Platinum nanocatalysts play critical roles in CO oxidation, an important catalytic conversion process. As the catalyst size decreases, the influence of the support material on catalysis increases which can alter the chemical states of Pt atoms in contact with the support. Herein, we demonstrate that under-coordinated Pt atoms at the edges of the first cluster layer are rendered cationic by direct contact with the Al₂O₃ support, which affects the overall CO oxidation activity. The ratio of neutral to cationic Pt atoms in the Pt nanocluster is strongly correlated with the CO oxidation activity, but no correlation exists with the total surface area of surface-exposed Pt atoms. The low oxygen affinity of cationic Pt atoms explains this counterintuitive result. Using this relationship and our modified bond-additivity method, which only requires the catalyst–support bond energy as input, we successfully predict the CO oxidation activities of various sized Pt clusters on TiO₂.

Scanning tunneling microscope observations show a geometrical transition from a planar structure to a 3D structure at n = 8. This geometrical transition resulted in a significant decrease in the activation energy of the CO oxidation reaction. The upper-layer Pt atoms of the 3D cluster structure that starts to form at n = 8 are low-coordinated Pt atoms, and they may play an important role in the CO oxidation reaction.

Catalytic CO oxidation is unveiled on size-selected Pt₁₀ clusters deposited on two very different ultrathin (≈0.5–0.7 nm thick) alumina films: (i) a highly ordered alumina obtained under ultra-high vacuum (UHV) by oxidation of the NiAl(110) surface and (ii) amorphous alumina obtained by atomic layer deposition (ALD) on a silicon chip that is a close model of real-world supports. Notably, when exposed to realistic reaction conditions, the Pt₁₀/UHV-alumina system undergoes a morphological transition in both the clusters and the substrate, and becomes closely akin to Pt₁₀/ALD-alumina, thus reconciling UHV-type surface-science and real-world experiments. The Pt₁₀ clusters, thoroughly characterized via combined experimental techniques and theoretical analysis, exhibit among the highest CO oxidation activity per Pt atom reported for CO oxidation catalysts, due to the interplay of ultra-small size and support effects. A coherent interdisciplinary picture then emerges for this catalytic system.

We formed an epitaxial film of CeO2(111) by sublimating Ce atoms on Ru(0001) surface kept at elevated temperature in an oxygen ambient. X-ray photoemission spectroscopy measurement revealed a decrease of Ce4+/Ce3+ ratio in a small temperature window of the growth temperature between 1070 and 1096 K, which corresponds to the reduction of the CeO2(111). Scanning tunneling microscope image showed that a film with a wide terrace and a sharp step edge was obtained when the film was grown at the temperatures close to the reduction temperature, and the terrace width observed on the sample grown at 1060 K was more than twice of that grown at 1040 K. On the surface grown above the reduction temperature, the surface with a wide terrace and a sharp step was confirmed, but small dots were also seen in the terrace part, which are considerably Ce atoms adsorbed at the oxygen vacancies on the reduced surface. This experiment demonstrated that it is required to use the substrate temperature close to the reduction temperature to obtain CeO2(111) with wide terrace width and sharp step edges.