Shaoyi Xu

Prof. Shaoyi Xu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2019 in Energies
Verified
Journal Article
Open access
PDF file
CWChengtao Wang
Chengtao Wang
WLWei Li
Wei Li
YWYuqiao Wang
Yuqiao Wang
SXShaoyi Xu
Shaoyi Xu
KLKunpeng Li
Kunpeng Li
Electrochemical corrosion caused by stray currents reduces the lifespan of buried gas pipelines and the safety of light rail systems. Determining the scope of stray current corrosion will help prevent the corrosion of existing buried pipelines and provide an effective reference for new pipeline siting. In response to this problem, in this paper the surface potential gradient was used to evaluate the scope of stray current corrosion. First, an analytical model for the scope of the stray current corrosion combined with distributed parameters and the electric field generated by a point current source was put forward. Second, exemplary calculations were conducted based on the proposed model. Sensitivity of the potential gradient was analyzed with an example of the transition resistance, and the dynamic distribution of surface potential gradient under different locomotive operation modes was also analyzed in time-domain. Finally, the scope was evaluated at four different intervals with the parameters from the field test to judge whether the protective measures need to be taken in areas with buried pipelines and light rail systems nearby or not.

28 June 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SXShaoyi Xu
Shaoyi Xu
YHYingrui Huo
Yingrui Huo
CWChengtao Wang
Chengtao Wang
JLJiarui Lin
Jiarui Lin
BSBoxuan Shi
Boxuan Shi
FXFangfang Xing
Fangfang Xing
With the development of intelligent technologies in underground spaces, such as coal mines, 3D laser scanning technology has been widely applied for monitoring the deformation of surrounding rocks in these mines. However, the large amount of point cloud data obtained through 3D laser scanning technology is not conducive to efficient storage and rapid processing. Therefore, this paper proposes a novel feature-preserving method for simplifying the surface point cloud of an underground space tunnel. Firstly, the fusion criterion is constructed based on curvature, normal vector variation degree, and point-to-tangent plane distance. Based on this, feature points are selected. Then use the octree and cluster the divided set of non-feature points. Use the farthest point sampling (FPS) method to complete the simplification work in each cluster. In the experimental part, the Fandisk dataset is used to verify the superiority of the feature point selection method. The Bunny dataset is used to show the superiority of the whole algorithm. Finally, use the real underground tunnel data to show the feasibility and superiority of the algorithm in a specific real-world environment. The publicly WHU-TLS dataset and a coal mine dataset (C-M dataset) are used in this part. The C-M dataset is obtained by our measurements under real conditions in Shenmu County, Shaanxi Province, China. When set the simplification rate of the right-side point cloud of the C-M dataset is 30%. Compare the standard deviation of the proposed method, the random sampling method (RSM), the voxel grid method (VGM), and the curvature sampling method (CSM). The standard deviation of the proposed method can be reduced by about 35% at most. It is further demonstrated that the proposed method can better maintain the geometric features while ensuring the simplification rate.

19 September 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
SXShaoyi Xu
Shaoyi Xu
JSJunwen Sun
Junwen Sun
CWChengtao Wang
Chengtao Wang
FXFangfang Xing
Fangfang Xing
The insulation performance of fasteners in the running rails is one of the important factors affecting stray current leakage. Thus, it is of great significance for realizing the detection of insulation degradation location to the safe operation of rail transit system. In this work, insulation degradation location method of rail transit system is proposed based on the central wavelength variation of fiber grating voltage sensor. In this method, the potential distribution of insulation fasteners under different insulation damage conditions was studied for unilateral power supply. Results show that voltage drop of insulation fasteners can serve as the detection parameter of insulation degradation location. Combined with the distributed monitoring requirements of rail insulation degradation, a high-resolution two-end cemented FBG sensor was proposed with optimized structure. The effects of cementation layer and fiber grating (FBG) pasting process on strain transfer and sensitivity of fiber grating voltage sensors were investigated. Finally, an experimental system for the insulation degradation location of rail transit system based on FBG voltage sensor was built for performance verification. Different insulation degradation positions were set to analyze the voltage drop distribution of insulation fasteners. Experimental results indicate that the voltage drop distribution of the insulation fasteners is obviously affected by the location of insulation degradation, and accurate determination of these locations can be achieved by identifying abrupt changes in the central wavelength variation distribution.

21 April 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SXShaoyi Xu
Shaoyi Xu
TFTingyu Feng
Tingyu Feng
FXFangfang Xing
Fangfang Xing
As an optical measurement method, fringe projection three-dimensional (3D) measurement technology will have poor measurement effect due to overexposure or too dark of the fringes when measuring high dynamic range (HDR) surfaces. The adaptive fringe projection method is one of the effective methods to solve the HDR surfaces measurement, but pixel matching is the difficulty. The existing matching methods generally use phase for matching, which requires at least 24 additional patterns to be projected, seriously affecting the measurement efficiency. In order to solve these problems, an adaptive fringe projection measurement method using speckle pattern for pixel matching is proposed in this paper. First, two grayscale patterns are projected to calculate the adaptive projection intensity. Then a speckle pattern is projected to match the pixels of the captured pattern and the projected pattern. Finally, the adaptive fringe patterns are generated. Better than the methods before, only three additional patterns are needed to be projected to realize the measurement of the HDR surfaces. The experimental results show that the proposed method can reduce the number of projected patterns by more than 59.5% while achieving similar measurement accuracy, which greatly improves the measurement efficiency.

15 November 2024 in Optical Fiber Technology
Verified
Journal Article
Closed access
FPFubin Pang
Fubin Pang
XGXianghong Gu
Xianghong Gu
XDXing Deng
Xing Deng
YCYingxin Chen
Yingxin Chen
SXShaoyi Xu
Shaoyi Xu

25 October 2021 in Applied Optics
Verified
Journal Article
Closed access
PDF file
SXShaoyi Xu
Shaoyi Xu
QPQiang Peng
Qiang Peng
FXFangfang Xing
Fangfang Xing
JSJunwen Sun
Junwen Sun
Stray current affects the safe operation of subway equipment. The stray current leakage point can be located by measuring the current of subway running track. A magnetostrictive current sensor with high sensitivity and a large linear range is proposed to monitor track current. The design of the sensor is qualitatively guided by a set of finite element method (FEM) simulations to improve the sensitivity of the sensor. However, when the sensitivity of the sensor increases, the linear range decreases. To solve this problem, a novel current sensor, to the best of our knowledge, which is composed of magnetostrictive composites, steel bars, and adjustable coils, is presented. The linear range of the sensor is expanded by adjusting the different DC bias magnetic fields generated by the adjustable coils. The results show that when the measured current is 0–500 A and 500–1000 A, the Terfenol-D (TD) mass is only 0.14 g, and the sensitivity of the sensor is 0.391 µɛ/A and 0.418 µɛ/A, respectively. The current measurement with low cost, high sensitivity, and larger linear working range is realized, which is suitable for monitoring stray current leakage points.