Due to the limitation of the number of sensor pixels, optical splicing is commonly used to improve the imaging width of remote sensing satellites, and this optical stitching can cause vignetting in the image data of adjacent sensors. The weak energy, low signal-to-noise ratio, and poor response stability of vignetting are key factors that restrict the relative radiometric correction of optical splicing remote satellites. This paper proposes a stability analysis method and a relative radiometric correction method for vignetting. First, we analyzed the stability of the response and the noise impact of vignetting. Massive data from the Jilin-1 GF03D satellites was used to analyze the stability of the response using the vignetting stability analysis method. Secondly, the data on the deep sea during nighttime (DDSN) of Jilin-1 GF03D satellites was used to obtain the characteristics of the sensors’ noise. Thirdly, by building a noise drift model, we calculated the coefficient of the noise drift according to its characteristics. Using the coefficient to eliminate the noise drift of each pixel in vignetting can improve the response stability of vignetting. The average response stability increased by 37.64% by this method. Finally, the automatic relative radiometric correction method was completed through histogram matching. Furthermore, we proposed color aberration metrics (CAMs) to evaluate the multi-spectral images after relative radiometric correction, and massive data from the 16 satellites of Jilin-1 GF03D was used to verify the effectiveness and generality. The experimental results show that the average CAM of the images increased by 15.97% using the proposed method compared to the traditional method.

In recent years, the advancement of CubeSat technology has led to the emergence of high-resolution, flexible imaging satellites as a pivotal source of information for the efficient and precise monitoring of crops. However, the dynamic geometry inherent in flexible side-view imaging poses challenges in acquiring the high-precision reflectance data necessary to accurately retrieve crop parameters. This study aimed to develop an angular correction method designed to generate nadir reflectance from high-resolution satellite side-swing imaging data. The method utilized the Anisotropic Flat Index (AFX) in conjunction with a fixed set of Bidirectional Reflectance Distribution Function (BRDF) parameters to compute the nadir reflectance for the Jilin-1 GP01/02 multispectral imager (PMS). Crop parameter retrieval was executed using regression models based on vegetation indices, the leaf area index (LAI), fractional vegetation cover (FVC), and chlorophyll (T850 nm/T720 nm) values estimated based on angle corrected reflectance compared with field measurements taken in the Inner Mongolia Autonomous Region. The findings demonstrate that the proposed angular correction method significantly enhances the retrieval accuracy of the LAI, FVC, and chlorophyll from Jilin-1 GP01/02 PMS data. Notably, the retrieval accuracy for the LAI and FVC improved by over 25%. We expect that this approach will exhibit considerable potential to improve crop monitoring accuracy from high-resolution satellite side-view imaging data.

On-orbit absolute radiometric calibration is not only a prerequisite for the quantitative application of optical remote sensing satellite data but also a key step in ensuring the accuracy and reliability of satellite observation data. Due to the diversity of imaging conditions for optical remote sensing satellite sensors, on-orbit absolute radiometric calibration usually requires a large number of imaging tasks and manual labor to calibrate each imaging condition. This seriously limits the timeliness of on-orbit absolute radiometric calibration and is also an urgent problem to be solved in the context of the explosive growth of satellite numbers. Based on this, we propose a general on-orbit absolute radiometric calibration method compatible with multiple imaging conditions. Firstly, we use a large amount of laboratory radiometric calibration data to explore the mathematical relationship between imaging conditions (row transfer time, integration level and gain), radiance, and DN, and successfully build an imaging condition compatibility model. Secondly, we combine the imaging condition compatibility model with cross calibration to achieve a general on-orbit absolute radiometric calibration method. We use cross calibration to obtain the reference radiance and corresponding DN of the target satellites, which calculates the general coefficient by using row transfer time, integration level, and gain, and use the general coefficient to calibrate all imaging conditions. Finally, we use multiple imaging tasks of the JL1GF03D11 satellites to verify the effectiveness of the proposed method. The experiments show that the average relative difference was reduced to 2.79% and the RMSE was reduced to 1.51, compared with the laboratory radiometric calibration method. In addition, we also verify the generality of the proposed method by using 10 satellites of the Jilin-1 GF03D series. The experiment shows that the goodness of fit of the general coefficient is all greater than 95%, and the average relative difference between the reference radiance and the calibrated radiance of the proposed method is 2.46%, with an RMSE of 1.67. To sum up, by using the proposed method, all imaging conditions of optical remote sensing satellite sensor can be calibrated in one imaging task, which greatly improves the timeliness and accuracy of on-orbit absolute radiometric calibration.