This study investigates the effects of inorganic flame retardants, zinc borate, and magnesium hydroxide, on the thermal, morphological, flame retardancy, and mechanical properties of polypropylene (PP)/calcium carbonate composites for potential construction industry applications. Polypropylene/calcium carbonate (50 wt.%) composites containing 5 and 10 wt.% flame retardants were prepared using a batch mixer, followed by compression moulding. The results demonstrated enhanced thermal stability, with the highest char residue reaching 47.2% for polypropylene/calcium carbonate/zinc borate (10 wt.%)/magnesium hydroxide (10 wt.%) composite, a notably strong outcome. Additionally, the composite exhibited an elevated limited oxygen index (LOI) of 29.4%, indicating a synergistic effect between zinc borate and magnesium hydroxide. The proposed flame retardancy mechanism suggests that the flammability performance is driven by the interaction between the flame retardants within the polypropylene/calcium carbonate matrix. Magnesium hydroxide contributes to smoke suppression by releasing water, while zinc borate forms a protective glassy foam that covers the burning surface, promoting char formation and acting as a physical barrier to heat transmission and fire spread. Scanning electron microscopy confirmed good dispersion of the additives alongside calcium carbonate within the polymer matrix. Despite the addition of up to 10 wt.% flame retardants, the composites maintained high-notched impact strength.
Polymer compatibilizer agents are crucial for industrial materials development. Compatibilizer agents may be prepared by melt-grafting in the reactive extrusion process which is cheaper and environmentally friendly. Maleic anhydride-grafted acrylonitrile-butadiene-styrene (ABS-g-MA) has emerged as a relevant compatibilizer agent for immiscible blends, like polycarbonate (PC)/ABS. In this work, ABS-g-MA was prepared by a simple reactive extrusion process using ABS, maleic anhydride (MA) and benzoyl peroxide (BPO). The MA:BPO ratios of 1:0.5 and 1:1 varying the content of MA by 1, 2 and 5 wt% were investigated. The grafting reaction was confirmed through Fourier transform infrared spectroscopy (FT-IR), grafted degree (GD%), thermal and rheological analysis. The effectiveness of the compatibilizer agent was evaluated in PC/ABS blends (70/30 and 85/15 blend ratios). The addition of 5 wt% of ABS-g-MA (5 MA:2.5 BPO) in the PC/ABS blends promoted an expressive reduction of ABS domain sizes and better dispersion in the PC matrix.
26 July 2023 in Journal of Applied Polymer Science
This study explores the development of sustainable fire-resistant composites using a blend of recycled linear low-density polyethylene (rLLDPE) and low-density polyethylene (rLDPE) for construction applications. The incorporation of non-halogenated intumescent flame retardants (IFRs), specifically ammonium polyphosphate (APP) and melamine polyphosphate (MPP), was shown to enhance the flame retardance, thermal stability, and mechanical performance of these recycled polymer blends. IFRs were introduced at 5 wt.% and 10 wt.% concentrations, and their effects were evaluated using limiting oxygen index (LOI) testing and thermogravimetric analysis (TGA). Results showed that 10 wt.% APP and a combination of 5 wt.% APP with 5 wt.% MPP increased LOI values from 18.5% (neat polymer blend) to 21.2% and 22.4%, respectively, demonstrating improved fire resistance. Enhanced char formation, facilitated by IFRs, contributes to superior thermal stability and fire protection. TGA results confirmed higher char yields, with the rLLDPE/rLDPE/MPP5/APP5 composition exhibiting the highest residue (3.00%), indicating a synergistic effect between APP and MPP. Rheological and mechanical analysis showed that APP had more impact on viscoelastic behavior, while the combination of IFRs provided balanced mechanical properties despite a slight reduction in tensile strength. This research highlights the potential of recycled polyethylene composites in promoting circular economy principles by developing sustainable, fire-resistant materials for the construction industry, reducing plastic waste, and enhancing the safety of recycled polymer-based applications.
In the aerospace industry, many composite parts are manufactured by processes using plastic vacuum bags made of polyamide 6 (PA6) as a consumable material. This implies that after demolding the part, this plastic material should be discarded, generating a considerable amount of waste. Tons of vacuum bags are discarded and incinerated per month by several companies in this sector, which highlights the need to recycle and/or reuse this material. PA6/linear low-density polyethylene (LLDPE) blends are of great technological interest because they can combine the excellent thermo-mechanical and oxygen barrier properties of the PA6 with high impact strength, good processability, and low cost of LLDPE. The replacement of neat PA6 by the post-processing vacuum bags residue PA6 may be a new strategy for the recycling of this material. In this work, PA6/LLDPE/maleic anhydride-grafted LLDPE (LLDPE-g-MA) (90/5/5) blends were prepared using a co-rotational twin-screw extruder and the neat PA6 was replaced by different contents of post-processing PA6 (5, 10, 15 and 20 wt.%). The mechanical, thermal, and morphological characterization was evaluated. The increase in the content of post-processing PA6 caused an increase in the crystallinity degree of the LLDPE phase, acting as a nucleating agent to the LLDPE phase, reducing the toughening effect of this phase in the blends and, therefore, providing this phase to act as a reinforcing agent.