Photoelectrochemical devices integrate the processes of light absorption, charge separation, and catalysis for chemical synthesis. The monolithic design is interesting for space applications, where weight and volume constraints predominate. Hindered gas bubble desorption and the lack of macroconvection processes in reduced gravitation, however, limit its application in space. Physico‐chemical modifications of the electrode surface are required to induce gas bubble desorption and ensure continuous device operation. A detailed investigation of the electrocatalyst nanostructure design for light‐assisted hydrogen production in microgravity environment is described. p‐InP coated with a rhodium (Rh) electrocatalyst layer fabricated by shadow nanosphere lithography is used as a model device. Rh is deposited via physical vapor deposition (PVD) or photoelectrodeposition through a mask of polystyrene (PS) particles. It is observed that the PS sphere size and electrocatalyst deposition technique alter the electrode surface wettability significantly, controlling hydrogen gas bubble detachment and photocurrent–voltage characteristics. The highest, most stable current density of 37.8 mA cm−2 is achieved by depositing Rh via PVD through 784 nm sized PS particles. The increased hydrophilicity of the photoelectrode results in small gas bubble contact angles and weak frictional forces at the solid–gas interface which cause enhanced gas bubble detachment and enhanced device efficiency.
9 May 2018 in Journal of the American Chemical Society
A reciprocal replication system is constructed from four building blocks, A, B, C, and D, which react in a pairwise manner through either a 1,3-dipolar cycloaddition or the condensation reaction between an amine and an aldehyde to create two templates, trans-TAB and TCD. These templates are equipped with complementary recognition sites—two carboxylic acids (trans-TAB) or two 4,6-dimethylamidopyridines (TCD)—that enable each template to direct the formation of its complementary partner through two mutually-reinforcing crosscatalytic pathways, in which the templates trans-TAB or TCD preorganize the appropriate building blocks within two catalytically-active ternary complexes: [C•D•trans TAB] and [A•B•TCD]. The template-directed processes within these complexes generate a heteroduplex [trans-TAB•TCD], which is shown to possess significant stability through kinetic simulation and fitting. As a consequence, the individual crosscatalytic pathways perform more efficiently in template-directed experiments when the concentration of the template being formed is below that of the template added as instruction. Comprehensive analysis of the system when A, B, C, and D are mixed together directly, using a series of 1H NMR spectroscopic kinetic experiments, demonstrates that the behavior of the reciprocal system is more than the simple sum of its parts—as part of the interconnected network, the product of each reaction clearly directs the fabrication of its reciprocal partner, facilitating both higher rates of formation for both templates and improved diastereoselectivity for trans-TAB. A simple change in experimental conditions (from dry to ‘wet’ CDCl3) demonstrates the sensitivity of the replication pathways within the network to the reaction environment, which leads to a >10-fold increase in the contribution of a new minimal self-replicator, trans-TAB*, to the replication network.
A new series of chiral 4,5-dihydro-1H-[1,2,4]-triazoline molecules, featuring a β-ᴅ-glucopyranoside appendage, were synthesized via a 1,3-dipolar cycloaddition reaction between various hydrazonyl chlorides and carbohydrate Schiff bases. The isolated enantiopure triazolines (8a–j) were identified through high-resolution mass spectrometry (HRMS) and vibrational spectroscopy. Subsequently, their solution structures were elucidated through NMR spectroscopic techniques. Single-crystal X-ray analysis of derivative 8b provided definitive evidence for the 3-D structure of this compound and revealed important intermolecular forces in the crystal lattice. Moreover, it confirmed the (S)-configuration at the newly generated stereo-center. Selected target compounds were investigated for anti-tumor activity in 60 cancer cell lines, with derivative 8c showing the highest potency, particularly against leukemia. Additionally, substituent-dependent anti-fungal and anti-bacterial behavior was observed.
23 August 2019 in Acta Crystallographica Section E Crystallographic Communications
The title compound, C7H4F3NO2, 3-trifluoromethyl-1H-pyrrolo[1,2-c]oxazol-1-one, is the first crystal structure of the pyrrolo[1,2-c]oxazole ring system: the fused ring system is almost planar (r.m.s. deviation = 0.006 Å). In the crystal, weak C—H...O and C—H...F hydrogen bonds link the molecules into [001] chains and π–π stacking interactions consolidate the structure.
21 March 2023 in Acta Crystallographica Section E Crystallographic Communications
The title compound, 2,2′:4,4′′:4′,4′′′-quaterpyridine (Qtpy), C20H14N4, crystallizes in the triclinic P\overline{1} space group and has half of the molecule in the asymmetric unit, corresponding to 4,4′-bipyridine (4,4′-bpy) that serves as the building block for the molecule. C4,4′-bpy—N—C4,4′-bpy and/or N—C4,4′-bpy—C4,4′-bpy bond-angle parameters show that the 4,4′-bpy ligands are highly rigid, displaying values lower than the linear bond angle of 180°. In the crystal, the 4,4′-bpy units are seen to be facing each other in relatively close proximity. The most important interactions on the Hirshfeld Surface of the compound are C—H...N/H...N—C interactions (constituting 10.6% and 7.6% of the total surface).