Graphite is a well-known anode material for commercial lithium-ion batteries, and its physical and electrochemical properties have been studied extensively. However, the origin of an inductive loop observed in the low-frequency region of the Nyquist complex plane impedance spectrum of the graphite anode has been widely debated and attributed to contrasting reasons. This paper investigates the impedance spectrum of the graphite anode at various states of charge (SoCs) using three-electrode galvanostatic Electrochemical Impedance Spectroscopy (EIS) and further explores the impedance response of the electrolyte as a function of frequency. The graphite anode EIS measurement displayed an inductive loop in the low-frequency region for almost entire SoCs, irrespective of the solid electrolyte interphase (SEI) age. To study the origin of this inductive loop in the graphite impedance spectrum, we fabricated a three-electrode pouch cell with graphite and NMC electrodes and estimated the electrolyte impedance in the frequency range from 1 MHz to 0.05 Hz. The electrolyte impedance at low frequencies exhibited inductive behavior, indicating a significant role of the electrolyte in the origin of the inductive characteristic in the low-frequency region of the graphite EIS spectrum.
Copper-filled vertically aligned carbon nanotubes (Cu@VACNTs) were grown directly on Cu foil substrates of 0.1 mm thicknesses at different temperatures via plasma-enhanced chemical vapor deposition (PECVD). By circumventing the need for additional catalyst layers or intensive substrate treatments, our in-situ technique offers a simplified and potentially scalable route for fabricating Cu@VACNTs with enhanced electrical and thermal properties on thin Cu foils. Comprehensive analysis using field emission scanning microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) mappings, and X-ray diffraction (XRD) revealed uniform Cu filling within the VACNTs across a range of synthesis temperatures (650 °C, 700 °C, and 760 °C). Field emission (FE) measurements of the sample synthesized at 700 °C (S700) showed low turn-on and threshold fields of 2.33 V/m and 3.29 V/m, respectively. The findings demonstrate the viability of thin Cu substrates in creating dense and highly conductive Cu-filled VACNT arrays for advanced electronic and nanoelectronics applications.
6 June 2019 in Journal of Vacuum Science & Technology B
Randomly-oriented carbon nanotubes (CNTs) and vertically-aligned CNTs have been synthesized by a thermal chemical vapor deposition (CVD) process and a plasma enhanced CVD process, respectively, on stainless steel substrates without any external catalyst. Surface topography studies reveal that polishing and chemical etching result in favorable catalytic conditions for nucleation and growth of CNTs. Scanning electron microscopy and transmission electron microscopy observations reveal the growth of CNTs with catalyst particle at the tips. In comparison to randomly-oriented CNTs, vertically-aligned CNTs demonstrate better field emission properties with lower turn-on electric field of ∼2.0 V/μm, lower threshold electric field of ∼3.2 V/μm, and a 2.5-fold increase in the field enhancement factor. The vertical alignment of the emitters benefits the emission process by reducing the screening effect and streamlining the path of ejected electrons directly onto the anode. Vertically-aligned CNTs on conducting substrates are promising emitters in cold cathode vacuum electronics because of their direct contact with the substrate and efficient performance at low operating voltages.