compared to just 20% in undyed samples. Antibacterial testing against E. coli showed that dyed fabrics achieved over 80% bacterial reduction after 24 h, indicating promising antimicrobial functionality. Air permeability slightly decreased post-dyeing due to the potential shrinkage in cotton fabrics. Furthermore, adsorption studies showed a removal efficiency of 57% for Ficus carica dye on graphene oxide (GO) under ultrasonication. These findings confirm the potential of GO as an effective adsorbent material for treating wastewater from natural textile dyes. Overall, the study highlights the environmental safety, functional performance, and multifunctional advantages of plant-based dyeing systems in sustainable textile applications.

This study investigates the fabrication of microcapsules using Nigella sativa (N.S.) oil as the core and alginate as the shell material. The N.S. oil microcapsules were prepared using the sol–gel method with different oil concentrations. The microcapsules were applied to the cotton fabric by the pad–dry–cure method, and their attachment was evidenced by scanning electron microscopy (SEM). Air permeability measurements were conducted for all developed samples, revealing that the sample with 8 g loading of N.S. oil and 4.5 g alginate exhibited a 43% reduction compared to the pristine sample. To further investigate the comfort characteristics of the samples, the functionalized cotton samples were subjected to the water vapor permeability index test. The results yielded an index value of 90, indicating that the encapsulation process preserved the comfort characteristics of the samples. Among the samples, the specimen with an oil concentration of 8 mL displayed the maximum antibacterial performance, achieving a 90% reduction in colony-forming units (CFUs) following quantitative testing protocol. However, the qualitative antibacterial assessment indicates no clear zone of inhibition, but no bacterial growth was observed on the samples. Furthermore, the fabric incorporating the maximum loadings of N.S. oil and alginate capsules exhibited the maximum antioxidant activity of 86.5%. These results underscore the critical role of N.S. oil microcapsules in enhancing the antibacterial and antioxidant properties of cotton fabric, while also revealing a harmony between functional performance and comfort characteristics.

The textile sector is a major source of global pollution and resource depletion, generating waste at every stage of production, from spinning to garment manufacturing. This study addresses the critical need for sustainability in the textile industry by exploring the recycling of pre- and post-consumer textile waste to produce terry fabric. This research emphasizes a sustainable approach to recycling, utilizing pre-consumer waste, such as blowroom and carding waste, alongside post-consumer waste from discarded garments. These recycled fibres were spun into yarn and woven into terry fabric, and their properties compared to those of virgin cotton terry. While virgin cotton terry exhibited minor advantages in visual and tactile qualities, other properties remained consistent across all samples. A cost analysis further demonstrated the feasibility of producing medium to high-quality terry fabric from recycled yarn, providing a cost-effective alternative to virgin cotton. The research work contributes to the advancement of sustainable textile production, underscoring the potential of recycling to mitigate the environmental impact of the textile industry.