Fa-Bing Tan

Dr. Fa-Bing Tan


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
RZRuo-Jin Zhang
Ruo-Jin Zhang
LZLan Zhao
Lan Zhao
LYLu-Xiang Yu
Lu-Xiang Yu
FTFa-Bing Tan
Fa-Bing Tan
The study of denture base resin fabricated by digital technology with surface properties or color stability remains limited. In this study, thermal cycling and staining media (distilled water, artificial saliva, green tea, and Coca-Cola) immersion were used to simulate the intraoral environment to assess the surface properties and color stability of CAD/CAM (milled) and 3D-printed base resin materials, the conventionally polymerized base served as the control group. After thermal cycling, all groups showed increased surface roughness, contact angle (i.e. hydrophilicity) and color difference (∆E), the 3D-printed group had the most significant increase among the 3 groups (P<0.001). While there were no significant difference (or the difference is very small) between the conventional and milled groups. After 7 and 30 days of immersion in four staining media, the ∆E values remained highest in the 3D-printed group (∆E ≥ 3.34) (P<0.001), exceeding the clinically acceptable threshold (∆E = 2.7) at 30 days. Additionally, all groups showed significantly higher ∆E values after 30 days compared to 7 days (P<0.05). The 3D-printed group exhibited a rougher surface, poorer hydrophilicity, and reduced color stability compared to the conventional or milled groups, indicating that further improvements are needed before clinical application.

5 April 2024 in JMIR Serious Games
Verified
Journal Article
Open access
KLKeXin Liu
KeXin Liu
YXYaQian Xu
YaQian Xu
CMChaoYi Ma
ChaoYi Ma
NYNa Yu
Na Yu
FTFa-Bing Tan
Fa-Bing Tan
MPMengWei Pang
MengWei Pang
Background: Removable partial denture (RPD) design is crucial to long-term success in dental treatment, but shortcomings in RPD design training and competency acquisition among dental students have persisted for decades. Digital production is increasing in prevalence in stomatology, and a digital RPD (D-RPD) module, under the framework of the certified Objective Manipulative Skill Examination of Dental Technicians (OMEDT) system reported in our previous work, may improve on existing RPD training models for students. Objective: We aimed to determine the efficacy of a virtual 3D simulation–based progressive digital training module for RPD design compared to traditional training. Methods: We developed a prospective cohort study including dental technology students at the Stomatology College of Chongqing Medical University. Cohort 1 received traditional RPD design training (7 wk). Cohort 2 received D-RPD module training based on text and 2D sketches (7 wk). Cohort 3 received D-RPD module pilot training based on text and 2D sketches (4 wk) and continued to receive training based on 3D virtual casts of real patients (3 wk). RPD design tests based on virtual casts were conducted at 1 month and 1 year after training. We collected RPD design scores and the time spent to perform each assessment. Results: We collected the RPD design scores and the time spent to perform each assessment at 1 month and 1 year after training. The study recruited 109 students, including 58 (53.2%) female and 51 male (56.8%) students. Cohort 1 scored the lowest and cohort 3 scored the highest in both tests (cohorts 1-3 at 1 mo: mean score 65.8, SD 21.5; mean score 81.9, SD 6.88; and mean score 85.3, SD 8.55, respectively; P<.001; cohorts 1-3 at 1 y: mean score 60.3, SD 16.7; mean score 75.5, SD 3.90; and mean score 90.9, SD 4.3, respectively; P<.001). The difference between cohorts in the time spent was not statistically significant at 1 month (cohorts 1-3: mean 2407.8, SD 1370.3 s; mean 1835.0, SD 1329.2 s; and mean 1790.3, SD 1195.5 s, respectively; P=.06) but was statistically significant at 1 year (cohorts 1-3: mean 2049.16, SD 1099.0 s; mean 1857.33, SD 587.39 s; and mean 2524.3, SD 566.37 s, respectively; P<.001). Intracohort comparisons indicated that the differences in scores at 1 month and 1 year were not statistically significant for cohort 1 (95% CI –2.1 to 13.0; P=.16), while cohort 3 obtained significantly higher scores 1 year later (95% CI 2.5-8.7; P=.001), and cohort 2 obtained significantly lower scores 1 year later (95% CI –8.8 to –3.9; P<.001). Conclusions: Cohort 3 obtained the highest score at both time points with retention of competency at 1 year, indicating that progressive D-RPD training including virtual 3D simulation facilitated improved competency in RPD design. The adoption of D-RPD training may benefit learning outcomes.

1 January 2021 in The Journal of Advanced Prosthodontics
Verified
Journal Article
Open access
PDF file
NYNa Yu
Na Yu
HDHong-Wei Dai
Hong-Wei Dai
FTFa-Bing Tan
Fa-Bing Tan
JSJinlin Song
Jinlin Song
CMChao-Yi Ma
Chao-Yi Ma
XTXue-Lu Tong
Xue-Lu Tong
Yu N, et al. J Adv Prosthodont. 2021 Oct;13(5):333-342. https://doi.org/10.4047/jap.2021.13.5.333

17 March 2025 in PeerJ
Verified
Journal Article
Open access
PDF file
SXShuang Xiao
Shuang Xiao
RZRuo-Jin Zhang
Ruo-Jin Zhang
FTFa-Bing Tan
Fa-Bing Tan
Purpose: The purpose of this study is to evaluate the impact of thermal cycling on the mechanical properties of conventional, milled, and 3D-printed denture base materials. Methods: Unigraphics NX software was used to design the sample data, after which denture base resin samples were fabricated using conventional polymerization (conventional), milling, and 3D-printing techniques. Flexural strength, Vickers hardness, and impact strength of each group of samples were evaluated both before and after 10,000 thermal cycles in distilled water at 5 °C and 55 °C (n = 8/group). Statistical analysis of the data was conducted using the Kruskal-Wallis H test, Weibull analysis and Spearman correlation analysis. Results: The flexural strength and impact strength of the 3D-printed group significantly decreased after thermal cycling (P = 0.001), whereas no significant differences were observed before and after thermal cycling in the conventional or milled groups (P > 0.05). No significant correlation was found between flexural strength and impact strength for any of the groups. The Weibull modulus of 3D printed groups for both flexural and impact strength decreased after thermal cycling. The Vickers hardness of the conventional group increased significantly after thermal cycling, while Vickers hardness significantly decreased in the milled or 3D-printed groups (P < 0.05). Conclusion: Compared with the conventional or milled groups, thermal cycling had a more pronounced effect on the flexural strength, Vickers hardness, and impact strength of the 3D-printed group. These findings indicate that further improvements (e.g., material composition, printing parameters and post-processing) in the mechanical properties of 3D-printed materials is necessary before clinical application.

1 January 2018 in The Journal of Advanced Prosthodontics
Verified
Journal Article
Open access
PDF file
FTFa-Bing Tan
Fa-Bing Tan
CWChao Wang
Chao Wang
HDHong-Wei Dai
Hong-Wei Dai
Yubo FanYubo Fan
Yubo Fan
JSJinlin Song
Jinlin Song
Tan FB, et al. J Adv Prosthodont. 2018 Feb;10(1):8-17. https://doi.org/10.4047/jap.2018.10.1.8