A 3D thermal response model is developed to evaluate the thermal behavior of glass fiber/phenolic composite exposed to heat flux on one side. The model is built upon heat transfer and energy conservation equations in which the heat transfer is in the form of anisotropic heat conduction, absorption by matrix decomposition, and diffusion of gas. Arrhenius equation is used to characterize the pyrolysis reaction of the materials. The diffusion equation for the decomposition gas is included for mass conservation. The temperature, density, decomposition degree, and rate are extracted to analyze the process of material decomposition, which is implemented by using the UMATHT (User subroutine to define a material’s thermal behavior) and USDFLD (User subroutine to redefine field variables) subroutines via ABAQUS code. By comparing the analysis results with experimental data, it is found that the model is valid to simulate the evolution of a glass fiber/phenolic composite exposed to heat flux from one side. The comparison also shows that longer time is taken to complete the pyrolysis reaction with increasing depth for materials from the numerical simulation, and the char region and the pyrolysis reaction region enlarge further with increasing time. Furthermore, the decomposition degree and temperature are correlated with depths, as well as the peak value of decomposition rate and the time to reach the peak value.
Carbon fiber-reinforced epoxy resin composites have poor high temperature resistance and are prone to thermal damage during service in the aerospace field. The purpose of this study was to evaluate the thermal decomposition (pyrolysis) characteristics of carbon fiber-reinforced epoxy composites and reasonably predict their thermal decomposition under arbitrary temperature conditions. The kinetic analysis was conducted on the thermal decomposition of carbon fiber-reinforced epoxy resin composites (USN15000/9A16/RC33, supplied by Weihai GuangWei Composites Co., Ltd. Weihai City, Shandong Province, China) under a nitrogen environment, and an improved model of pyrolysis prediction suitable for the arbitrary temperature program was developed in this work. The results showed that the carbon fiber-reinforced epoxy composites begin to degrade at about 500 K, and the peak value of the weight loss rate at the respective heating rate appears in the range of 650 K to 750 K. A single-step reaction can characterize the thermal decomposition of carbon fiber-reinforced epoxy composites in a nitrogen atmosphere, and a wide variety of isoconversional approaches can be used for the calculation of the kinetic parameters. The proposed model of pyrolysis prediction can avoid numerous limitations of temperature integration, and it shows good prediction accuracy by reducing the temperature rise between sampling points. This study provides a reference for the kinetic analysis and pyrolysis prediction of carbon fiber-reinforced epoxy composites.
Evacuation simulation is an important method for studying and evaluating the safety of passenger evacuation, and the key lies in whether it can accurately predict personnel evacuation behavior in different environments. The existing models have good adaptability in building environments but have weaker adaptability to personnel evacuation in civil aircraft cabins with more obstacles and stronger hindrances. We target the narrow seat aisle environment on airplanes and use a BP neural network to establish a continuous displacement model for personnel evacuation. We compare the simulation accuracy of evacuation time with the social force model based on continuous displacement and further compare the similarity of personnel evacuation process behavior. The results show that both models were close to the experimental values in simulating evacuation time, while our BP neural network evacuation model based on experimental data was more accurate in predicting the personnel evacuation process, showing more realistic details such as the probability of conflicts and bottleneck evolution in the cross aisle.
This study investigates the mechanical performance and blast resistance of high-performance aramid, carbon, and ultra-high molecular weight polyethylene (UHMWPE) fiber fabrics, responding to the need for lightweight and flexible materials in anti-explosion containers for aviation and critical infrastructure. The experimental methodology integrated quasi-static and dynamic tensile tests to characterize the strain-rate effect, followed by near-field air blast tests on both single-material and hybrid multi-ply fabric specimens to analyze their dynamic response, failure modes, and overpressure attenuation. Key findings revealed that carbon fabric exhibited high stiffness but was strain-rate insensitive and susceptible to brittle perforation failure, whereas aramid and UHMWPE fabrics demonstrated strain-rate sensitivity, with UHMWPE showing superior ductility and energy absorption. The hybrid multi-ply configuration (A-C-U sequence) achieved the least amount of failure, effectively utilizing the wave impedance of aramid fabric for initial shock reflection, high stiffness of carbon fabric for stress homogenization, and plasticity of UHMWPE fabric for energy dissipation. Additionally, all fabrics attenuated peak overpressure by over 80%, with enhancement observed for increased thickness. The study concludes that the strategic layering of different fabrics creates a synergistic effect, mitigating the weaknesses of individual fabrics and establishing an effective design paradigm for advanced blast-resistant structures, further enhancing the protective performance.
This study aims to compare the restraint performance of two child restraint systems (CRSs) used on airplanes—a rear-facing child seat (RFCS) and the child aviation restraint system (CARES)—for 1.5-year-old children, along with their compatibility with different types of aircraft seats. 16 g longitudinal dynamic tests were conducted on two types of aircraft seats with CRSs. Results indicate poor compatibility of CARES with Type A seats, significantly increasing the risk of head, neck, and abdominal injuries, with Nij exceeding the acceptable limit. In contrast, CARES exhibited good compatibility with Type B seats and effectively protected children. RFCS tests demonstrated effective injury risk reduction on both types of seats. It can be found that the performance of CARES depends on restraint status and seat dimensions; RFCSs provide adequate protection for 1.5-year-olds. Optimal protection can be achieved with smaller restrain angles of CRS and using thinner seat cushions. Compared to CARES, RFCSs better adapt to various aircraft seat structures, offering superior child protection.
The present studies focus on the analysis of the inherent differences between temperature- and pyrolysis-based models and foster a rational and comprehensive understanding of numerical models for lightning strike damage in laminated composites. A systematic methodology combining numerical simulation and pyrolysis kinetics analysis has been developed to examine the inherent differences in damage area and depth, damage threshold, electrical conductivity characteristics, and Joule energy between temperature- and pyrolysis-based models. The results indicate that the pyrolysis-based model demonstrates closer agreement with experimental data in terms of both damage area and damage depth predictions compared to the temperature-based model. The two damage thresholds (500 °C and pyrolysis degree of 0.1) yield equivalent predictions of overall damage, but the temperature-based criterion neglects localized heating rate effects. The pyrolysis-based model exhibits significantly delayed through-thickness conductivity development during initial current conduction compared to the temperature-based model due to the influence of heating rate. This lag results in the pyrolysis-based model predicting larger damage areas and shallower penetration depths. Joule heating analysis further confirms that the pyrolysis-based model exhibits higher overall electrical resistance than the temperature-based model. Through a systematic comparison of temperature- and pyrolysis-based models, this research holds the significance of enhancing the understanding of lightning strike damage mechanisms and advancing the development of high-fidelity numerical models for predicting lightning strike damage in laminated composite.