In a modern and globalized world, the advances in technology are rapid, especially in terms of energy generation through renewable sources, which is intended to mitigate global warming and reduce all the ravages that are currently occurring around the world. Photovoltaic and biomass generation sources are attractive for implementation due to the abundant energy resources they offer; however, the intermittency of these sources is a disadvantage when it comes to the needs of the load, decreasing the reliability of the system. Therefore, it is essential to use a backup and storage system such as a diesel generator and a battery bank to continuously supply the load demand. This work presents a case study to meet the energy needs of a community made up of 17 low-income homes on an island in the Gulf of Guayaquil in Ecuador. The optimization and economic evaluation of the hybrid system is achieved using specialized software, resulting in the optimized architecture of the renewable energy system based on the available resources of the locality. The architecture is made up of a 22 kW photovoltaic generator and a 1.5 kW biomass generator, while the diesel generator is 12 kW, the battery bank is made up of 58 units of 111 Ah, and the dispatch strategy is load tracking. The results of the economic evaluation indicate that the total cost of the system (TNPC) is USD 96,033, the initial cost for the implementation of the system is USD 36,944, and the levelized cost of energy is USD 0.276, which makes it attractive for implementation. The importance of this research lies in its practical approach to solving electrification challenges in isolated and low-income communities through a hybrid renewable energy system. By demonstrating how intermittent sources like solar and biomass can be effectively combined with backup and storage systems, the study provides a reliable, economically viable, and implementable solution, addressing both the global need to mitigate climate change and the local need for accessible energy in vulnerable regions.
1 September 2023 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Nowadays, renewable energy sources turned into a choice to fulfill the expanding load need since they are ecological inviting and furthermore accessible bountiful in nature. Due to the easy availability of solar-powered vitality, the photovoltaic (PV) system is gaining popularity as a renewable energy option. Most of the energy from a PV array may be dissipated by using the maximum power point tracking (MPPT) method. The force quality problems, the real and responsive force stream problems, are a major concern when transferring a mass measure of intensity from a PV array to the power grid. This research proposes a unique control technique for regulating the power flow and resolving power quality concerns brought on by the integration of PV arrays into an existing power infrastructure. For effective management of real and receptive force stream in matrix related photovoltaic framework, it includes a PI-GA, fuzzy-GA based flowed regulator dealt with adaptable AC transmission framework gadget, specifically static synchronous compensator (STATCOM). As a result, the fuzzy rationale regulator creates a control vector, which is in this way tweaked utilizing a standard calculation.
A model which is based on design will reduce the development cost of the system. There are different phases associated with complex models for systems like Electric Vehicles, these include Functional Specification definitions, Design specification, Test and authenticate and implementation. The case study done in this paper will be including only first two stages. The results will help to understand how the system designer can take decisions using simulation output. Simulation is a very complicated task which can represent simple design with precision and complex design with great accuracy that is almost near to the practical model. There is a compromise when making decisions with respect to precision and design complexity. It is always recommended to consider accurate models but when parameters are considered it is very difficult to determine parameters preferably in first stage of the model development and even the simulation of these accurate model is very slow. Hence a more detailed level of simulation model is needed. So, the system designer needs a complete overview of system power flow in the initial level of modelling. In the second level there is a need of designing more accurate model of different systems in which choosing an appropriate parameter for energy management system and power converters is needed. In this paper it can be clarified that a detailed design will validate the system’s behaviour with great accuracy and to conduct other adoptions as requires.
1 February 2024 in Bulletin of Electrical Engineering and Informatics
Solar photovoltaic (PV) system design and integration with an existing AC grid is growing very fast in recent years and used by many of them as they are pollution-free, structure is limited and maintenance free. From the factors considering, the performance of PV system depends upon the inverter output voltage tested for linear, non-linear, with harmonic, and without harmonic loads. Generated due to the nonlinear loads. Better inverter control techniques are developed to maintain grid power quality. This article discusses the analysis and comparison of pulse width modulation (PWM) converters with unique and state of the art nonlinear control schemes and various modulation approaches. The primary objective of this research is controlling an active filtering hysteresis PWM converter with no sensors. A simple structure with hysteresis current control method total harmonic distortion (THD) is lower when compared with the sinusoidal pulse width modulation (SPWM) method. The said claims are supported by employing computer simulations using MATLAB/Simulink and different control approaches, such as proportional plus integral and artificial neural network controllers.