The development of efficient waste valorization strategies has emerged as an important field in the overall efforts for alignment with the environmental goals that have been set by the European Union (EU) Green Deal regarding the development of sustainable circular economy models. Additive manufacturing has emerged as a sustainable method for secondary life product development with the main advantages of it being a form of net-zero waste production and having the ability to successfully transport complex design to actual products finding applications in the industry for rapid prototyping or for tailored products. The insertion of eco-friendly sustainable materials in these processes can lead to significant reduction in material footprints and lower energy demands for the manufacturing process, helping achieve Sustainable Development Goal 12 (SDG12) set by the EU for responsible production and consumption. The aim of this comprehensive review is to state the existing progress regarding the incorporation of sustainable polymeric composite materials in additive manufacturing (AM) processes and identify possible gaps for further research. In this context, a comprehensive presentation of the reacquired materials coming from urban and industrial waste valorization processes and that are used to produce sustainable composites is made. Then, an assessment of the printability and the mechanical response of the constructed composites is made, by taking into consideration some key thermal, rheological and mechanical properties (e.g., viscosity, melting and degradation temperature, tensile and impact strength). Finally, existing life cycle analysis results are presented regarding overall energy demands and environmental footprint during the waste-to-feedstock and the manufacturing processes. A lack of scientific research was observed, regarding the manifestation of novel evaluation techniques such as dynamic mechanical analysis and impact testing. Assessing the dynamic response is vital for evaluating whether these types of composites are adequate for upscaling and use in real life applications.

The convergence of 3D printing and auxetic materials is paving the way for a new era of adaptive structures. Auxetic materials, known for their unique mechanical properties, such as a negative Poisson’s ratio, can be integrated into 3D-printed objects to enable them to morph or deform in a controlled manner, leading to the creation of 4D-printed structures. Since the first introduction of 4D printing, scientific interest has spiked in exploring its potential implementation in a wide range of applications, from deployable structures for space exploration to shape-adaptive biomechanical implants. In this context, the current paper aimed to develop 4D-printed arterial stents utilizing bioinspired architected auxetic materials made from biocompatible and biodegradable polymeric material. Specifically, three different auxetic materials were experimentally examined at different relative densities, under tensile and compression testing, to determine their mechanical behavior. Based on the extracted experimental data, non-linear hyperelastic finite element material models were developed in order to simulate the insertion of the stent into a catheter and its deployment in the aorta. The results demonstrated that among the three examined structures, the ‘square mode 3’ structure revealed the best performance in terms of strength, at the same time offering the necessary compressibility (diameter reduction) to allow insertion into a typical catheter for stent procedures.

Topology optimization enables the design of advanced architected materials with tailored mechanical properties and optimal material distribution. This method can result in the production of parts with uniform mechanical properties, reducing anisotropy effects and addressing a critical challenge in metal additive manufacturing (AM). The current study aims to examine the micro-tensile response of Inconel 718 architected materials utilizing the Selective Laser Melting Technique. In this context, three novel architected materials, i.e., Octet, Schwarz Diamond (SD), and hybrid Schwarz Diamond and Face Centered Cubic (FCC), were tested in three different relative densities. The specimens were then subjected to uniaxial quasi-static tensile tests to determine their key mechanical properties, including elastic modulus, yield strength, and ultimate tensile strength (UTS), as well as the scaling laws describing the tensile response of each architected material. In situ Scanning Electron Microscopy (SEM) has been performed to observe the structure and grain morphology of the 3D printed specimens along with the phase transitions (elastic, plastic), the crack propagation, and the overall failure mechanisms. The results highlight the effect of the lattice type and the relative density on the mechanical properties of architected materials. Topologically optimized structures presented a 70–80% reduction in overall strength, while the SD and SD&FCC structures presented higher stretching dominated behavior, which was also verified by the n-value range (1–2) extracted from the identification of the scaling laws.

The development of prosthetic limbs has benefited individuals who suffered amputations due to accidents or medical conditions. During the development of conventional prosthetics, several challenges have been observed regarding the functional limitations, the restricted degrees of freedom compared to an actual human limb, and the biocompatibility issues between the surface of the prosthetic limb and the human tissue or skin. These issues could result in mobility impairments due to failed mimicry of the actual stress distribution, causing discomfort, chronic pain, and tissue damage or possible infections. Especially in cases where underlying conditions exist, such as diabetes, possible trauma, or vascular disease, a failed adaptation of the prosthetic limb could lead to complete abandonment of the prosthetic part. To address these challenges, the insertion of topologically optimized parts with a biomimetic approach has allowed the optimization of the mimicry of the complex functionality behavior of the natural body parts, allowing the development of lightweight efficient anthropomorphic structures. This approach results in unified stress distribution, minimizing the practical limitations while also adding an aesthetic that aids in reducing any possible symptoms related to social anxiety and impaired social functioning. In this paper, the development of a novel anthropomorphic designed prosthetic foot with a novel Thermoplastic Polyurethane-based composite (TPU-Ground Tire Rubber 10 wt.%) was studied. The final designs contain advanced sustainable polymeric materials, gyroid lattice geometries, and Finite Element Analysis (FEA) for performance optimization. Initially, a static evaluation was conducted to replicate the phenomena at the standing process of a conventional replicated above-knee prosthetic. Furthermore, dynamic testing was conducted to assess the mechanical responses to high-intensity exercises (e.g., sprinting, jumping). The evaluation of the dynamic mechanical response of the prosthetic limb was compared to actual plantogram-derived foot pressure data during static phases (standing, light walking) and dynamic phenomena (sprinting, jumping) to address the optimal geometry and density, ensuring maximum compatibility. This innovative approach allows the development of tailored prosthetic limbs with optimal replication of the human motion patterns, resulting in improved patient outcomes and higher success rates. The proposed design presented hysteretic damping factor and energy absorption efficiency adequate for load handling of intense exercises (0.18 loss factor, 57% energy absorption efficiency) meaning that it is suitable for further research and possible upcycling.