Jurij Delihowski

Mr. Jurij Delihowski

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JDJurij Delihowski
Jurij Delihowski
PIPiotr Izak
Piotr Izak
ŁWŁukasz Wojcik
Łukasz Wojcik
Agata StempkowskaAgata Stempkowska
Agata Stempkowska
MJMarcin Jarosz
Marcin Jarosz
This study examines the influence of different grain size fractions of coal fly ash on the properties of clay-cement mortars used in flood levee construction. Dry aerodynamic separation and mesh sieving were used to obtain ultrafine, fine, and medium fractions of high-calcium and silica fly ash. The experimental results reveal that the rheological properties of fresh mortars are significantly influenced by these fractions. High-calcium fly ash mortars exhibit high reactivity and rapid increase in viscosity, with finer fractions showing the highest reactivity. Silica ashes show increased reactivity in the later stages of suspension hardening. Their spherical shape contributes to reducing internal friction during flow in initial technological operations. Furthermore, the compressive strength of hardened mortars improves as the particle size decreases for both ashes, resulting in a dense and uniform microstructure. The separation and fractionation of fly ashes contribute to the obtaining of fractions that influence the parameters of clay-cement suspension application on different scales. The results show the potential benefits of ash separation, which can bring advantages in terms of economic viability, engineering performance, and ecological sustainability.

9 January 2026 in Crystals
Verified
Journal Article
Open access
PDF file
DKDawid Dariusz Kozień
Dawid Dariusz Kozień
KMKrzysztof Malata
Krzysztof Malata
ZKZuzanna Krysińska
Zuzanna Krysińska
KMKrystian Misieńko
Krystian Misieńko
JDJurij Delihowski
Jurij Delihowski
Zbigniew PędzichZbigniew Pędzich
Zbigniew Pędzich
This study investigated the fabrication and characterization of polylactic acid (PLA)-based ceramic composite filaments for fused deposition modeling (FDM) 3D printing. Boron carbide (B4C) and silicon carbide (SiC) were incorporated into PLA at various weight fractions (1–40 wt. % for B4C and 1–20 wt. % for SiC) to produce composite filaments using a commercial extruder. The rheological properties, thermal stability, and printability of the filaments were evaluated. Filaments with low ceramic content exhibited satisfactory quality, whereas those with higher loadings required reprocessing to improve their dimensional stability and surface morphology. Successful printing was achieved with SiC contents of up to 8 wt. % using single-extruded filaments and up to 20 wt. % using double-extruded filaments. Rheological tests revealed that filaments with low ceramic content exhibited shear-thinning behavior, whereas those with higher loadings displayed nearly Newtonian-like behavior. Thermal analysis using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) determined the optimal processing temperature range for the composite filaments to be between 200 °C and 270 °C. High-temperature microscopy was used to study the temperature behavior of the B4C-containing filaments and set the optimum printing temperature. The results demonstrate the feasibility of producing PLA-based ceramic composite filaments for FDM 3D printing with the potential to tailor the thermal and functional properties of the printed parts for specific applications.

3 October 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
JDJurij Delihowski
Jurij Delihowski
PIPiotr Izak
Piotr Izak
ŁWŁukasz Wójcik
Łukasz Wójcik
MGMarcin Gajek
Marcin Gajek
DKDawid Kozień
Dawid Kozień
MJMarcin Jarosz
Marcin Jarosz
The properties of coal fly ash vary significantly depending on factors such as coal type, combustion conditions, and flue gas emission reduction methods. This study investigates the influence of particle size fractionation on the chemical composition, mineralogical structure, and thermal behaviour of two types of fly ash: high calcium ash derived from lignite (S1) and silica-rich ash from bituminous coal (S2). Dry aerodynamic separation was used to obtain distinct size fractions, which were then subjected to a comprehensive characterisation including X-ray fluorescence, X-ray diffraction, scanning electron microscopy, and thermal analysis. The results reveal notable differences between the S1 and S2 ashes and between their size fractions. The finer fractions (< 20 μm) of S1 showed an increased calcium and sulphur content, while the coarser fractions (> 100 μm) contained more silica and alumina. The S2 ash exhibited a higher overall silica content, with alkali metals concentrated in finer fractions. Thermal analysis demonstrated distinct behaviours for each type and fraction of ash. Fine fractions of S1 ash showed SO2 emission at elevated temperatures, while S2 ash exhibited greater CO2 gas emission. After thermal treatment, the recrystallisation of the glassy phase was observed for S1, while the S2 ashes were more prone to melting and agglomeration. The study highlights the potential for the customised utilisation of specific ash fractions in various applications, such as geopolymer synthesis, adsorbent materials, and refractory products. This comprehensive characterisation contributes to a better understanding of fly ash properties and their dependence on particle size, providing valuable insights to optimise fly ash utilisation in various industries. The findings suggest strategies for a more efficient use of fly ash resources, particularly relevant in the context of decreasing fly ash availability due to the phase-out of coal power plants.

