This review provides a comprehensive overview of the latest nanochemistry advancements in the design, synthesis, and utilization of engineered gold nanostructures (GNSs) for dental healthcare applications.

Wearable strain–humidity sensors are increasingly recognized for their role in healthcare and detecting human motion signals. However, many strain–humidity sensors require complex manufacturing processes and have limited applicability. In this study, based on the good miscibility between natural rubber latex (NRL) and poly (3,4‐ethylenedioxythiophene):poly (4‐styrenesulfonate) (PEDOT:PSS), PEDOT:PSS/NRL composite conductors are transferred onto fabric substrate through screen printing and prepared high‐performance strain–humidity sensor. The PEDOT:PSS/NRL blends strain–humidity sensor exhibited good stability and durability (500 cycles) at 10% strain, achieves a gauge factor (GF) of 123.8 with excellent linearity, making it operational in detecting various human motions, such as finger bending, elbow bending, wrist bending, and so on. In addition, the PEDOT:PSS and water molecules interaction results in a humidity response time as low as 0.72 s and recovery time as low as 0.85 s for the PEDOT:PSS/NRL composite strain–humidity sensor, and a wide relative humidity detection range (6–83%), allowing it to be utilized for precise detection of human breathing. Furthermore, it can monitor the use's joint movement, facial muscle movement, and respiratory rate, which show its potential application prospect in health monitoring.

Exosomes, a type of extracellular vesicles, have attracted considerable attention due to their ability to provide valuable insights into the pathophysiological microenvironment of the cells from which they originate. This characteristic implicates their potential use as diagnostic disease biomarkers clinically, including cancer, infectious diseases, neurodegenerative disorders, and cardiovascular diseases. Aptasensors, which are electrochemical aptamers based biosensing devices, have emerged as a new class of powerful detection technology to conventional methods like ELISA and Western analysis, primarily because of their capability for high-performance bioanalysis. This review covers the current research landscape on the detection of exosomes utilizing nanoarchitectonics strategy for the development of electrochemical aptasensors. Strategies involving signal amplification and biofouling prevention are discussed, with an emphasis on nanoarchitectonics-based bio-interfaces, showcasing their potential to enhance sensitivity and selectivity through optimal conduction and mass transport properties. The ongoing challenges to broaden the clinical applications of these biosensors are also highlighted.

We report the production of a specific monoclonal antibody against Nitrazepam (NZP). First, the hapten 7-aminonitrazepam (7-ANZP) was synthesized, then the hapten was coupled with bovine serum albumin and ovalbumin by the diazotization method, and used as immunogen and coating antigen. Factors affecting binding, ionic strength, pH, and methanol concentration in phosphate-buffered saline, were optimized. The monoclonal antibody had a satisfactory IC₅₀ of 0.2 ng/mL for NZP. The cross-reactivities with other analogs were all lower than 0.1% except for 23% with 7-NZP, which suggested that the enzyme-linked immunosorbent assay method possessed high specificity. The recoveries were in the range of 84–95%, indicating that the method could be applied for the detection of NZP in urine.

Wearable electronic sensors have recently attracted tremendous attention in applications such as personal health monitoring, human movement detection, and sensory skins as they offer a promising alternative to counterparts made from traditional metallic conductors and bulky metallic conductors. However, the real-world use of most wearable sensors is often hindered by their limited stretchability and sensitivity, and ultimately, their difficulty to integrate into textiles. To overcome these limitations, wearable sensors can incorporate flexible conductive fibers as electrically active components. In this study, we adopt a scalable wet-spinning approach to directly produce flexible and conductive fibers from aqueous mixtures of Ti₃C₂T_x MXene and natural rubber (NR). The electrical conductivity and stretchability of these fibers were tuned by varying their MXene loading, enabling knittability into textiles for wearable sensors. As individual filaments, these MXene/NR fibers exhibit suitable conductivity dependence on strain variations, making them ideal for motivating sensors. Meanwhile, textiles from knitted MXene/NR fibers demonstrate great stability as capacitive touch sensors. Collectively, we believe that these elastic and conductive MXene/NR-based fibers and textiles are promising candidates for wearable sensors and smart textiles.