Jianfeng Tan

Dr. Jianfeng Tan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2018 in CEAS Aeronautical Journal
Verified
Journal Article
Open access
PDF file
JTJianfeng Tan
Jianfeng Tan
YSYi Ming Sun
Yi Ming Sun
TZTian Yi Zhou
Tian Yi Zhou
GBGeorge N. Barakos
George N. Barakos
RGRichard B. Green
Richard B. Green
The mutual aerodynamic interaction between rotor wake and surrounding obstacles is complex, and generates high compensatory workload for pilots, degradation of the handling qualities, and performance, and unsteady force on the structure of the obstacles. The interaction also affects the minimum distance between rotorcrafts and obstacles to operate safely. A vortex-based approach is then employed to investigate the complex aerodynamic interaction between rotors and ground obstacle, and identify the distance where the interaction ends, and this is also the objective of the GARTEUR AG22 working group activities. In this approach, the aerodynamic loads of the rotor blades are described through a panel method, and the unsteady behaviour of the rotor wake is modelled using a vortex particle method. The effects of the ground plane and obstacle are accounted for via a viscous boundary model. The method is then applied to a “Large” and a “Wee” rotor near the ground and obstacle, and compared with the earlier experiments carried out at the University of Glasgow. The results show that predicted rotor induced inflow and flow field compare reasonably well with the experiments. Furthermore, at certain conditions, the tip vortices are pushed up and re-injected into the rotor wake due to the effect of the obstacle resulting in a recirculation. Moreover, contrary to without the obstacle case, peak and thickness of the radial outwash near the obstacle are smaller due to the barrier effect of the obstacle, and an upwash is observed. In addition, as the rotor closes to the obstacle, the rotor slipstreams impinge directly on the obstacle, and the upwash near the obstacle is faster, indicating a stronger interaction between the rotor wake and the obstacle. In addition, contrary to the case without the obstacle, the fluctuations of the rotor thrust, and rolling and pitching moments are obviously strengthened. When the distance between the rotor and the obstacle is larger than 3R, the effect of the obstacle is small.

2 November 2024 in Journal of Global Optimization
Verified
Journal Article
Closed access
PDF file
SXShengguan Xu
Shengguan Xu
JTJianfeng Tan
Jianfeng Tan
JZJiale Zhang
Jiale Zhang
HCHong-Quan Chen
Hong-Quan Chen
YGYisheng Gao,
Yisheng Gao,

9 October 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
SXShengguan Xu
Shengguan Xu
MLMingyu Li
Mingyu Li
XWXiance Wang
Xiance Wang
YSYanting Song
Yanting Song
BTBingbing Tang
Bingbing Tang
JTJianfeng Tan
Jianfeng Tan
The complex jet-ground interactions of Short Take-off and Vertical Landing (STOVL) aircraft are critical to flight safety and performance, yet studying them with traditional full-scale wind tunnel tests is prohibitively expensive and time-consuming, hindering design optimization. This study addresses this challenge by developing and numerically verifying a “pressure ratio–momentum–geometry” multi-dimensional similarity framework, enabling accurate and efficient scaled-model analysis. Systematic simulations of an F-35B-like configuration demonstrate the framework’s high fidelity. For a representative curved nozzle configuration (e.g., the F-35B three-bearing swivel duct nozzle, 3BSD), across scale factors ranging from 1:1 to 1:15, the plume deflection angle remains stable at 12° ± 1°. Concurrently, axial force (F) and mass flow rate (Q) strictly follow the square scaling relationship (F∝1/n2, Q∝1/n2), with deviations from theory remaining below 0.15% and 0.58%, respectively, even at the 1:15 scale, confirming high-fidelity momentum similarity, particularly in the near-field flow direction. Second, a 1:13.25 scale aircraft model, constructed using Froude similarity principles, exhibits critical parameter agreement (intake total pressure and total temperature) of the prototype-including vertical axial force, lift fan mass flow, and intake total temperature—all less than 1.5%, while the critical intake total pressure error is only 2.2%. Fountain flow structures and ground temperature distributions show high consistency with the full-scale aircraft, validating the reliability of the proposed “pressure ratio–momentum–geometry” multi-dimensional similarity criterion. The framework developed herein has the potential to reduce wind tunnel testing costs and shorten development cycles, offering an efficient experimental strategy for STOVL aircraft research and development.

31 August 2025 in Actuators
Verified
Journal Article
Open access
PDF file
SXShengguan Xu
Shengguan Xu
SWSiyi Wang
Siyi Wang
HCHong-Quan Chen
Hong-Quan Chen
JTJianfeng Tan
Jianfeng Tan
WLWei Li
Wei Li
SYSHUAI YIN
SHUAI YIN
This study explores the critical role of the flow deflector in suppressing boundary layer separation and enhancing aerodynamic efficiency through systematic geometric parameterization and computational analysis. By defining eight key design variables, this research identifies optimal configurations that significantly delay flow separation at high angles of attack. Computational Fluid Dynamics (CFD) simulations reveal that optimized deflector geometries enhance suction peaks near the airfoil leading edge, redirect separated flow toward the upper surface, and inject momentum into the boundary layer to generate a more positive lift coefficient. The numerical results demonstrate that the optimized design achieves a 58.4% increase in lift coefficient and an 83.3% improvement in the lift–drag ratio by effectively mitigating large-scale vortical structures inherent in baseline configurations. Sensitivity analyses further highlight threshold-dependent “sudden-jump” behaviors in lift coefficients for parameters such as element spacing and deflection angles, while thickness exhibits minimal influence. Additionally, pre-stall optimizations show that strategically aligned deflectors preserve baseline performance with a 0.4% lift gain, whereas misaligned configurations degrade aerodynamic efficiency by up to 9.1%. These findings establish a direct correlation between deflector-induced flow redirection and separation suppression, offering actionable insights for passive flow control in stalled regimes. This research advances fundamental understanding of flow deflector-based separation management and provides practical guidelines for enhancing aerodynamic performance in aerospace applications.

20 June 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
XXXiaobing Xing
Xiaobing Xing
JTJianfeng Tan
Jianfeng Tan
YYYuxiao Yang
Yuxiao Yang
TYTian Yong
Tian Yong
LYLinjun Yu
Linjun Yu
YZYun Zhou
Yun Zhou
The shape and structure of helicopter fuselage are complex, and it is difficult for a finite element method (FEM) to investigate helicopter fuselage projectile damage in a multi-projectile environment. An efficient analysis method for helicopter fuselage projectile damage is then proposed by coupling the projectile breakdown theory, which is derived from the existing empirical formula for penetrating ductile metals, and the model of projectile impact. Then, the characteristics of the helicopter fuselage impact coordinate, residual velocity, and fuselage damage area under a multi-projectile attack are investigated. The results show that the predicted residual velocities agree with the experiments. The maximum errors of the residual velocity and the fuselage damage area are 4.7% and 9.56%, respectively. Compared with the FEM, the computational time of the proposed method is reduced by 92.1%, and its efficiency is obviously improved. As the incidence angle increases, the residual velocity decreases, and the damage area increases. When the incidence angle of the projectile body is large, the projectile body cannot penetrate the surface of the fuselage, resulting in flume skid damage and a large area of damage.