This literature review focuses on the nitriding treatments of nickel-based superalloy UNS N07718, also called INCONEL 718. This alloy was selected due to the relevance of this alloy in the aerospace and oil and gas industries. The referenced studies reflect a clear trend towards improving superalloys through advanced nitriding processes, highlighting plasma nitriding as one of the most promising techniques to enhance alloy 718 against corrosion and wear. The importance of optimizing nitriding parameters, such as temperature and time, is emphasized to increase wear and corrosion resistance while minimizing adverse effects like delamination or the formation of undesirable phases. Finally, the most appropriate alternatives for future research are recommended.
Inconel 718 is widely used in chloride-bearing environments where localized corrosion resistance is critical. This study assesses the effect of continuous low-temperature plasma nitriding (425 °C, 2 h) on the microstructure, hardness, and localized corrosion behavior of Inconel 718. The nitriding treatment produced a surface layer with hardness values up to three times higher than those of the untreated material, associated with a nitrided layer of thickness 6.1–6.7 µm. X-ray diffraction confirmed the precipitation of CrN without the formation of nitrogen-expanded phases. Cyclic polarization tests revealed non-significant changes in the corrosion parameters, except for a two-fold increase in the corrosion rate of nitrided samples. Also, the critical pitting temperature (CPT) decreased by more than 30 °C on average in the nitrided condition, falling below 10 °C. These findings indicate that, although continuous plasma nitriding enhances surface hardening, it significantly compromises the alloy’s resistance to localized corrosion in chloride-rich environments.
This study presents a numerical investigation of supercooled large-droplet (SLD)impingement and collection efficiency on a symmetric NACA\,0024 airfoil at achord Reynolds number of $\Rey = 3.33 \times 10^{6}$ under glaze-icing flightconditions. A quasi-two-dimensional, incompressible Eulerian flow field iscomputed using the finite-volume solver OpenFOAM\,2506, employing the$k$--$\omega$ SST turbulence closure with standard wall functions on anunstructured hexahedral-dominant mesh generated by \texttt{snappyHexMesh}. Theconverged velocity field is subsequently used as a frozen background flow foran off-line Lagrangian trajectory integration of water droplets, whose equationsof motion incorporate Schiller--Naumann drag correction and gravitational bodyforce. The local collection efficiency $\betacol(s)$ and total collectionefficiency $\Ecol$ are derived analytically from the computed droplet impingementpatterns for four median-volume diameters ($\MVD = 20,\,50,\,100$, and\SI{200}{\micro\meter}), spanning Stokes numbers $\Stk \in [0.063,\,6.34]$.Grid independence is demonstrated across three mesh densities (coarse:\num{71843} cells; medium: \num{890013} cells; fine: \num{2132001} cells),showing $\Ecol$ variations below \SI{5}{\percent} between the medium and finegrids for $\MVD \geq \SI{50}{\micro\meter}$. Results indicate strongconcentration of impingement near the leading edge ($x/c < 0.05$) for alldroplet sizes, with $\Ecol$ increasing monotonically from \num{0.035} at$\MVD = \SI{20}{\micro\meter}$ to \num{0.450} at$\MVD = \SI{200}{\micro\meter}$, in good qualitative agreement withLEWICE\,3.2 benchmarks for symmetric profiles. The proposed workflow providesan open-source, computationally tractable methodology for icing certificationstudies.