Routing protocol for low power and lossy networks (RPL) is the underlying routing protocol of 6LoWPAN, a core communication standard for the Internet of Things. In terms of quality of service (QoS), device management, and energy efficiency, RPL beats competing wireless sensor and ad hoc routing protocols. However, several attacks could threaten the network due to the problem of unauthenticated or unencrypted control frames, centralized root controllers, compromised or unauthenticated devices. Thus, in this paper, we aim to investigate the effect of topology and Resources attacks on RPL.s efficiency. The Hello Flooding attack, Increase Number attack and Decrease Rank attack are the three forms of Resources attacks and Topology attacks respectively chosen to work on. The simulations were done to understand the impact of the three different attacks on RPL performances metrics including End-to-End Delay (E2ED), throughput, Packet Delivery Ratio (PDR) and average power consumption. The findings show that the three attacks increased the E2ED, decreased the PDR and the network throughput, and degrades the network’, which further raises the power consumption of the network nodes.
The RPL (IPv6 Routing Protocol for Low-Power and Lossy Networks) protocol is essential for efficient communication within the Internet of Things (IoT) ecosystem. Despite its significance, RPL’s susceptibility to attacks remains a concern. This paper presents a comprehensive simulation-based analysis of the RPL protocol’s vulnerability to the decreased rank attack in both static and mobile network environments. We employ the Random Direction Mobility Model (RDM) for mobile scenarios within the Cooja simulator. Our systematic evaluation focuses on critical performance metrics, including Packet Delivery Ratio (PDR), Average End to End Delay (AE2ED), throughput, Expected Transmission Count (ETX), and Average Power Consumption (APC). Our findings illuminate the disruptive impact of this attack on the routing hierarchy, resulting in decreased PDR and throughput, increased AE2ED, ETX, and APC. These results underscore the urgent need for robust security measures to protect RPL-based IoT networks. Furthermore, our study emphasizes the exacerbated impact of the attack in mobile scenarios, highlighting the evolving security requirements of IoT networks.
The RPL protocol is essential for efficient communication within the Internet of Things (IoT) ecosystem, yet it remains vulnerable to various attacks, particularly in dense and mobile environments where it shows certain limitations and susceptibilities. This paper presents a comprehensive simulation-based analysis of the RPL protocol’s vulnerability to the Hello Flood attack in mobile environments. Using four different group mobility models—the Column Mobility Model (CMM), Reference Point Group Mobility Model (RPGM), Nomadic Community Mobility Model (NCM), and Pursue Mobility Model (PMM)—within the Cooja simulator, this study uniquely investigates the Hello Flood attack in mobile settings, an area previously overlooked. Our systematic evaluation focuses on critical performance metrics, including the Packet Delivery Ratio (PDR), End-to-End Delay (E2ED), throughput, Expected Transmission Count (ETX), and Average Power Consumption (APC). The findings reveal several key insights: PDR decreases significantly, indicating increased packet loss or delivery failures; ETX values rise, necessitating more packet retransmissions and routing hops; E2ED increases, introducing delays in routing decisions and data transmission times; throughput declines as the attack disrupts data flow; and APC escalates due to higher energy usage on packet transmissions, especially over extended paths. These results underscore the urgent need for robust security measures to protect RPL-based IoT networks in mobile environments. Furthermore, our work emphasizes the exacerbated impact of the attack in mobile scenarios, highlighting the evolving security requirements of IoT networks.
24 November 2024 in Alexandria Engineering Journal
The Internet of Things (IoT) has witnessed a significant surge in adoption, particularly through the utilization of Wireless Sensor Networks (WSNs), which comprise small internet-connected devices. These deployments span various environments and offer a multitude of benefits. However, the widespread use of battery-powered devices introduces challenges due to their limited hardware resources and communication capabilities. In response to this, the Internet Engineering Task Force (IETF) has developed the IPv6 Routing Protocol for Low-power and Lossy Networks (RPL) to address the unique requirements of such networks. Recognizing the critical role of RPL in maintaining high performance, this paper proposes a novel approach to optimizing power consumption. Specifically, it introduces a developed sensor motes topology integrated with a Radio Duty Cycling (RDC) mechanism aimed at minimizing power usage. Through rigorous analysis, the paper evaluates the power efficiency of this approach through several simulations conducted across different network topologies, including random, linear, tree, and elliptical topologies. Additionally, three distinct RDC mechanisms—CXMAC, ContikiMAC, and NullRDC—are investigated to assess their impact on power consumption. The findings of the study, based on a comprehensive and deep analysis of the simulated results, highlight the efficiency of ContikiMAC in power conservation. This research contributes valuable insights into enhancing the energy efficiency of RPL-based IoT networks, ultimately facilitating their widespread deployment and usability in diverse environments.