This paper focuses on solving state estimation problems of nonlinear systems whose states evolve on matrix Lie groups and measurements live in the Euclidean space under non-Gaussian measurement noise. Building upon the maximum correntropy criterion and the invariant Kalman filtering theory, a generalized robust extended Kalman filtering algorithm on matrix Lie groups is derived from maximizing a novel optimization cost function. This cost function is introduced by considering the correntropy and the system geometry structure. Then, two alternative versions of the proposed filtering algorithm are provided according to the distinct processing approaches of the nonlinear measurement function in the cost function. A Gaussian-Newton method on Lie groups and a fixed-point iterative method are applied to update the posterior estimation. In addition, sufficient conditions are given to ensure the convergence of fixed-point iterative steps. Extensive Monte-Carlo simulations on an INS/GPS integrated navigation system and experiments on open-source datasets validate the theoretical analysis and illustrate the effectiveness and robustness of the proposed filter.
28 November 2018 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
This paper presents a hybrid attitude control scheme of L1 adaptive and dynamic inversion for unmanned aerial vehicle with actuator faults, where both gain fault and bias fault are considered. Firstly, dynamic inversion is employed to track attitude angles in the outer loop and ensures the rapid response. Secondly, an L1 adaptive controller for the inner loop is established to compensate for system uncertainty and uncertainty caused by actuator failures. Thirdly, the analysis of steady-state and transient performance is given by Lyapunov theory. Finally, simulation results prove the effectiveness of the proposed approach.
9 February 2022 in Transactions of the Institute of Measurement and Control
This paper develops a L1 adaptive output-feedback fault-tolerant controller for uncertain nonlinear systems in the presence of unmodeled actuator dynamics and actuator faults. The proposed controller consists of the output predictor, adaptive laws, and the control law. The output predictor is a dynamic system expressed as a linear system with adaptive parameters which mean the matched uncertainties and the unmatched uncertainties. Piecewise-constant adaptive laws are designed to update the adaptive parameters so that the estimation error is driven to zero at each integration time step. The control law with low-pass filters is introduced to compensate for the performance degradation because of system uncertainties, unmodeled actuator dynamics and faults, and to guarantee the uniform boundedness of the input and output signals of the system. Two simulation examples verify the effectiveness of the proposed controller.
This paper investigates an L1 adaptive fault-tolerant control scheme for nonlinear systems with input constraint, external disturbances, and multiple faults, which include actuator faults and sensor faults. Faults and input constraint are important factors that affect the stability and performance of a control system. Actuators and sensors are the most vulnerable components, with the former receiving more attention in comparison. In this paper, sensor faults are first transformed into pseudo-actuator faults through the augmented matrix approach, which facilitates their handling together with actuator faults. Saturation constraints on the control signal are not conducive to the design of the controller. The conversion of an input-saturated function to a time-varying linear system is completed based on function approximation and Lagrange’s mean value theorem. Moreover, a nonlinear system with unknown input gain and uncertainties is constructed using these methods. Next, an L1 adaptive fault-tolerant controller is designed to cope with uncertainties, including system uncertainties, external disturbances, faults, and approximation errors. In the L1 adaptive controller, the online estimation of the time-varying parameters allows for updating of the system state, while the combination of the two is transmitted to the control law such that it can compensate for the effects of the uncertainties. The stability and performance boundaries are further derived using the Lyapunov theory and the L1 reference system. Finally, simulations are carried out to demonstrate the effectiveness of the proposed controller.
This paper proposes a novel interconnected observer to get good estimates of attitude and gyro bias from high-noise vector measurements. The observer is derived based on the theory of nonlinear and linear cascade systems, and its error dynamics have the properties of global exponential stability and robustness to bounded noise. These properties ensure the convergence and boundedness of the attitude and gyro bias estimation errors. To obtain higher estimation accuracy, an approach to calculate time-varying gains for the proposed auxiliary observer is designed under the premise of considering noise terms in the rate gyro and vector sensors. The simulation results show that when the vector sensors’ outputs contain high-level noise, the proposed observer with time-varying gains yields better performance in both the transient and steady-state phases.
A dual-loop fault-tolerant control scheme is investigated for UAV attitude control systems subject to actuator faults, input saturation, and external disturbances in this paper. In the outer loop of attitude angles, a nonlinear dynamic inversion controller is developed as baseline controller for fast response and is augmented by a neural network disturbance observer to enhance the adaptability and robustness. Considering input saturation, actuator faults, and external disturbances in the inner loop of attitude angle velocities, the unbalanced input saturation is first converted into a time-varying system with unknown parameters and disturbances using a nonlinear function approximation method. An L1 adaptive fault-tolerant controller is then introduced to compensate for the effects of lumped uncertainties including system uncertainties, actuator faults, external disturbances, and approximation errors, and the stability and performance boundaries are verified by Lyapunov theorem and L1 reference system. Some simulation examples are carried out to demonstrate its effectiveness.