Kawita Chattrakul

Ms. Kawita Chattrakul


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
KCKawita Chattrakul
Kawita Chattrakul
APAnothai Pholsuwan
Anothai Pholsuwan
ASAthapon Simpraditpan
Athapon Simpraditpan
Ekkachai MartwongEkkachai Martwong
Ekkachai Martwong
WCWichain Chailad
Wichain Chailad
This study developed sustainable biocomposites composed of polylactic acid (PLA) and surface-treated pineapple core powder (PACP), fabricated via extrusion and fused deposition modelling (FDM). PACP loadings of 1–3 vol% were combined after chemical modification with NaOH and silane to improve interfacial bonding. Particle morphology showed increased porosity and surface roughness following treatment. The melt flow index (MFI) increased from 31.56 to 35.59 g/10 min at 2 vol% PACP, showing improved flowability. Differential scanning calorimetry (DSC) showed the emergence of cold crystallization (Tcc ~121 °C) and an increase in crystallinity from 35.7% (neat PLA) to 47.3% (2 vol% PACP). Thermogravimetric analysis showed only slight decreases in T5 and Tmax, showing the thermal stability. The mechanical testing of extruded filaments showed increased modulus (1463 to 1518 MPa) but a decrease in tensile strength and elongation. For the 3D-printed samples, elongation at break increased slightly at 1–2 vol% PACP, likely because of the improvement in interlayer fusion. Though, at 3 vol% PACP, the mechanical properties declined, consistent with filler agglomeration observed in SEM. Overall, 2 vol% PACP offered the optimal balance between printability, crystallinity, and mechanical performance. These results reveal the possibility of PACP as a value-added biowaste filler for eco-friendly PLA composites suitable for extrusion and 3D printing applications.

28 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
APAnothai Pholsuwan
Anothai Pholsuwan
WCWichain Chailad
Wichain Chailad
ASAthapon Simpraditpan
Athapon Simpraditpan
Ekkachai MartwongEkkachai Martwong
Ekkachai Martwong
KCKawita Chattrakul
Kawita Chattrakul
This study presents the design and performance evaluation of a custom extrusion die for producing grass-cutting lines from high-density polyethylene (HDPE) with twist angles of 0°, 15°, 30°, and 45°. The mechanical properties, cutting efficiency, and energy consumption of the HDPE lines were compared with those of commercially available nylon lines with round and square profiles. The die successfully produced twisted HDPE lines with consistent geometry. Although the HDPE lines exhibited lower tensile strength than their nylon counterparts, due to inherent material differences and residual stress from twisting, they demonstrated comparable elastic modulus values. Importantly, HDPE lines require significantly less energy during processing, offering a cost-effective and environmentally friendly alternative. Cutting tests showed that the 45° twisted HDPE line achieved cutting performance comparable to the square-profile nylon line and surpassed the round-profile variant. These results highlight the potential of HDPE as a viable, energy-efficient material for grass-cutting applications, particularly when optimized through geometric design.