Avinash Borgaonkar

Dr. Avinash Borgaonkar

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ABAvinash Borgaonkar
Avinash Borgaonkar
GMGreg McNamara
Greg McNamara
In the present study, the life cycle assessment (LCA) of uncoated steel and alkyd-coated steel (using the sol–gel method) systems subjected to the marine atmosphere is performed to examine their environmental impacts. The LCA findings demonstrate a notable 46% reduction in the overall environmental impact of the coated system compared to the uncoated system. The findings of the sensitivity analysis indicate that a decreased mean time between repair and maintenance, along with an augmented quantity of coating, results in adverse environmental consequences. Furthermore, the LCA outcomes highlight the significant environmental impacts associated with 3-glycidyloxypropyltrimethoxysilane and n-propanol within the coated system. Hence, there is a need for the development of commercial coatings with bio-based products to develop a greener solution.

12 October 2024 in Coatings
Verified
Journal Article
Open access
PDF file
ABAvinash Borgaonkar
Avinash Borgaonkar
GMGreg McNamara
Greg McNamara
Superhydrophobic coatings have great potential to mitigate ice accumulation and ice adhesion issues due to their outstanding water-repellent and self-cleaning characteristics. In the present study, polyurethane elastomer (PUE) is considered a superhydrophobic coating material for anti-icing applications. The life cycle assessment (LCA) of bare aluminum and PUE-coated systems is performed using the Centrum voor Milieukunde Leiden methodology. The cradle-to-gate LCA scope is implemented to evaluate and compare the total environmental impact. This study revealed that the PUE-coated system exhibited a significant reduction in total environmental impact compared to bare aluminum. The levelized cost of coating analysis demonstrates that the PUE coating system is more economical than bare aluminum surfaces. There is scope to reduce the environmental impact associated with PUE-coated systems using bio-based and less toxic chemicals/solvents.

2 February 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
ABAvinash Borgaonkar
Avinash Borgaonkar
SISyed Ismail
Syed Ismail
Solid lubricants have been popularly used in tribological applications by virtue of their excellent lubricating properties in extreme environmental conditions. The tribological performance of such lubricated surfaces can be significantly enhanced by optimization of the coating material properties. In the present study, the composite MoS2-TiO2 coating is fabricated and studied the different parameters affecting the tribological behavior of the developed coating using design of experiment Techniques such as Taguchi and artificial neural network (ANN) approach. The optimization study was performed by considering the various input parameters such as addition of wt.% of TiO2 into the MoS2 base matrix, contact pressure, sliding speed, and pin surface temperature which affects the coating’s material tribological properties. The Taguchi approach reveals that pin surface temperature has the highest influence, followed by contact pressure, and wt.% addition of TiO2. The responses predicted using both Taguchi and ANN were compared and it has been observed that ANN helps to predict the responses more accurately compared to the Taguchi approach.

10 July 2023 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
ABAvinash Borgaonkar
Avinash Borgaonkar
ISIsmail Syed
Ismail Syed
Machining is one of the basic and inevitable operations in the manufacturing industry. The machining performance is estimated based on various parameters like cutting forces, surface roughness, tool–chip interface temperature, and specific energy. In the traditional approach, cutting fluids are greatly utilized to dissipate the generated heat during machining, but their utilization causes a threat to nature and human being’s health. Therefore, there emerges a necessity to determine user-friendly, sustainable, and eco-friendly substitutes for traditional cutting fluids. The field of advanced tribology has proposed the usage of solid lubricants due to their inherent properties, such as excellent tribological performance, reduced machining zone temperature due to lowered friction, and enhanced tool life. Therefore, in the present study, pure MoS2 and composite MoS2–TiO2 solid lubricants have been employed in the milling process of AISI 52100 steel with HSS end mill cutter. The machining was carried out in different conditions such as uncoated tool without use of lubricant, uncoated tool with use of lubricant, coated tool without use of lubricant, and coated tool with use of lubricant that were employed to analyze their effect on machining performance. The experimental results showed substantial improvement regarding reduced cutting forces, reduced temperature at tool–chip interface, improved surface finish, and average tool wear with the application of solid lubricants. Among the various lubricating conditions, composite MoS2–TiO2-coated tool with composite MoS2–TiO2 lubricant exhibits excellent machining performance.

29 February 2024 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
ABAvinash Borgaonkar
Avinash Borgaonkar
ISIsmail Syed
Ismail Syed

23 December 2019 in Materials Today: Proceedings
Verified
Journal Article
Closed access
ABAvinash Borgaonkar
Avinash Borgaonkar
MMM.B. Mandale
M.B. Mandale
VSV.G. Salunkhe
V.G. Salunkhe
SPS.B. Potdar
S.B. Potdar