The dynamic characteristics of rigid-flexible manipulators involve complex rigid-flexible coupling phenomena, which essentially comprise a nonlinear distributed parameter system with infinite degrees of freedom. Consequently, it results in challenges to the manipulator’s precise positioning. This study combined a state feedback module and a fuzzy non-singular terminal sliding mode to suppress vibration and deformation. Using the improved fuzzy strategy and non-singular terminal sliding mode control, an adaptive dynamic supplementary control law is proposed. The results based on MATLAB simulation and a built hardware experiment show that this method is effective and superior. While realizing the accurate positioning of the end of the manipulator, the vibration of the end of the flexible arm is significantly suppressed. This method has a high tracking performance, which enables accurate positioning of the manipulator terminal and provides strong robustness under the action of bounded external interference.
1 January 2023 in Mathematical Biosciences and Engineering
The evaporation process is vital in alumina production, with mother liquor concentration serving as a critical control parameter. To address the challenge of online detection, we propose the introduction of a soft measurement strategy. First, due to the significant fluctuations in the production process variables and inter-variable coupling, comprehensive grey correlation analysis and kernel principal component analysis are employed to reduce the input dimension and computational complexity of the data, enhancing the efficiency of the soft sensing model. The reduced robust least-squares support-vector machine (LSSVM), with its commendable predictive performance, is used for modeling and predicting the principal components. Concurrently, an improved Pattern Search-Differential Evolution (PS-DE) algorithm is proposed for optimizing the pivotal parameters of the LSSVM network. Lastly, on-site industrial data validation indicates that the new model offers superior tracking capabilities and heightened accuracy. It is deemed aptly suitable for the online detection of mother liquor concentration.
Introduction: The control of infinite-dimensional rigid-flexible robotic arms presents significant challenges, with direct truncation of first-order modal models resulting in poor control quality and second-order models leading to complex hardware implementations.Methods: To address these issues, we propose a fuzzy super twisting mode control method based on approximate inertial manifold dimensionality reduction for the robotic arm. This innovative approach features an adjustable exponential non-singular sliding surface and a stable continuous super twisting algorithm. A novel fuzzy strategy dynamically optimizes the sliding surface coefficient in real-time, simplifying the control mechanism.Results: Our findings, supported by various simulations and experiments, indicate that the proposed method outperforms directly truncated first-order and second-order modal models. It demonstrates effective tracking performance under bounded external disturbances and robustness to system variability.Discussion: The method's finite-time convergence, facilitated by the modification of the nonlinear homogeneous sliding surface, along with the system's stability, confirmed via Lyapunov theory, marks a significant improvement in control quality and simplification of hardware implementation for rigid-flexible robotic arms.
In the alumina evaporation production process, accurate and reliable process data is crucial for the effectiveness of the soft measurement models used to estimate the concentration of the outlet mother liquor. However, process data is often compromised by harsh industrial conditions such as high temperature, pressure, and alkalinity, leading to measurement errors, missing data, and anomalies. To address these issues, we propose a robust data reconciliation method that utilizes redundant solution constraints and an improved particle swarm optimization (PSO) algorithm with chaotic mutation to correct erroneous measurements and estimate unmeasured variables. This method leverages redundant process data and integrates statistical analysis with process mechanisms to enhance data accuracy. The proposed method was tested on actual industrial data from a multi-effect evaporation system. Results demonstrate that our approach significantly improves the reliability of the reconciled data, providing a robust foundation for soft measurement models. This work presents a novel solution to the challenges of data reconciliation in complex industrial processes, ensuring better accuracy and reliability in the presence of harsh operational conditions.
1 January 2023 in Mathematical Biosciences and Engineering
To address the significant soft measurement errors in traditional static models for evaporation process parameters, which are characterized by continuity and cumulativity, this paper proposes a dynamic correction method for soft measurement models of evaporation process parameters based on the autoregressive moving-average model (ARMA). Initially, the Powell's directional evolution (Powell-DE) algorithm is utilized to identify the autoregressive order and moving average order of the ARMA model. Subsequently, the prediction error of a mechanism-reduced robust least squares support vector machine ensemble model is utilized as input. An error time series prediction model, which compensates for the errors in the autoregressive moving average model, is then applied for dynamic estimation of the prediction error. Finally, an integration strategy using the entropy method is employed to combine the static soft measurement model, based on the mechanism-reduced robust least squares support vector machine, with the dynamic correction soft measurement model, which is based on the error time series compensation of the ARMA model. The new model is analyzed and validated using production data from an alumina plant's evaporation process. Compared to traditional models, the new model demonstrates significantly improved prediction accuracy and is capable of dynamic prediction of evaporation process parameters.