We have studied the effect of doping on the temperature performance of a split-well (SW) direct-phonon (DP) terahertz (THz) quantum-cascade laser (QCL) scheme supporting a clean three-level system. Achieving a system that is as close as possible to a clean n-level system proved to be the strategy that led to the best temperature performance in THz-QCLs. We expected to obtain a similar improvement to that observed in resonant-phonon (RP) schemes after increasing the carrier concentration from 3 × to 6 × . Our goal was to improve the temperature performance by increasing the doping, ideally the results should have improved. To our surprise, in the devices we checked, the results show the contrary. Although an increase in doping had previously shown a positive effect in RP schemes, our results indicated that this does not happen with SW–DP devices. However, we observed a significant increase in gain broadening and a reduction in the dephasing time as the doping and temperature increased. We attribute these effects to enhanced ionized-impurity scattering (IIS). The observation and study of effects related to dephasing included in our experimental work have previously only been possible via simulation.
We studied the temperature performance of split-well direct phonon terahertz quantum cascade lasers and found that it is limited by a lasing instability that becomes significant as the temperature increases. When the hot electrons of the upper laser level cannot scatter effectively to excited states due to the high radiative barriers of the structures, a lasing instability occurs, which limits the temperature performance.
Three different Terahertz quantum-cascade-laser designs supporting clean n-level systems were analyzed using nonequilibrium Green’s functions. In clean n-level systems, most of the electrons occupy the active laser levels, with thermally activated leakage channels being suppressed almost entirely up to room temperature. Simulations of the three designs, namely a resonant phonon design, a two-well design, and a split-well direct-phonon design were investigated. The results from the simulations indicated that the two-well design would perform best overall, in terms of variations in current density, interface roughness, and ionized impurity scattering. We conclude that future research aiming to improve the temperature performance of such laser designs should be based on a two-well design.
We present an experimental study on a terahertz quantum cascade laser (THz QCL) design that combines both two-well injector and direct-phonon scattering schemes, i.e., a so-called two-well injector direct-phonon design. As a result of the two-well injector direct-phonon scheme presented here, the lasers benefit from both a direct phonon scattering scheme for the lower laser level depopulation and a setback for the doping profile that reduces the overlap of the doped region with active laser states. Additionally, our design also has efficient isolation of the active laser levels from excited and continuum states as indicated by negative differential resistance behavior all the way up to room temperature. This scheme serves as a good platform for improving the temperature performance of THz QCLs as indicated by the encouraging temperature performance results of the device with a relatively high doping level of 7.56 × 1010 cm−2 and Tmax ∼ 167 K. With the right optimization of the molecular beam epitaxy growth and interface quality, the injection coupling strength, and the doping density and its profile, the device could potentially reach higher temperatures than the latest records reached for the maximum operating temperature (Tmax) of THz QCLs.
We propose a method to extract the upper laser level’s (ULL’s) excess electronic temperature from the analysis of the maximum light output power ( Pmax ) and current dynamic range Δ Jd = ( Jmax − Jth ) of terahertz quantum cascade lasers (THz QCLs). We validated this method, both through simulation and experiment, by applying it on THz QCLs supporting a clean three‐level system. Detailed knowledge of electronic excess temperatures is of utmost importance in order to achieve high temperature performance of THz QCLs. Our method is simple and can be easily implemented, meaning an extraction of the excess electron temperature can be achieved without intensive experimental effort. This knowledge should pave the way toward improvement of the temperature performance of THz QCLs beyond the state‐of‐the‐art.
1 January 2024 in Journal of Vacuum Science & Technology B
We hereby offer a comprehensive analysis of various factors that could potentially enable terahertz quantum cascade lasers (THz QCLs) to achieve room temperature performance. We thoroughly examine and integrate the latest findings from recent studies in the field. Our work goes beyond a mere analysis; it represents a nuanced and comprehensive exploration of the intricate factors influencing the performance of THz QCLs. Through a comprehensive and holistic approach, we propose novel insights that significantly contribute to advancing strategies for improving the temperature performance of THz QCLs. This all-encompassing perspective allows us not only to present a synthesis of existing knowledge but also to offer a fresh and nuanced strategy to improve the temperature performance of THz QCLs. We draw new conclusions from prior works, demonstrating that the key to enhancing THz QCL temperature performance involves not only optimizing interface quality but also strategically managing doping density, its spatial distribution, and profile. This is based on our results from different structures, such as two experimentally demonstrated devices: the spit-well resonant-phonon and the two-well injector direct-phonon schemes for THz QCLs, which allow efficient isolation of the laser levels from excited and continuum states. In these schemes, the doping profile has a setback that lessens the overlap of the doped region with the active laser states. Our work stands as a valuable resource for researchers seeking to gain a deeper understanding of the evolving landscape of THz technology. Furthermore, we present a novel strategy for future endeavors, providing an enhanced framework for continued exploration in this dynamic field. This strategy should pave the way to potentially reach higher temperatures than the latest records reached for Tmax of THz QCLs.