22 January 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JDJurij Delihowski
Jurij Delihowski
PIPiotr Izak
Piotr Izak
This study investigates the rheological behaviour of clay–cement sealing suspensions modified with dry size-fractionated coal fly ashes of contrasting chemical composition. High-calcium S1 ashes and siliceous S2 ashes were separated into ultrafine (< 10 μm), fine (5–20 μm), and middle (20–100 μm) fractions to isolate size-dependent reactivity. Rotational and oscillatory rheometry demonstrate that Ca-rich fractions induce rapid structuration: at 20wt% ash addition, the Bingham yield stress rises from ~ 20–30 Pa in reference suspensions to > 150 Pa, and exceeds 400 Pa at 30wt% S1 loading, accompanied by steep increases in storage modulus (G′ up to 10⁷–10⁸Pa for ultrafine fractions). In contrast, S2 ashes disperse the clay–cement network, lowering yield stress to ~ 15–60 Pa even at 40 wt% replacement and maintaining moderate viscoelastic stiffness (G′~10⁴–10⁵Pa). Particle fineness amplifies these trends: S1.UF promotes early hydration products precipitation and slip-layer formation, whereas S2.UF preserves fluidity. Sodium-silicate activation introduces a distinct threshold—at 1.0–1.5wt% Na₂SiO₃ the S1 systems undergo a sol–gel transition, with τ₀ surging above 200 Pa, while S2 systems respond gradually. These results quantitatively shows how ash chemistry and granulometry govern early yield stress, viscosity, and G′/G″ ratios, and identify composition windows for either rapid sealing (Ca-rich, fine fractions) or long-distance pumpability (Si-rich, fine fractions). The work demonstrates that fractionated fly ash provides an effective design tool for tailoring rheology of low-cement, sustainable sealing slurries for hydraulic and geotechnical applications.

12 July 2024 in Materials
Verified
Journal Article
Open access
PDF file
JDJurij Delihowski
Jurij Delihowski
MGMarcin Gajek
Marcin Gajek
Piotr IzakPiotr Izak
Piotr Izak
MJMarcin Jarosz
Marcin Jarosz
Coal fly ash (CFA), a by-product of coal combustion, is a valuable raw material for various applications. However, the heterogeneous nature of the composition and properties of CFA provides challenges to its effective usage and utilisation. This study investigates the thermal behaviour of the fly ashes of lignite (FA1) and brown coal (FA2) and their fractions obtained by dry aerodynamic separation. Thermal analysis techniques, including thermogravimetry (TG), differential scanning calorimetry (DSC), and evolved gas analysis (EGA), were used to characterise the behaviour of the fly ash fractions while heating up to 1250 °C. The results reveal distinct differences in the thermal behaviour between ash types and among their different size fractions. For the FA1 ashes, the concentration of calcium-rich compounds and the level of recrystallisation at 950 °C increased with the decrease in particle size. The most abundant detected newly formed minerals were anhydrite, gehlenite, and anorthite, while coarser fractions were rich in quartz and mullite. For the FA2 ashes, the temperature of the onset of melting and agglomeration decreased with decreasing particle size and was already observed at 995 °C. Coarser fractions mostly remain unchanged, with a slight increase in quartz, mullite, and hematite content. Recrystallisation takes place in less extension compared to the FA1 ashes. The findings demonstrate that the aerodynamic separation of fly ashes into different size fractions can produce materials with varied thermal properties and reactivity, which can be used for specific applications. This study highlights the importance of thermal analysis in characterising fly ash properties and understanding their potential for utilisation in various applications involving thermal treatment or exposure to high-temperature conditions. Further research on advanced separation techniques and the in-depth characterisation of fly ash fractions is necessary to obtain materials with desired thermal properties and identify their most beneficial applications.

3 April 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Piotr IzakPiotr Izak
Piotr Izak
JDJurij Delihowski
Jurij Delihowski
JMJoanna Mastalska-Popławska
Joanna Mastalska-Popławska
Agata StempkowskaAgata Stempkowska
Agata Stempkowska
This study proposes the utilisation of mining wastes, TG3 clay (Turoszów mining gangue) and post-flotation sludge (KGHM-Gilów), stored at a distance of about 150 km from each other in the region of Lower Silesia, Poland. From these wastes, mixtures were prepared for the production of ceramic tiles. Depending on the mutual proportions of the wastes, it is possible to obtain sintered stoneware-type ceramics with a mechanical bending strength of about 40 MPa and porous faience-type ceramics with a strength above 15 MPa. It is shown that the significant utilisation of these wastes is possible. The ceramic tiles were classified according to the applicable PN-EN 14411:2016 standard.