Star observation can be used for the image navigation of certain instruments aboard the three-axis stabilized geostationary satellites. How to extract the accurate star centroids in the observed star images is one of the key problems. In this paper, a high precision star centroid detection method is proposed for the advanced geosynchronous radiation imager (AGRI) of Fengyun-4A (FY-4A), the first experimental satellite of the new generation of Chinese geostationary meteorological satellites FY-4 series. Different from star sensors which are deliberately defocused with relatively large star spot, AGRI is focused for the purpose of earth observation, making it challenging to extract accurate star centroids. To solve the problem, we take the advantage of continuous observing and improve the precision of star centroiding by trajectory fitting and energy response curve fitting. Extensive experiments have been performed on simulated star images and the actual observation data of AGRI aboard FY-4A over ten months in-orbit tests. Experimental results show that the proposed method can accurately extract star centroids with the error less than 0.3 pixels, laying a solid foundation for image navigation of FY-4A.

Nominal grid data of geostationary remote sensing satellites are fundamental for generating the subsequent products. It can be obtained by normalized projection models, mainly based on the imaging mode. However, there are only definitions and primary descriptive equations for the normalized geostationary projection (NGP) model in the existing literature, while the corresponding imaging mode and the physical interpretation are missing, thus hindering the understanding of the produced nominal grid dataset as well as the subsequent products based on the grid. This paper first derived the imaging mode for NGP based on the limited literature. In addition, another new imaging mode was introduced and analyzed based on NGP. The corresponding projection model [nonstandard normalized geostationary projection (NNGP)] was proposed, which is entirely consistent with the situation of America’s Geostationary Operational Environmental Satellite-R Series (GOES-R) and Chinese Fengyun-4A (FY-4A). Furthermore, this paper proposed a novel nominal projection model for frame imaging, which is consistent with the imaging mode of China’s Gaofen-4. Finally, extensive experiments were designed to comparatively analyze the three nominal grids and demonstrate a detailed difference. By providing a theoretical basis for nominal grid selection, this research is highly significant for the efficient near-real-time production and further applications of geostationary images, as well as the conversion between different datasets resulting from different nominal grid data. In addition, our models are sufficiently tested during the on-orbit running of FY-4A, the first satellite of China’s second-generation three-axis stabilized geostationary meteorological satellite series. The algorithms provide the technical support for the high-precision image navigation and registration and play a significant role in robustly producing the meteorological data with similar quality to those from GOES-R.

Known as input in the numerical weather prediction (NWP) models, microwave radiation imager (MWRI) data have been widely distributed to the user community. Nevertheless, the current operational geolocation accuracy is still on the pixel scale due to the presence of geolocation uncertainty. In this letter, we propose a new method to estimate the geolocation errors in MWRI data. Compared to the traditional coastline inflection method (CIM), the proposed method has two innovations. First, we establish a surface fitting interpolation model by involving more observations to detect the coastline. Second, we employ the iterative closest point (ICP) algorithm to determine the correspondences between the detected coastline and the actual coastline. Simulated experimental results demonstrate that the proposed method can provide a more accurate geolocation error estimation than the CIM. By applying our method, we have processed an MWRI data set from January 1 to February 28 in 2016. The experimental results have shown that the operational FY-3C MWRI geolocation errors are 0.4813 and 0.4909 pixels in the along-track and cross-track directions, respectively, which can be significantly reduced to 0.1299 and 0.1497 pixels after the attitude correction. It means that the geolocation accuracy has an average improvement up to 70%.

The microwave radiation imager (MWRI) located onboard the FengYun-3C (FY-3C) satellite provides a considerable amount of critical information for numerical weather predictions. Obtaining accurate geolocation results from the FY-3C MWRI data is of great importance. In this letter, we improve the traditional coastline inflection method (CIM) and propose an ℓ₀ sparse approximation model for geolocation error estimation and correction. Specifically, we propose using the jump point of the step function to estimate the true coastline point. This approach can characterize the geolocation errors more accurately than the CIM, which further improves the geolocation accuracy. In the theoretical part, we provide a complete solution to obtain the step function through an iterative blind deconvolution. For a practical use, we demonstrate the effectiveness of the proposed method for geolocation error estimation through quantitative results obtained on the FY-3C MWRI data. The experimental results show that the proposed method can achieve an improvement of up to 33.33% in the standard deviation of geolocation errors (approximately 0.00030) compared to the traditional CIM (approximately 0.00045). Furthermore, we also apply the proposed method to the FY-3C satellite and improve the geolocation accuracy of the MWRI data through geolocation error correction.

Due to the limitation of the satellite attitude measurement accuracy and the system servo control error of the payload scanning mechanism, an optimal use of Micro-Wave Radiation Imager (MWRI) observations requires high geolocation accuracy. In the operational system, the MWRI geolocation accuracy reaches 1 pixel, and there still exists room for improvement. In this article, we improve upon the coastline inflection point method (CIM) and propose to assign the accurate correspondence by employing a nonrigid point set registration method. First, the method identifies a set of latent variables to recognize outliers and then applies nonparametric geometric constraints to the correspondence as a priori distribution. Second, the maximum a posteriori (MAP) estimation is applied by the expectation–maximization (EM) algorithm to obtain correct inliers. The comparison with other methods demonstrates that the proposed method can provide more accurate estimation of geolocation bias. In addition, the pixel error and changes in spacecraft attitude with the long-term geolocation data in FY-3C MWRI before and after correction were analyzed during the period from April 1 to August 30, 2018. The results have shown that the geolocation errors are reduced from [0.50, 0.60] pixels to [0.20, 0.33] pixels in the along- and cross-track directions after the attitude correction. In addition, the reduction of the standard deviation shows that the geolocation quality of MWRI is improved.

Passive microwave (PMW) sensors are popularly applied to Earth observations. However, the satellite PMW radiometer data sometimes have non-negligible errors in geolocation. Coastline inflection methods (CIMs) are widely used to improve geolocation errors of PMW images. However, they commonly require accuracy satellite flight parameters, which are difficult to obtain by users. In this study, a simplified coastline inflection method (SCIM) is proposed to correct the geolocation errors without demanding for the satellite flight parameters. SCIM is applied to improve geolocation errors of FengYun-3D (FY-3D) Microwave Radiation Imager (MWRI) brightness temperature images from 2018 and 2019. It reduces the geolocation errors of MWRI images to 0.15 pixels in the along-track and cross-track direction. This means reductions of 75% and 86% of the geolocation errors, respectively. The mean brightness temperature differences between the ascending and descending MWRI images are reduced by 34%, demonstrating the improved geolocation accuracy of SCIM. The corrected images are also used to estimate Arctic sea ice concentration (SIC). By comparing with SICs retrieved from the un-corrected images, the root mean square error (RMSE) and mean absolute error (MAE) of the SICs from the corrected images are reduced from 13.7% to 10.2% and 8.9% to 6.9%, respectively. The mean correlation coefficient (R) increases from 0.91 to 0.95. All these results indicate that SCIM can reduce geolocation errors of satellite-based PMW images significantly. As SCIM is very simple and easy to be applied, it could be a useful method for users of PMW images.