In this study, several wood properties were investigated along with the longitudinal direction for oriental beech and caucasian fir trees grown in Turkey. Wood density, compression strength parallel to grain, chemical characteristics (holocelluose, celluose, lignin), fiber dimensions (fiber length, fiber width, fiber lumen width, fiber cell wall thickness) were measured from the sapwood of the discs taken at the stem heights of 1,30; 6,30 and 12,30 meters. Both wood species showed clear trends in wood properties along longitudinal direction. For both wood species, the highest values in density, compression strength, volumetric shrinkage and swelling were at 1,30 m stem height, and the investigated parameters decreased along with the stem height, while longitudinal shrinkage and swelling percentage increased. The highest cellulose content was found at 1,30 m stem height, and the highest lignin content was found at 12,30 m stem height for both wood species. The longest fibers and the thickest fiber walls were determined at 1,30 m stem height in both wood species. These results clearly indicated that stem height greatly affected the investigated wood properties for both wood species.
Knowing the effects of natural aging on wood properties is important both for the conservation of historical wooden material and for reuse of aged wood. The aim of this study was to investigate the wood properties of old wooden elements not impregnated with any protective chemicals and taken from different parts of Zeytinlik houses in Giresun, Turkey. Test samples were prepared from old wooden elements and freshly cut chestnut timber. The anatomical, chemical, physical and mechanical properties were determined according to standard procedure, and the results were compared with those of recent wood specimen. As a result of the anatomical identification, it was determined that the wooden elements used in traditional Zeytinlik houses belong to species of Anatolian chestnut (Castanea sativa), and after an average service life of 88, 113 and 120 years, there was no change in the anatomical structure of the old wooden elements. Fourier transform infrared band characterization of old wood specimens revealed that hemicelluloses degraded and lignin structure changed on the surface of almost all specimens. Especially, the wood density values of the facade elements were smaller than that of recent wood specimen. Except for the modulus of rupture of window sill and rafter, all mechanical properties were significantly greater compared with those of recent wood specimen. The results of this research showed that old wood not damaged by fungi and insects could be evaluated for reuse.
This paper investigates the changes in density, compression strength parallel to grain, static modulus of rupture and modulus of elasticity of untreated (control) and waterborne-treated bamboo (Phyllostachys bambusoides), Scots pine...
Bu çalışmada, Doğu Karadeniz Bölgesi’nde yetişen Diospyros lotus L. (hırnık), Olea europaea L. (zeytin), Eriobotrya japonica (Thunb.) Lindl. (yenidünya) ağaçlarının gövde odunlarının anatomik özellikleri araştırılmış ve lif özelliklerinin kâğıt üretimi açısından uygunluğu değerlendirilmiştir. Hacim yoğunluk değeri, TS 2472’ye göre belirlenmiştir. Gövde odunlarının anatomik özelliklerine ait ölçüm ve sayımlar yapılmış ve üç kesite ait mikrofotoğraflar çekilmiştir. Lif özellikleri ve boyutları “Schultze” maserasyon yöntemi ile belirlenmiştir. Hesaplanan hacim yoğunluk değerine göre zeytin ağacı gövde odununun ticari kâğıt hamuru odunları için istenen değerler arasında olduğu belirlenmiştir. Dağınık traheli odunlara sahip olan üç meyve ağacının gövde odunlarının lif çeper kalınlığı ve lif uzunluğu değerleri birbirlerine yakın olmakla birlikte, zeytin ağacı daha geniş lif ve lümenlere sahiptir. Lif boyutlarına bağlı olarak hesaplanan oranların değerlendirilmesi sonucunda ise zeytin ağacı gövde odunu liflerinin ince çeperli esnek lifler sınıfında olduğu belirlenmiştir. Diğer iki meyve ağacının gövde odunu lifleriyle kıyaslandığında zeytin ağacı gövde odunu liflerinin kâğıt hamuru üretimi için daha uygun olduğu sonucuna ulaşılmıştır.
Identifying wood species of each wood element of a historical wooden building and investigating the changes in wood properties due to exposed outdoors during its service life are important prerequisites for the maintenance and renovation of historical wooden buildings. In the present study, the changes in wood properties occurring during natural aging of two facade elements taken from a traditional house, which has a service life of approximately 100 years, were investigated. Destructive tests were used for the experiments. The wood species, moisture content, wood density, water absorption rate and chemical structure of both facade elements were determined. Microscopic analysis revealed that the molding was made from the wood of Scots pine (Pinus sylvestris) and the window jamb was made from chestnut (Castanea sativa). It was found that the cellulose and lignin on the outer surface of aged woods of both facade elements were degraded according to the FTIR analysis. The moisture and density values of aged wood for both facade elements were smaller than those of recent wood. The water absorption rates of aged woods of both molding and window jamb increased with natural aging.