The quadratic program (QP) with equality constraint is widely involved in science and engineering fields. Numerous solutions to the equality-constrained QP (ECQP) have been reported, particularly the zeroing neural network (ZNN) for the time-dependent ECQP. However, such solutions can be severely affected by the harmonic noise and may lose their efficacy. This study aims to address the above limitation by proposing the new ZNN model against harmonic noise with the only known frequency. Such a model, called the harmonic noise rejection ZNN (HNR-ZNN) model, is established by incorporating the dynamics of the harmonic signal (from which the unknown information for the signal's amplitude and phase can be eliminated). Theoretical analysis indicates that the proposed HNR-ZNN model effectively determines the optimal solution of time-dependent ECQP under harmonic noise interference. Comparative computer simulations and real-world robot applications further indicate the validity, excellence, and practicality of the presented HNR-ZNN model.
2 August 2024 in IEEE Transactions on Industrial Electronics
Repetitive motion planning (RMP), obstacle avoidance (OA), and joint-limit avoidance (JLA) are essential for ensuring the positioning accuracy and safe operations of joint-constrained redundant robots during cyclical tasks. This article first establishes a position-level RMP-OA-JLA scheme, which is eventually reformulated as a general quadratic programming (QP) problem involving nonlinear constraints. Due to the existence of these nonlinear constraints, existing classical QP solvers, including open-source software packages like OSQP and qpOASES, are not applicable. To tackle such a situation, a zeroing neural network (ZNN) designed based on a nonlinear complementary problem (NCP) function and a decomposition technique, namely the NCP-ZNN solver, is designed and formulated to solve the QP with nonlinear constraints. For comparisons, three other neural solvers are also designed using the decomposition technique to handle nonlinear constraints. Comparative simulations demonstrate that only the NCP-ZNN solver can be successfully applied to the position-level RMP-OA-JLA scheme. Moreover, two real Franka Emika Panda robots are employed for performance validation with experimental results further validating the feasibility and practicality of the position-level RMP-OA-JLA scheme and the NCP-ZNN solver.
1 November 2023 in IEEE Transactions on Industrial Informatics
Parallel robots including Gough–Stewart platforms are widely applied in industrial factories and medical fields. This article investigates a kinematically redundant Gough–Stewart robot, designs, and compares three novel zeroing neural networks (ZNNs) to serve as the redundancy-resolution controllers. Unlike the existing ZNN controllers, the newly designed ZNN controllers are endowed with the capability to handle joint constraints by using a nonlinear complementarity problem function without introducing any extra hyperparameters, guaranteeing the safety of the robot. The proposed ZNN controllers are training-free, noniterative, and more accurate, as compared with other typical neural controllers for kinematic control of the Gough–Stewart robot. Theoretically, the convergence analyses of the ZNN controllers are rigorously carried out. Corresponding discrete neural controllers are established and then applied to the kinematically redundant Gough–Stewart robot with two path-tracking tasks exemplified. The path-tracking results comparatively substantiate the effectiveness and superiority of the ZNN controllers for redundancy resolution under joint constraints.
Constrained nonlinear equations (CNEs) are involved in numerous practical applications, and many solutions to CNEs have been reported. In particular, a special neural network called zeroing neural network (ZNN) has recently been developed to solve the time-dependent CNE (TDCNE). In this study, we propose a new discrete-time ZNN (DTZNN) model to determine the numerical solution of the TDCNE. Such a model, which is derived from the discretization of the previous ZNN model via a special difference formula, can achieve excellent performance on computing and solving the TDCNE. Theoretical analysis and comparative numerical results further denote the validity and superiority of the proposed DTZNN model. Finally, the proposed model is used to simulate the dual-arm robot system, which verifies the practicability and feasibility of the DTZNN.