Junning Li

Prof. Junning Li


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 June 2024 in Measurement Science and Technology
Verified
Journal Article
Closed access
JLJunning Li
Junning Li
WLWenguang Luo
Wenguang Luo
MBMengsha Bai
Mengsha Bai
Rolling bearings are critical components that are prone to faults in the operation of rotating equipment. Therefore, it is of utmost importance to accurately diagnose the state of rolling bearings. This review comprehensively discusses classical algorithms for fault diagnosis of rolling bearings based on vibration signal, focusing on three key aspects: data preprocessing, fault feature extraction, and fault feature identification. The main principles, key features, application difficulties, and suitable occasions for various algorithms are thoroughly examined. Additionally, different fault diagnosis methods are reviewed and compared using the Case Western Reserve University bearing dataset. Based on the current research status in bearing fault diagnosis, future development directions are also anticipated. It is expected that this review will serve as a valuable reference for researchers aiming to enhance their understanding and improve the technology of rolling bearing fault diagnosis.

10 September 2020 in IEEE Access
Verified
Journal Article
Open access
JLJunning Li
Junning Li
WCWuge Chen
Wuge Chen
KHKa Han
Ka Han
QWQian Wang
Qian Wang
To improve the fault identification accuracy of rolling bearings due to the problems of parameter optimization and low convergence accuracy, a novel fault diagnosis method for rolling bearings combining wavelet threshold de-noising, genetic algorithm optimization variational mode decomposition (GA-VMD) and the whale optimization algorithm based on the von Neumann topology optimization least squares support vector machine (VNWOA-LSSVM) is proposed in this manuscript. First, wavelet threshold de-noising is used to preprocess the vibration signal to reduce the noise and improve the signal-to-noise ratio (SNR). Second, a genetic algorithm (GA) is utilized to optimize the parameters of variational mode decomposition (VMD), and optimized VMD is adopted to extract the fault feature information. The VNWOA-LSSVM fault diagnosis model is built to train and identify the fault feature vectors. The proposed method is validated by experimental data. The results show that this method can not only effectively diagnose various damage positions and extents of rolling bearings but also has good identification accuracy.

5 December 2023 in Digital Signal Processing
Verified
Journal Article
Closed access
JLJunning Li
Junning Li
WLWenguang Luo
Wenguang Luo
MBMengsha Bai
Mengsha Bai
MSMaokang Song
Maokang Song

8 September 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJunning Li
Junning Li
JXJiafan Xue
Jiafan Xue
ZMZhitao Ma
Zhitao Ma
Skidding, which frequently occurs in high-speed rolling bearings, has a significant effect on the thermal distribution and service reliability of the bearings. An improved theoretical model of friction power loss distribution in high-speed and light-load rolling bearings (HSLLRBs) considering skidding is established, and the effects of various operating parameters on the friction power loss are investigated. The results show that the friction power loss of the inner ring and outer ring as well as the total friction power loss of the bearing increase as the slip ratio increases, but that the friction power loss of the cage guide surface and roller oil churning show a reverse trend. In addition, the increase in inner ring speed and kinematic viscosity leads to an increase in bearing friction power loss. The steady and transient temperature field distribution of HSLLRBs is obtained by the finite element method (FEM), and the results show that the inner ring raceway has the highest temperature, whereas the cage has the lowest. The temperature distribution test rig of a full-size roller bearing is constructed, and the influence mechanism of the slip ratio, rotation speed, load, lubrication, and surface topography on the bearing temperature distribution are obtained. The experimental results are consistent with the theoretical results, which also validates the theoretical method.

12 March 2014 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
JLJunning Li
Junning Li
WCWei Chen
Wei Chen
YXYoubai Xie
Youbai Xie
A skid damage test rig was developed to simulate the dynamic contact between bearing ring and roller, to reveal the reason why the skid damage of roller bearing sometimes occurs and/or sometimes does not under high-speed and light-load condition at the same slip rate. The mechanism of skid damage to a roller bearing was examined by changing experimental conditions such as the surface topography, slip, inner ring speed, radial load and lubrication. An orthogonal experiment design was used, and the results showed that the slip affected the temperature rise the most followed by the radial load, lubrication and inner ring speed. The relationship between the temperature rise and skid damage was examined; skid damage occurred when the temperature increased rapidly and continually, and non-skid damage occurred when the temperature remained constant or increased very slowly. The temperature varied directly with the inner ring speed. Skid damage is mostly thermal failure where metal-to-metal contact occurs in the contact area of the bearing ring and roller after the oil film is broken; this can result in a sharp temperature rise and material transfer, and the damage can quickly extend to the whole contact area. The preliminary test result showed that the unbalanced loading and muddy oil lubrication are prone to accelerate the damage process and intensify the degree of skid damage.

14 September 2015 in Industrial Lubrication and Tribology
Verified
Journal Article
Closed access
KZKai Zhang
Kai Zhang
QMQingfeng Meng
Qingfeng Meng
WCWei Chen
Wei Chen
JLJunning Li
Junning Li
PHPhil Harper
Phil Harper
Purpose: – This paper aims to measure the oil film thickness between the roller and the inner ring in roller bearings by the ultrasonic method. The oil film thickness between the roller and the inner ring in roller bearings is a key performance indicator of the bearing lubrication condition. As the oil film is very thin and the contact region is very narrow, measurement of this film thickness is very challenging. A promising ultrasonic method was used to measure this film thickness, and this method was expected to overcome some drawbacks in other methods.Design/methodology/approach: – A simplified roller bearing only configured one roller, and an inner ring was built up to investigate this measurement. A miniature piezoelectric element is bonded on the inner surface of the inner ring to measure the reflection coefficient from the layer of oil between the roller and the inner raceway. As the width of the line contact region is smaller than the width of the piezoelectric element, a ray model is used to calibrate the reflection coefficient measured. The quasi-static spring model is then used to calculate oil film thickness from the corrected reflection coefficient data.Findings: – The results measured by this method agree reasonably well with predictions from elastohydrodynamic lubrication (EHL) theory. Also, a dynamic displacement of the rig caused by the skid of the roller versus the inner ring was found under light-load and high-speed conditions.Originality/value: – This work shows that the oil film between the roller and the inner raceway in roller bearings can be measured accurately by ultrasound and shows a deal method when the contact width is smaller than the piezoelectric element width.