In this paper, the seismic vulnerability of Mashhad city, as the second largest city in Iran, has been investigated using analytical fragility curves. Disaggregation analysis is first performed in order to identify the target epsilon at different hazard levels. The disaggregation results revealed different epsilon values at the first mode period of two representative structures, in the case of 72-, 475-, and 2,475-year return periods. Nonlinear incremental dynamic analyses are then performed for two representative models of a typical steel frame with a concrete shear wall, using independent suites of acceleration time histories that are selected based on the target epsilons. Structural limit states are defined on each incremental dynamic analysis curve, and the corresponding damage measures are estimated. The results show that if ϵ is neglected in the considered simulations, then the predicted median structural capacities is decreased by around 10%, 15%, and 18%, respectively, for the three abovementioned hazard levels.
The ground external columns of buildings are vulnerable to the extreme actions such as a vehicle collision. This event is a common scenario of buildings' damages. In this study, a nonlinear model of 2-story steel moment-resisting frame (SMRF) is made in OpenSees software. This paper aims investigating the reliability analysis of aforementioned structure under heavy vehicle impact loadings by Monte Carlo Simulation (MCS) in MATLAB software. To reduce computational costs, meta-model techniques such as Kriging, Polynomial Response Surface Methodology (PRSM) and Artificial Neural Network (ANN) are applied and their efficiency is assessed. At first, the random variables are defined. Then, the sensitivity analyses are performed using MCS and Sobol's methods. Finally, the failure probabilities and reliability indices of studied frame are presented under impact loadings with various collision velocities at different performance levels and thus, the behavior of selected SMRF is compared by using fragility curves. The results showed that the random variables such as mass and velocity of vehicle and yield strength of used materials were the most effective parameters in the failure probability computation. Among the meta-models, Kriging can estimate the failure probability with the least error, sample number with minimum computer processing time, in comparison with MCS.
12 July 2021 in Journal of Building Pathology and Rehabilitation