As an emerging technology, reconfigurable intelligent surface (RIS) has attracted increasing attention due to the ability to configure the wireless propagation environment. Parallel multiple-input multiple-output (MIMO) visible light communication (VLC) is suitable for some scenarios, e.g., multi-user time-division multiple access for indoor VLCs. The application of RIS in VLC is a promising trend in the future, and this paper investigates the employment of RIS in a parallel MIMO VLC system with asymptotic capacity maximization. To this end, the RIS-aided parallel MIMO VLC channel model is derived in this paper under the point source assumption, and then, as for the non-convex optimization problem, instead of searching exhaustively for the optimal solution, we propose a low-complexity near-optimal relaxing particle swarm optimization (RPSO) algorithm to optimize the RIS parameters. Meanwhile, we discover that the convex relaxation is an effective method for the optimization problems. Finally, numerical results indicate the effectiveness of the proposed design of RIS, and meanwhile, the asymptotic capacity can be improved to a great degree by adopting RIS in the parallel MIMO VLC system.

As an emerging technology, reconfigurable intelligent surfaces (RISs) have been investigated to apply to visible light communication (VLC) systems to enhance the transmission capability of the systems, recently. However, the optimization of RIS location in VLC has not been studied. In this study, we first investigated RIS positioning design in VLC. Specifically, we set two indoor VLC scenarios with a VLC RIS composed of a mirror array. We set the achievable rates in different scenarios as the utility functions to optimize the position of the RIS array according to the placement of the access point (AP) and user. We found that the problems are nondeterministic polynomial (NP)-hard. Aiming at the different optimization problems, the particle swarm optimization (PSO) algorithm was used to confirm the optimal position of the RIS array. Unlike the traditional algorithm, we added an adaptive mutation mechanism to the algorithm to guarantee the randomness of the particle to search for the optimal solution. Finally, our simulation results showed that the proper position design of the RIS array can improve the communication performance to a greater degree, while the computational complexity required to solve the position optimization problems through the PSO algorithm can be significantly reduced compared with that required for the exhaustive search method in the case where both of the algorithms find the optimal solution.

This paper investigates the employment of reconfigurable intelligent surfaces (RISs) to improve the asymptotic capacity of the multiple-input single-output (MISO) visible light communication (VLC) system in the case of high signal-to-noise (SNR). For the RIS-aided MISO-VLC system based on mirror array, we regard the high-SNR asymptotic capacity with the input subject to peak-intensity constraints as a goal and formulate an asymptotic capacity maximization problem to find the optimal orientations of mirrors. As for the non-convex optimization problem, we convert it into a quadratic programming (QP) problem with hemispherical constraints and prove that it can be solved by computing the maximum eigenvalue of an equivalent matrix. Simulation results indicate that the asymptotic capacity is able to be improved significantly by adopting RIS in MISO-VLC systems. Meanwhile, we observe that the proper deployment scheme of RIS is able to enhance the degree of improvement through several simulations.

As a novel mode of indoor wireless communication, visible light communication (VLC) should consider the illumination functions besides the primary communication function. Dimming control is one of the most crucial illumination functions for VLC systems. However, the transmission efficiency of most proposed dimming control schemes changes as the dimming factor changes. A block coding-based dimming control scheme has been proposed for constant transmission efficiency VLC systems, but there is still room for improvement in dimming range and error performance. In this paper, we propose a dimming control scheme based on extensional constant weight codeword sets to achieve constant transmission efficiency. Meanwhile, we also provide a low implementation complexity decoding algorithm for the scheme. Finally, comparisons show that the proposed scheme can provide a wider dimming range and better error performance.

As a wireless communication which combines illumination and communication, visible light communication (VLC) has attracted great attention. In indoor VLC systems, multiple illumination devices are commonly employed, forming a natural multi-input multi-output (MIMO) communication system. In this paper, a spatial constellation design based on the optimal geometric shaping is proposed for the MIMO-VLC system with the peak-power and total average-power constraints. Firstly, we derive the optimal geometric shaping region for the MIMO-VLC system under the aforementioned power constraints. Subsequently, we intersect the scaled integer lattice with the optimal geometric shaping region and combine it with minimum-energy mapping to obtain a spatial constellation. Simulation results for indoor MIMO-VLC systems verify the superiority of our approach compared to conventional methods.

Geometric constellation shaping for multiple-input single-output optical wireless communication is considered in this paper. We first characterize the optimal shaping region, whose shaping gain may serve as a performance baseline for multidimensional constellation designs. Then, to approach this maximum shaping gain, we propose a novel constellation design based on modified truncated cubic shaping and existing signaling algorithms. Numerical results show that the gap between the maximum shaping gain and the shaping gain of the modified truncated cubic shaping is small, and significant performance gains over the benchmark schemes can be obtained.