This paper presents a novel set-up designed to investigate plastic deformation of a metal at high strain rates. The set-up is similar to conventional split Hopkinson pressure bar but the striker bar is eliminated and instead of it a spherical projectile, accelerated to high velocity with a two-stage light-gas gun, impacts and penetrates in a steel plate attached to the input bar. This results in propagation of plane waves in the bars and the sample. Impacts were carried out by aluminum spherical projectiles with diameter of 3.5 mm and velocity between 2 and 2.5 km/s onto front plates with thickness 10 mm and diameter of 55mm; the thickness of samples was between 3 and 7 mm. The experimental results were compared with 3D finite element simulation. Also, the effect of projectile velocity and sample thickness were investigated through experimental tests.
1 December 2006 in International Journal of Impact Engineering
In this study, multifunctional panels with structural and self-healing capabilities were experimentally investigated under high velocity impact conditions. The panels were composed of two layers, one made of fiber-reinforced plastics (FRP) and the other of a self-healing ionomer, assembled in four different configurations with surface density ranging from 6.85 to 7.49 kg/m2. A total number of 16 impact experiments are reported, where spherical aluminium projectiles with diameters from 2.3 to 4.5 mm were shot at impact velocity, which varied from 2.0 to 2.5 km/s. The panel response was analysed in terms of (1) impact damage; and (2) capability to protect equipment located behind the panel from the cloud of fragments ejected downrange after panel perforation. Successful hole sealing was observed in panels consisting of a carbon FRP laminate and ionomer plate hit by projectiles up to 3.5 mm in diameter. The damage of the target was somewhat smaller when the ionomer was on the panel’s rear side. Suc...
Space debris represent a threat to satellites in orbit around Earth. In the case of impact, satellites can be subjected to damage spanning from localized craterization to subsystem failure, to complete loss of the vehicle; large collision events may lead to fragmentation of the spacecraft. Simulating and testing debris impacts may help in understanding the physics behind these events, modelling the effects, and developing dedicated protection systems and mitigation strategies. In this context, the Space Debris group at the University of Padova investigates in-space collisions with experimental campaigns performed in a dedicated Hypervelocity Impact Facility and with numerical simulations with commercial and custom software. In this paper, an overview is given of the last 10 years of research activities performed at the University of Padova. First, the hypervelocity impact testing facility is described and the main experimental campaigns performed in the last few years are summarized. The second part of this work describes impact modelling research advances, focusing on the simulation of complex collision scenarios.
24 September 2024 in International Journal of Impact Engineering