Flight parameters are crucial criteria for UAV control, playing a significant role in ensuring the safe and efficient completion of missions. Launch force and airspeed information are key parameters in the early and middle stages of flight, serving as important data for monitoring the UAV’s flight status. In response to challenges such as weak launch force, low identification rates, small airspeed, and low recognition accuracy in UAVs, a method for identifying UAV flight parameters based on launch force and airspeed is proposed. From the aspect of launch force identification, a recognition method based on a low-g value accelerometer information source is proposed, utilizing a ‘multi-level time window + threshold’ approach. For airspeed identification, an optimization method for airspeed measurement under the Kalman filter architecture is introduced. A device for airspeed measurement based on pressure sensors is designed, and the recommended installation position is determined through simulation. Furthermore, the feasibility and robustness of the proposed launch force identification and airspeed measurement optimization methods are validated through simulation. Finally, the effectiveness of the design is verified through centrifuge and wind tunnel experiments. This research provides technical support for the identification of the launch force and airspeed measurement in UAVs.
Airspeed measurement is crucial for UAV control. To achieve accurate airspeed measurements for UAVs, this paper calculates airspeed data by measuring changes in air pressure and temperature. Based on this, a data processing method based on mechanical filtering and the improved AR-SHAKF algorithm is proposed to indirectly measure airspeed with high precision. In particular, a mathematical model for an airspeed measurement system was established, and an installation method for the pressure sensor was designed to measure the total pressure, static pressure, and temperature. Secondly, the measurement principle of the sensor was analyzed, and a metal tube was installed to act as a mechanical filter, particularly in cases where the aircraft has a significant impact on the gas flow field. Furthermore, a time series model was used to establish the sensor state equation and the initial noise values. It also enhanced the Sage–Husa adaptive filter to analyze the unavoidable error impact of initial noise values. By constraining the range of measurement noise, it achieved adaptive noise estimation. To validate the superiority of the proposed method, a low-complexity airspeed measurement device based on MEMS pressure sensors was designed. The results demonstrate that the airspeed measurement device and the designed velocity measurement method can effectively calculate airspeed with high measurement accuracy and strong interference resistance.
To achieve precise collaborative localization of multiple unmanned aerial vehicles (UAVs) in hardware environments, this paper presents an field-programmable gate array-based particle swarm optimization (PSO) algorithm aimed at enhancing the localization efficiency of multiple nodes targeting a specific object. By leveraging the unique computational capabilities of FPGA, the proposed algorithm integrates optimization strategies, including particle mutation, variable crossover probabilities, and adjustable weights. These strategies collectively enhance the performance of the PSO algorithm in localization tasks. Comparative simulations conducted across a range of operational scenarios demonstrate that the algorithm not only ensures high localization accuracy but also delivers excellent real-time performance and rapid convergence. To further validate the algorithm’s practical applicability, a four-node collaborative localization platform was developed, and experiments were carried out. The results confirmed the feasibility of multi-node collaborative localization, underscoring the advantages of the proposed algorithm, such as high accuracy, fast convergence, and robust stability.
To address the poor adaptability and rigid initiation modes of the loitering munition fuze in complex environments and the inadequacy of single fuzzy control against strong interference, this paper proposes a dual-loop adaptive reconfiguration control method. The architecture integrates the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm with fuzzy logic. The inner loop uses TD3 to dynamically optimize fuzzy scaling factors based on real-time interference and state deviations. Concurrently, the outer loop utilizes a Fuze Readiness Index (FRI) and a finite state machine to manage real-time multi-modal mission switching (e.g., proximity, delay, and airburst) and reverse safety-state conversions. Co-simulations under non-stationary composite interference show that the proposed method reduces the burst height RMSE by 82.4% and 61.6% compared with the fixed-threshold and standard fuzzy baselines under the considered non-stationary composite interference setting, respectively. The false alarm rate (FAR) is reduced to 0.15%, and the reconfiguration response time under sudden interference is shortened to 12 ms. Even under extreme conditions, such as 400 ms sensor signal loss, the relative error remains within 5%. These simulation results demonstrate the potential of the proposed architecture to improve precision, responsiveness, and robustness under dynamic interference conditions and show good robustness to intermittent observation loss within the simulated operating envelope.