Difficulty in thrust-matching between the cruise and vertical take-off and landing (VTOL) phases is one of the prominent issues faced by conventional VTOL fixed-wing drones. To address this issue, a propeller-induced lift-enhancing (PILE) biplane wing VTOL configuration is proposed with the goal of lift enhancement on the wing during the no-forward-speed VTOL phase. Numerical simulation methods are used to study and analyze the aerodynamic characteristics of this configuration in the cruise and VTOL phases. The results show that the favorable inducing effect of the propeller makes the PILE configuration have a good effect of increasing lift and reducing drag compared with a single wing of the same area during the cruise phase, improving the lift-to-drag ratio by 7.27%. During the VTOL phase, the optimal tilt angle of the propeller for the PALE configuration is 70°, matched with an installation angle of 5° for the aided wing. This parameter combination balances the total drag while also achieving a lift-to-thrust ratio of 1.12. As a result, the required thrust of the propeller is reduced under the same take-off weight, which helps to alleviate the thrust-matching problem and enables VTOL with a smaller power cost.

Aerodynamic investigation of a bionic coaxial-rotors unmanned aerial vehicle (UAV) is performed. According to Chinese parasol seed features and flight requirements, the bionic conceptual design of a coaxial-rotors UAV is described. A solution procedure for the numerical simulation method, based on a multi-reference frame (MRF) model, is expressed, and a verification study is presented using the typical case. The aerodynamic design is conducted for airfoil, blade, and coaxial-rotors interference. The aerodynamic performance of the coaxial rotors is investigated by numerical simulation analysis. The rotor/motor integrated experiment verification is conducted to assess the performance of the coaxial-rotors UAV. The results indicate that the UAV has excellent aerodynamic performance and bionic configuration, allowing it to adapt to task requirements. The bionic UAV has a good cruise power load reach of 8.36 kg/kw, and the cruise flying thrust force is not less than 78 N at coaxial-rotor and rotor-balloon distance ratios of 0.39 and 1.12, respectively. It has the “blocks stability phenomenon” formed by the rotor downwash speed decreases and the balloon’s additional negative pressure. The present method and the bionic configuration provide a feasible design and analysis strategy for coaxial-rotors UAVs.