Tumor emboli—aggregates of tumor cells within vessels—pose a clinical challenge as they are associated with increased metastasis and tumor recurrence. When growing within a vessel, tumor emboli are subject to a unique mechanical constraint provided by the tubular geometry of the vessel. Current models of tumor emboli use unconstrained multicellular tumor spheroids, which neglect this mechanical interplay. Here, we modeled a lymphatic vessel as a 200 μm-diameter channel in either a stiff or soft, bioinert agarose matrix to create a vessel-like constraint model (VLCM), and we modeled colon or breast cancer tumor emboli with aggregates of HCT116 or SUM149PT cells, respectively. The stiff matrix VLCM constrained the tumor emboli to the cylindrical channel, which led to continuous growth of the emboli, in contrast to the growth rate reduction that unconstrained spheroids exhibit. Emboli morphology in the soft matrix VLCM, however, was dependent on the magnitude of mechanical mismatch between the matrix and the cell aggregates. In general, when the elastic modulus of the matrix of the VLCM was greater than the emboli (E_VLCM/E_emb > 1), the emboli were constrained to grow within the channel, and when the elastic modulus of the matrix was less than the emboli (0 < E_VLCM/E_emb < 1), the emboli bulged into the matrix. Due to a large difference in myosin II expression between the cell lines, we hypothesized that tumor cell aggregate stiffness is an indicator of cellular force-generating capability. Inhibitors of myosin-related force generation decreased the elastic modulus and/or increased the stress relaxation of the tumor cell aggregates, effectively increasing the mechanical mismatch. The increased mechanical mismatch after drug treatment was correlated with increased confinement of tumor emboli growth along the channel, which may translate to increased tumor burden due to the increased tumor volume within the diffusion distance of nutrients and oxygen.

Volumetric muscle loss (VML) represents a devastating extremity injury which leads to chronic functional deficits and disability and is unrecoverable through normal healing pathways. When left untreated, the VML pathophysiology creates many challenges towards successful treatment, such as altered residual muscle architecture, excessive fibrosis, and contracture(s). As such, innovative approaches and technologies are needed to prevent or reverse these adverse sequelae. Development of a rationally designed biomaterial technology which is intended to be acutely placed within a VML defect – i.e., to serve as a muscle void filler (MVF) by maintaining the VML defect – could address this clinical unmet need by preventing these adverse sequelae as well as enabling multi-staged treatment approaches. To that end, three biomaterials were evaluated for their ability to serve as a provisional MVF treatment intended to stabilize a VML defect in a rat model for an extended period (28 days): polyvinyl alcohol (PVA), hyaluronic acid and polyethylene glycol combination (HA + PEG), and silicone, a clinically used soft tissue void filler. HA + PEG biomaterial showed signs of deformation, while both PVA and silicone did not. There were no differences between treatment groups for their effects on adjacent muscle fiber count and size distribution. Not surprisingly, silicone elicited robust fibrotic response resulting in a fibrotic barrier with a large infiltration of macrophages, a response not seen with either the PVA or HA + PEG. Taken together, PVA was found to be the best material to be used as a provisional MVF for maintaining VML defect volume while minimizing adverse effects on the surrounding muscle.

Treatment of volumetric muscle loss (VML) faces challenges due to its unique pathobiology and lower priority in severe musculoskeletal injury management. Consequently, a need exists for multi-stage VML treatment strategies to accommodate delayed interventions owing to comorbidity management or prolonged casualty care in combat settings. To this end, polyvinyl alcohol (PVA) was used at concentrations of 5%, 7.5%, and 10% to generate provisional muscle void fillers (MVFs) of varying stiffness values (1.125 kPa, 3.700 kPa, and 7.699 kPa) to stabilize VML injuries as part of a two-stage approach. These were implanted into a rat model for a duration of 4 weeks, then explanted and either left untreated (control) or treated through minced muscle grafting (MMG). Additional benchmarks included acute MMG and unrepaired groups. At the MVF explant, the 7.5% PVA group exhibited superior neuromuscular function compared to the 5% and 10% PVA groups, the least fibrosis, and the largest median myofiber size among all groups at the 12-week endpoint. Despite the 7.5% PVA’s superiority amongst the two-stage treatment groups, neuromuscular function was neither improved nor impaired relative to acute treatment benchmarks. This suggests that the future success of a two-stage VML treatment strategy will necessitate a more effective definitive intervention.

