Tunable terahertz absorbers composed of periodically cross-shaped graphene arrays with the ability to achieve near-unity absorbance are proposed and studied. Our results demonstrate that the bandwidth of absorption rate above 90% can reach up to 1.13 terahertz by use of a single layer of cross-shaped graphene arrays. By simply stacking the double layer cross-shaped graphene with careful design, the working bandwidth can be broadened compared with the single-layer graphene-based absorber. The proposed absorbers have the properties of being polarization insensitive and having large angle tolerance, and the tunability of the Fermi level in graphene allows us to realize tunable terahertz absorbers with potential interest in integrated terahertz optoelectronic devices.
The infrared absorption spectrum due to structural vibrations in molecules has been widely used to resolve chemical identification. However, this method is limited by the weak molecule-light interaction. Graphene plasmon, having strong confinement and large field enhancement, provides a promising way to increase their interactions. Here we propose tunable hybridization-induced graphene nanostructures for sensing application. Our results reveal that when the symmetry of the graphene disk is broken by introducing a small circular defect, dual-band resonance can be excited at mid-infrared frequencies. The dual-band resonance peaks are produced by plasmon hybridization effect between two simple structures: graphene disks and circular defects. We investigate the influence of the size and position of the circular defect on the dual-band resonance peaks. We further explore the dual-band resonance peaks for sensing, and the sensitivity can reach 550 cm−1/RIU and the FOM can reach 20.4. Compared to the original graphene disk structure, the results show stronger resonance intensity and higher frequency sensitivity. Our findings provide a new platform for sensing, and moreover the dual-band resonance structure feature enables us to promote the development of multi-substance detection.
Reducing radiative losses for a high quality factor resonance based on the concept of nonradiative states including anapole mode and bound states in the continuum mode has been attracting extensive attention. However, a high quality factor resonance is obtained at the expense of its modulation depth. Here, an asymmetric metasurfaces structure consisted of silicon double D-shaped resonator arrays that can support both an anapole mode and two bound states in the continuum modes in terahertz band is proposed, which has not only ultrahigh quality factor but also near-unity modulation depth. A resonance derived from anapole mode with stronger electromagnetic field enhancement and higher quality factor can be achieved by increasing the gap of resonator. Meanwhile, two Fano resonances governed by bound states in the continuum modes can be identified, and their quality factors can be easily tailored by controlling the asymmetry of resonator. Such an all-dielectric metasurfaces structure may give access to the development of the terahertz sensors, filters, and modulators.
We propose a difunctional tunable broadband absorber/reflector consisting of a periodic cross-shaped graphene array and a vanadium dioxide ( ) layer. When reflects the properties of metal, the proposed dual-function device is used as a reflector; when reflects the nature of the dielectric, the difunctional device will be used as an absorber. The simulation results indicate that more than 90% absorption bandwidth can be available in the absorber in the frequency range of 56.1–59.0 THz, up to 100%. Moreover, over 80% absorption can be achieved over the frequency range of 88.5 to 90.2 THz. In addition, the bandwidth and absorption of the metamaterial absorber can be dynamically changed because of the Fermi energy level in graphene and the temperature tunability of . The proposed device can be applied to manufacturing infrared spectrophotometers, on-dispersive infrared photometers, and Fourier transform infrared spectrometers. Therefore, it has potential application in the field of environmental monitoring.
31 August 2025 in Optics and Lasers in Engineering