This paper gives a historical review of the theories that have been developed for the analysis of multilayered structures. Attention has been restricted to the so-called Zig-Zag theories, which describe a piecewise continuous displacement field in the plate thickness direction and fulfill interlaminar continuity of transverse stresses at each layer interface. Basically, plate and shell geometries are addressed, even though beams are also considered in some cases. Models in which the number of displacement variables is kept independent of the number of constitutive layers are discussed to the greatest extent. Attention has been restricted to those plate and shell theories which are based on the so-called method of hypotheses or axiomatic approach in which assumptions are introduced for displacements and/or transverse stresses. Mostly, the work published in the English language is reviewed. However, an account of a few articles originally written in Russian is also given. The historical review conducted has led to the following main conclusions. 1) Lekhnitskii (1935) was the first to propose a Zig-Zag theory, which was obtained by solving an elasticity problem involving a layered beam. 2) Two other different and independent Zig-Zag theories have been singled out. One was developed by Ambartsumian (1958), who extended the well-known Reissner-Mindlin theory to layered, anisotropic plates and shells; the other approach was introduced by Reissner (1984), who proposed a variational theorem that permits both displacements and transverse stress assumptions. 3) On the basis of historical considerations, which are detailed in the paper, it is proposed to refer to these three theories by using the following three names: Lekhnitskii Multilayered Theory, (LMT), Ambartsumian Multilayered Theory (AMT), and Reissner Multilayered Theory (RMT). As far as subsequent contributions to these three theories are concerned, it can be remarked that: 4) LMT although very promising, has almost been ignored in the open literature. 5) Dozens of papers have instead been presented which consist of direct applications or particular cases of the original AMT. The contents of the original works have very often been ignored, not recognized, or not mentioned in the large number of articles that were published in journals written in the English language. Such historical unfairness is detailed in Section 3.2. 6) RMT seems to be the most natural and powerful method to analyze multilayered structures. Compared to other theories, the RMT approach has allowed from the beginning development of models which retain the fundamental effect related to transverse normal stresses and strains. This review article cites 138 references.

This review article is devoted to the use of the Reissner Mixed Variational Theorem (RMVT) forward two-dimensional modeling of flat and curved, multilayer structures. A thorough review of the literature involving the use in the modeling of multilayered plates and shells using RMVT is also presented. In the first part, the paper overviews relevant key points that should be taken into account for an accurate description of strain and stress fields in multilayered plate and shell analysis. It is then shown that RMVT has been originated in view of the fulfillment of such key points, herein referred to as C0-Requirements (zig-zag form of the displacement fields in the thickness direction and continuity of transverse normal and shear stresses at each layer interface). Classical variational statements are used to introduce Reissner’s Theorem. In the second part, the paper presents various ways in which RMVT can be used to develop plate and shell theories in a systematic manner. The so called layer-wise and equivalent single layer variable description are considered. Both strong and weak (finite element) forms of governing equations have been derived. A Weak Form of Hooke’s Law (WFHL), is also discussed as an idea to eliminate transverse stress variables leading to standard classical models with only displacement unknowns. Two appendices display details of governing equations related to multilayered doubly curved shells and to finite element matrices of multilayered plates. A third part reviews the works that have appeared in literature which make use of RMVT. Mainly papers on multilayered plate and shell modelings have been addressed. The final part of the paper is devoted to giving an overview with selected results of numerical performance that can be acquired by RMVT applications; extensive comparison to elasticity solutions and to other significant analyses, based on classical and refined approaches, are given. It is concluded that Reissner’s Mixed Theorem should be considered as a natural tool for multilayered structure analyses; it plays a similar role to that of the Principle of Virtual Displacement in the analysis of isotropic single-layer structures. This review article includes 119 references.