Wetting dynamics play a major role in many practical applications; however, many fundamental problems remain unresolved, especially in relation to the dynamic contact angle. The present study investigates the movement of a gas–liquid interface in an open microchannel with different materials and wettability. Using a high-speed microscope camera, the shape of the dynamic equilibrium of the gas–liquid interface in a flowing state was recorded, including the microscopic regions near the contact line. The results show that the effects of the surface wetting condition play a crucial role in altering the apparent dynamic contact angle. During the experiment, we observed an interesting phenomenon where the dynamic equilibrium contact angle under flow conditions is larger than the contact angle predicted by the Cox–Voinov law. This may be attributed to the existence of friction between the fluid and the wall surface under flow, which reduces the additional pressure at the gas–liquid interface, and the magnitude of friction is manifested through the hysteresis contact angle. The instability and periodic variation of the microscopic contact angle are caused by the surface heterogeneity near the contact line, namely, the spatial variation of solid–gas and solid–liquid interfacial tensions. Understanding the surface properties can help optimize the interface system's design and improve its efficiency for use.
Superhydrophobic coatings with photo-thermal effects have advantages in anti-/de-icing and self-cleaning. Here, an eco-friendly and low-cost fabrication of superhydrophobic coating was proposed by spraying a water-borne suspension including carbon black and paraffin wax onto substrate-independent surfaces. The a water-borne suspension coated on stain steel plate showed a strong water-repellence, delaying the ice freezing time to 665 s, which is much higher than that of bare stain steel plate (210 s) under the same experimental condition. The ice-melting time was measured as 120 s under a solar irradiation of 0.1 W/cm2, while the control group had no sign of ice-melting during the same time. As a concept of proof, the self-cleaning, anti-corrosion, and oil–water separation were enabled by spraying the water-borne suspension on various substrates, demonstrating its diverse performances. Hence, the water-borne superhydrophibic coating provides an efficient, safe, and sustainable solution for wettability-related applications.
Solar desalination is widely regarded as an effective way to solve freshwater scarcity. However, the balance between the costs of micro-nanostructures, thermal regulation, and the durability of interface evaporators must all be considered. In this study, a super-hydrophobic copper foam with hierarchical micro-nanostructures exhibited temperatures greater than 66 °C under solar illumination of 1 kW·m−2. Significantly, the modified copper foam acting as a solar interface evaporator had a water harvesting efficiency of 1.76 kg·m−2·h−1, resulting from its good photothermal conversion and porous skeleton. Further, the anti-deicing, self-cleaning, and anti-abrasion tests were carried out to demonstrate its durability. The whole fabrication of the as-prepared CF was only involved in mechanical extrusion and spray-coating, which is suitable for large-scale production. This work endows the interface evaporator with super-hydrophobicity, photo-thermal conversion, anti-icing, and mechanical stability, all of which are highly demanded in multi-scenario solar desalination.
Photothermal superhydrophobic surfaces represent a promising solution for passive anti-icing; however, the persistent high solar absorption of static black coatings often leads to undesirable overheating under non-icing conditions. To address this limitation, we developed a smart superhydrophobic polydimethylsiloxane (PDMS) surface embedded with thermochromic capsules (TC) (S-PDMS/TC) featuring reversible thermochromic capability via a facile combination of spin-coating and femtosecond laser ablation. The resulting hierarchical micro-grid structure acts as a sacrificial layer, shielding fragile nanostructures against mechanical abrasion, while endowing the surface with robust superhydrophobicity (contact angle > 155°). Uniquely, S-PDMS/TC exhibits an adaptive color transition from pale yellow to deep black when the temperature drops below 5 °C. This response enables on-demand photothermal enhancement, significantly boosting solar absorption in freezing environments while minimizing heat absorption at room temperature. Consequently, S-PDMS/TC demonstrates superior anti-icing performance, extending the freezing time to 310 s and reducing ice adhesion strength to 40.4 kPa. Notably, during photothermal de-icing, the meltwater exhibits spontaneous dewetting behavior driven by the replenishment of the air cushion, effectively preventing secondary icing. This work presents a mechanically durable and intelligent strategy for ice protection, successfully balancing efficient de-icing with thermal management.