The demand for alternative fueling methods to reduce the need for fossil fuels is not limited to the electrification of ground vehicles. More-electric and all-electric aircraft pose challenges, with extensive requirements in terms of power density, efficiency, safety, and environmental sustainability. This paper focuses on electrical machines and their components, especially for high-power applications like the main propulsion. The electrical machine is evaluated from different aspects, followed by a closer look at the components and materials to determine the suitability of the current standard materials and advanced technologies. Furthermore, the mechanical and thermal aspects are reviewed, including new and innovative concepts for the cooling of windings and for the use of additive manufacturing. Aircraft have special demands regarding weight and installation space. Following recent developments and looking ahead to the future, the need and the possibilities for light and efficient electrical machines are addressed. All of the approaches and developments presented lead to a better understanding of the challenges to be expected and highlight the upcoming opportunities in electrical machine design for the use of electric motors and generators in future aircraft. Several prototypes of electrical machines for smaller aircraft already exist, such as the electric drive of the Siemens powered Extra 330LE. The focus of this paper is to provide an overview of current technical possibilities and technical interrelations of high performance electric drives for aviation. A 1 MW drive is exemplified to present the possibilities for future drives for airplanes carrying a larger number of passengers. All presented techniques can also be applied to other drive power classes.
Active high-lift systems of future civil aircraft allow noise reduction and the use of shorter runways. Powering high-lift systems electrically have a strong impact on the design requirements for the electrical power supply of the aircraft. The active high-lift system of the reference aircraft design considered in this paper consists of a flexible leading-edge device together with a combination of boundary-layer suction and Coanda-jet blowing. Electrically driven compressors distributed along the aircraft wings provide the required mass flow of pressurized air. Their additional loads significantly increase the electric power demand during take-off and landing, which is commonly provided by electric generators attached to the aircraft engines. The focus of the present study is a feasibility assessment of alternative electric power supply concepts to unburden or eliminate the generator coupled to the aircraft engine. For this purpose, two different concepts using either fuel cells or batteries are outlined and evaluated in terms of weight, efficiency, and technology availability. The most promising, but least developed alternative to the engine-powered electric generator is the usage of fuel cells. The advantages are high power density and short refueling time, compared to the battery storage concept.
This paper presents some of the progress in research on efficient high-lift systems for future civil aircraft achieved by the Coordinated Research Centre CRC 880 sponsored by the German Research Foundation. Several new approaches to increasing the lift are applied as part of the design of a reference aircraft with short take-off and landing capability: The numerically predicted positive effect of Coanda jet blowing at the trailing edge \ud flap is validated in water tunnel experiments. Robust miniature pressure and hot-fi�lm sensors are developed for the closed-loop control of a piezo-actuated blowing lip. A flexible leading-edge device utilizes composite materials, for which new structural designs are developed. Additionally, a potential de-icing system, as well as a lightning-strike protection are presented. A high power-density electrically driven compressor with a broad operating range is designed to provide the blowing air\ud ow. Different propulsion systems for the reference aircraft are evaluated. An ultra-high bypass ratio engine is considered\ud to be most promising, and thus a preliminary fan stage design process is established. The rotor dynamic influences of the engine on the aircraft structure are investigated through a hybrid approach using a multibody model and modal reduction
This paper reviews several methods to identify the eddy current losses in the permanent magnets of a high-speed high power density synchronous machine for an aircraft application. The rotor losses of such a machine are of particular importance, as the cooling of the rotor is poor. They originate from higher time harmonics in the voltage supply of the machine from inverters and from the spatial harmonics due to the slot openings of the stator. Because a preliminary loss calculation should be possible without time-consuming finite-element simulations, especially during the design phase, a novel combined analytical-numerical method is shown and paired with another analytical method in order to consider the different loss sources and to save calculation time. The result is compared to a finite-element simulation.