Aims: Open fractures pose a substantial treatment challenge, with adjacent muscle loss being a major complication. The induced membrane (IM) technique has shown promise in treating complicated fractures. The aim of this study is to investigate the impact of adjacent muscle trauma on segmental fracture healing using recombinant human bone morphogenetic protein-2 (rhBMP-2) via the IM technique.Methods: Skeletally mature male rats (n = 10 to 11 per group) underwent unilateral 3 mm segmental bone defects (SBD) of the tibial diaphysis or a composite tissue injury (CTI), which included a SBD along with volumetric muscle loss (VML). A polymethyl methacrylate (PMMA) spacer was formed within the SBD of each rat. After a four-week period, the PMMA spacer was removed, and the defect was treated with a rhBMP2-impregnated collagen sponge. Longitudinal micro-CT (µCT) imaging was conducted at baseline (Day 0) and at weeks 2, 4, 8, and 12 post-spacer removal to monitor fracture healing progress. At the 12-week postoperative mark, a comprehensive analysis was conducted, including endpoint µCT analysis, evaluation of neuromuscular function, tibia torsional testing, and histological examination.Results: Longitudinal µCT scans revealed no differences in bone formation or bone mineral density (BMD) at any timepoint between the SBD and CTI groups. High-resolution µCT analysis at the endpoint also showed no variations in bone quality. Torsion testing confirmed that VML did not affect bone strength. Notably, CTI animals exhibited an irreversible reduction in muscle mass and neuromuscular function, which was not observed in the SBD group.Conclusion: Introducing the additional challenge of VML alongside SBD did not hinder the effectiveness of the induced membrane technique in healing a critical-sized defect.Cite this article: Bone Joint Res 2025;14(6):568–577.

Tumor emboli – aggregates of tumor cell within vessels – pose a clinical challenge as they are associated with increased metastasis and tumor recurrence. When growing within a vessel, tumor emboli are subject to a unique mechanical constraint provided by the tubular geometry of the vessel. Current models of tumor emboli use unconstrained multicellular tumor spheroids, which neglect this mechanical interplay. Here, we modelled a lymphatic vessel as a 200 μm-diameter channel in either a stiff or soft, bioinert agarose matrix, and we modelled colon or breast cancer tumor emboli with aggregates of HCT116 or SUM149PT cells, respectively. The stiff vessel model constrained the tumor emboli to the cylindrical geometry, which led to continuous growth of the emboli, in contrast to the growth plateau that unconstrained spheroids exhibit. Emboli morphology in the soft vessel model, however, was dependent on the magnitude of mechanical mismatch between the vessel matrix and the cell aggregates. In general, when the elastic modulus of the vessel was greater than the emboli ( E _ves / E _emb > 1), the emboli were constrained to grow within the vessel geometry, and when the elastic modulus of the vessel was less than the emboli (0 < E _ves / E _emb < 1), the emboli bulged into the matrix. Inhibitors of myosin-related force generation decreased the elastic modulus and/or increased the stress relaxation of the tumor cell aggregates, effectively increasing the mechanical mismatch. The increased mechanical mismatch after drug treatment was correlated with increased confinement of tumor emboli growth along the vessel, which may translate to increased tumor burden due to the increased tumor volume within the diffusion distance of nutrients and oxygen. INSIGHT BOX: The growth of tumor emboli—aggregates of tumor cells within vessels—is associated with aggressive cancer progression and metastasis. Models of their growth have not taken into account their biomechanical context, where radial expansion is constrained, but lengthwise expansion is free in the vessel. Here, we modelled the vessel geometry with a cylindrical microchannel in a hydrogel. In contrast to unconstrained or fully embedded aggregates, vessel-like constraint promotes growth of emboli in our model. The growth advantage is increased when the matrix is stiffened or actomyosin contractility weakened, both of which effectively increase the magnitude of mechanical constraint. This study sheds light on increased tumor burden in vessel-based growth and indicates a need to study tumor progression in similar environments.