To study the interaction between sand particles and geogrids, pullout tests were performed on one type of geogrid in Pingtan medium sand. The sand motion around the ribs was captured by high-resolution digital camera and CCD camera. The images were analysed with the aid of digital photography measurement and micro-image analysis. Microscopic particle motion and displacement fields around the transverse ribs were then obtained to verify the macro behaviour of the sand–rib interaction. It was found that the thickness of shear band increases with the normal stress applied, and the shear zone is asymmetrical to the soil–rib interface. A near wedge shape shear zone was observed by analysing the shear strain around the ribs, which indicated that a punching shear failure mechanism may be applicable to the tested geogrid in medium-dense sand. Comparison of various models for bearing capacity of geogrids shows that the size and shape of bearing members should be considered in the calculation of bearing resistance of geogrids.

This paper presents a new method for applying reliability-based design approaches to slope stability analysis. In this method the soil properties are considered to be random variables. The factor of safety of the slope is found using Bishop’s simplified method for noncircular slip surfaces. By considering the variability of the soil properties, the probability of failure is determined from the reliability index (β) . The minimization problem (determination of the lowest β value for the range of variables and possible slip surfaces considered) is solved using a genetic algorithm approach, which simultaneously locates the critical slip surface and determines the reliability index. The performance of the new method is compared to some existing reliability approaches when applied to case histories of slope failures from the geotechnical literature. The new approach is seen to provide reasonable and consistent estimates of the reliability index and critical slip surface.