A holistic approach to fully characterize the physical–chemical properties of N doped TiO2 and evaluate its true impact on photoelectrochemical applications.
The effect of Furnace Annealing (FA) and Rapid Thermal annealing (RTA) on the structural and optical properties of GaAs1 − xBix/GaAs single quantum wells grown on (001) and (311)B substrates by molecular beam epitaxy was investigated. The structural properties were investigated by high-resolution x-ray diffraction (HR-XRD) and Transmission Electron Microscopy. The Bi concentration profiles were determined by simulating the HR-XRD 2θ−ω scans using dynamical scattering theory to estimate the Bi content, lattice coherence, and quality of the interfaces. The Bi composition was found to be similar for both samples grown on (001) and (311)B GaAs substrates. However, the simulations indicate that the Bi composition is not only limited in the GaAsBi quantum well (QW) layer but also extends out of the GaAsBi QW toward the GaAs barrier. Photoluminescence (PL) measurements were performed as a function of temperature and laser power for samples with a nominal Bi composition of 3%. PL spectra showed that (001) and (311)B samples have different peak energies at 1.23 eV and 1.26 eV, respectively, at 10 K. After RTA at 300 °C for 2 min, the PL intensity of (311)B and (001) samples was enhanced by factors of ∼2.5 and 1.75, respectively. However, for the (001) and (311)B FA samples, an enhancement of the PL intensity by a factor of only 1.5 times could be achieved. The enhancement of PL intensity in annealed samples was interpreted in terms of PL activation energies, with a reduction in the alloy disorder and an increase in the Bi cluster.
Modern consumption patterns have led to a surge in waste glass accumulating in municipal landfills, contributing to environmental pollution, especially in countries that do not have well-established recycling standards. While glass itself is 100% recyclable, the logistics and handling involved present significant challenges. Flint and amber-colored glass, often found in high quantities in municipal waste, can serve as valuable sources of raw materials. We propose an affordable route that requires just a thermal treatment of glass waste to obtain glass-based antimicrobial materials. The thermal treatment induces crystallized nanoregions, which are the primary factor responsible for the bactericidal effect of waste glass. As a result, coarse particles of flint waste glass that undergo thermal treatment at 720 °C show superior antimicrobial activity than amber waste glass. Glass-ceramic materials from flint waste glass, obtained by thermal treatment at 720 °C during 2 h, show antimicrobial activity against Escherichia coli after just 30 min of contact time. Laser-induced breakdown spectroscopy (LIBS) was employed to monitor the elemental composition of the glass waste. The obtained glass-ceramic material was structurally characterized by transmission electron microscopy, enabling the confirmation of the presence of nanocrystals embedded within the glass matrix.