The current polyvinyl chloride (PVC) gel flexible actuators are facing challenges of high input voltage and an insufficient elastic modulus. In this study, we conducted a detailed study on the properties of PVC gel prepared by introducing the modifier polyvinyl chloride-vinyl acetate (P(VC-VA)). We compared a modified PVC gel with the traditional one in terms of the relative dielectric constant, mechanical modulus, and electromechanical actuation performance. Experimental results demonstrated that the introduction of P(VC-VA) enhanced the dielectric constant and reduced the driving electric field strength of PVC gels. The dielectric constant increased from 4.77 to 7.3. The electromechanical actuation performance increased by 150%. We employed the Gent model to fit the experimental results, and the actual experimental data aligned well with the expectations of the Gent model. The research results show that this type of plasticizing method effectively balanced the mechanical and electrical performance of PVC gels. This study summarizes the experimental results and performance analysis of PVC gels prepared using innovative plasticization methods, revealing the potential engineering applications of polymeric gels.
Dielectric elastomers (DEs) with high energy conversion density are highly desirable for flexible actuation and sensing applications. However, current DEs only perform well under electrical actuation, incapable of regulating interfacial interactions between materials and their environment, such as active control of electroadhesion and electrowetting-on-dielectric (EWOD). Herein, we report a method using polar small-molecule additives to enable electroactive interfacial regulation in DEs. For electroadhesion, the electroactive interface–enhanced dielectric elastomer (EIEDE) with a metal mesh electrode attains adhesion strength of 31.75 kilopascals at 14 megavolts per meter, which is 488 times greater than that before modification. For EWOD performance, the EIEDE induces droplet contact angle to decrease sharply from 83.15° to 9.92°, showing the best electric-field response among DEs and enabling functions like droplet transport and shape modulation. The EIEDE simultaneously integrates large-strain deformation with electroactive interfacial regulation, achieving breakthrough performance in superhigh electroadhesion and excellent EWOD performance.