Solution-processed polycrystalline perovskite film is promising for the next generation X-ray imaging. However, the spatial resolution of current perovskite X-ray panel detectors is far lower than the theoretical limit. Herein we find that the pixel level non-uniformity, also known as fixed pattern noise, is the chief culprit affecting the signal-to-noise ratio and reducing the resolution of perovskite detectors. We report a synergistic strategy of rheological engineering the perovskite suspensions to achieve X-ray flat panel detectors with pixel-level high uniformity and near-to-limit spatial resolution. Our approach includes the addition of methylammonium iodide and polyacrylonitrile to the perovskite suspension, to synergistically enhance the flowability and particle stability of the oversaturated solution. The obtained suspension perfectly suits for the blade-coating process, avoiding the uneven distribution of solutes and particles within perovskite films. The assembled perovskite panel detector exhibits greatly improved fixed pattern noise value (1.39%), high sensitivity (2.24 × 104 μC Gyair−1 cm−2), low detection limit (28.57 nGyair·s−1) as well as good working stability, close to the performance of single crystal detectors. Moreover, the detector achieves a near-to-limit resolution of 0.51 lp/pix.
Next-generation wide color gamut displays require the development of efficient and toxic-free light-emitting materials meeting the crucial Rec. 2020 standard. With the rapid progress of green and red perovskite light-emitting diodes (PeLEDs), blue PeLEDs remain a central challenge because of the undesirable color coordinates and poor spectra stability. Here, we report Cs 3 CeBr x I
6−
x ( x = 0 to 6) with the cryolite-like structure and stable and tunable color coordinates from (0.17, 0.02) to (0.15, 0.04). Further encouraged by the short exciton lifetime (26.1 ns) and high photoluminescence quantum yield (~76%), we construct Cs 3 CeBr x I
6−
x -based rare-earth LEDs via thermal evaporation. A seed layer strategy is conducted to improve the device’s performance. The optimal Cs 3 CeI 6 device achieves a maximum external quantum efficiency of 3.5% and a luminance of 470 cd m −2 with stable deep-blue color coordinates of (0.15, 0.04). Our work opens another avenue to achieving efficient and spectrally stable deep-blue LEDs.
In this article, two different types of spacer cations, 1,4‐butanediamonium (BDA2+) and 2‐phenylethylammonium (PEA+) are co‐used to prepare the perovskite precursor solutions with the formula of (BDA)1‐a(PEA2)aMA4Pb5X16. By simply mixing the two spacer cations, the self‐assembled polycrystalline films of (BDA)0.8(PEA2)0.2MA4Pb5X16 are obtained, and BDA2+ is located in the crystal grains and PEA+ is distributed on the surface. The films display a small exciton binding energy, uniformly distributed quantum wells and improved carrier transport. Besides, utilizing mixed spacer cations also induces better crystallinity and vertical orientation of 2D perovskite (BDA)0.8(PEA2)0.2MA4Pb5X16 films. Thus, a power conversion efficiency (PCE) of 17.21% is achieved in the optimized perovskite solar cells with the device structure of ITO/PEDOT:PSS/Perovskite/PCBM/BCP/Ag. In addition, the complementary humidity and thermal stability are obtained, which are ascribed to the enhanced interlayer interaction by BDA2+ and improved moisture resistance by the hydrophobic group of PEA+. The encapsulated devices are retained over 95% or 75% of the initial efficiency after storing 500 h in ambient air under 40 ± 5% relative humidity or 100 h in nitrogen at 60 °C.
In this article, in order to study the lead-free perovskite CH3NH3SnI3 (MASnI3) reaction mechanism between perovskite surface molecules and gas molecules, we fabricated models for three different gas molecules adsorbing on an MASnI3 surface.