Ahmad Al Shra'ah

Dr. Ahmad Al Shra'ah


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Abdullah Al-FawwazAbdullah Al-Fawwaz
Abdullah Al-Fawwaz
ASAhmad Al Shra'ah
Ahmad Al Shra'ah
EEEngy Elhaddad
Engy Elhaddad
Algae provide an alternative, sustainable, and environmentally beneficial method of dyetreatment. In this study, algae were successfully used to remove methylene blue (MB) from aqueous solutions. The effects of several parameters, such as initial concentration of MB (5–25 mg L−1), algae dosage (0.02–0.1 g mL−1), temperature (4, 20, and 30 °C), and contact time (24, 48, 72 and 84 h), on MB removal were investigated. In addition, the characterization of MB before and after treatment was achieved using UV-spectrophotometer and Liquid chromatography-mass spectrometry (LC-MS). The experimental data were applied to three kinetic models, namely pseudo-first-order, pseudo-second-order, and Elvoich. Moreover, Langmuir, Freundlich, Dubinin–Raduskevich (D–R), and Temkin isotherm models were tested. The maximum removal efficiency of MB (~96%) was accomplished at optimum conditions at the initial concentration of MB (15 mg L−1), temperature (30 °C), and algae dosage (0.06 g mL−1) after 60 min of contact time. The removal of MB follows the pseudo-second-order kinetic model (R2 > 0.999), and the experimental data is best fitted by the Langmuir isotherm model (R2 > 0.9300).

30 May 2024 in Separations
Verified
Journal Article
Open access
PDF file
ASAhmad Al Shra'ah
Ahmad Al Shra'ah
Abdullah Al-FawwazAbdullah Al-Fawwaz
Abdullah Al-Fawwaz
MIMohammad M. Ibrahim
Mohammad M. Ibrahim
EAEid Alsbou
Eid Alsbou
This study aims to assess the ability of old, immobilized fresh, and free fresh green microalgae (a Bracteacoccus sp.) to remove methyl orange (MO) dye from aqueous solutions. The effects of four factors, including initial MO concentration (5–25 mg L−1), adsorbent dose (0.02–0.10 g mL−1), temperature (4–36 °C), and contact time (5–95 min), were examined. The Box–Behnken design (BBD) was used to determine the number of required experiments and the optimal conditions expected to provide the highest removal percentage of MO dye from aqueous solutions. The experimental data were applied to four isotherm models (Langmuir, Freundlich, Dubinin–Radushkevich (D–R), and Temkin isotherm models) and three kinetic models (pseudo–first–order, pseudo–second–order, and Elovich kinetic models). The results indicate that the highest removal of MO (97%) could be obtained in optimal conditions consisting of an initial MO concentration of 10.0 mg L−1, an adsorbent dose of 0.10 g mL−1, a temperature of 20 °C, and a contact time of 75 min. Moreover, the experimental data were best fitted by the Langmuir and Temkin isotherm models and followed a pseudo-second-order kinetic model. The interaction between MO and the Bracteacoccus sp. was confirmed by UV and ESI/MS analyses, indicating that MO removal occurred via both sorption and degradation processes.

13 October 2023 in Journal of Analytical Methods in Chemistry
Verified
Journal Article
Open access
PDF file
Mohanad MasadMohanad Masad
Mohanad Masad
SASamer Alawaideh
Samer Alawaideh
BNBasheer Nusairat
Basheer Nusairat
AAAli Alnawaiseh
Ali Alnawaiseh
ASAhmad Al Shra'ah
Ahmad Al Shra'ah
This study is the first to determine the concentration for 17 congeners of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and element contamination in poultry that is close to petroleum refinery at Al-Hashemiya Municipality, Zarqa Governorate, Jordan. Ten different samples (chicken) were collected to cover ten different locations of poultry farms in Al-Hashemiya Municipality. These locations are considered polluted areas as a result of exhaust gases produced from the refinery. The 17 PCDD/Fs congeners and elements of Pb, Cd, As, Zn, Cu, Se, Hg, Cr, and Ni were determined for three parts of each sample (liver, muscle, and gizzard). All samples were analyzed for PCDD/Fs after a Soxhlet extraction procedure and cleanup by column chromatography; then, all compounds were identified and determined using GC-MS techniques. The elements were analyzed after digestion and measured using an inductively coupled plasma optical emission spectrometer (ICP-OES) and validated with the Lab Mix24 RM NCS ZC73016 reference material. The highest total sum concentration of PCDD/Fs was found in liver samples to be 214.07ng/kg (dry weight), while the highest sum of toxicity equivalent to PCDD/Fs of 22.54ng TEQ/kg was found in gizzard samples. For element concentrations, the highest total sum of 16.89mg/kg (dry weight) was found in liver samples. The concentration level of the elements of Se, Hg, Cr, and Ni for all parts of the chicken was within an acceptable range according to Jordanian standards and therefore the measured level of heavy and trace elements in the poultry samples (chicken) does not pose a danger to public health. The chickens found in poultry farms near the refinery are more likely to contain a higher concentration of PCDD/Fs congeners due to exhaust gas exposure.

5 January 2024 in Chemistry Africa
Verified
Journal Article
Closed access
PDF file
ASAhmad Al Shra'ah
Ahmad Al Shra'ah
AAAbdullah T. Al-Fawwaz
Abdullah T. Al-Fawwaz
MIMohammad M. Ibrahim
Mohammad M. Ibrahim
MMMohanad Masad
Mohanad Masad
EEEngy Elhaddad
Engy Elhaddad