Polymer optics are widely used in various applications, replacing traditional glass lenses. The ability to create free-form and micro-structured optics, as well as fast replication, gives them major advantages over traditional glass lenses. However, the fabrication of complex optical components requires full process control and understanding of influencing factors on the quality of the polymer optical parts. In this work, a curved diffractive optical element (DOE) is fabricated using injection compression molding. Different gate designs were evaluated and the movement of the compression stamper was optimized to obtain good filling behavior. The process stability was analyzed and improved by controlling the melt temperature precisely. Finally, the molding parameters were optimized, focusing on the mold temperature, melt temperature and compression force. Curved diffractive optical elements were replicated with feature sizes of 1.6 μm. The experiments showed that all aspects of the molding process have to be controlled perfectly to produce complex polymer optics. High mold temperatures and compression force are necessary to replicate micro-structured features. The work presents a broad investigation and description of the fabrication process and their influences.
Thermoset materials offer a multitude of advantageous properties in terms of shrinkage and warpage as well as mechanical, thermal and chemical stability compared to thermoplastic materials. Thanks to these properties, thermosets are commonly used to encapsulate electronic components on a 2nd-level packaging prior to assembly by reflow soldering on printed circuits boards or other substrates. Based on the characteristics of thermosets to develop a distinct skin effect due to segregation during the molding process, the surface properties of injection molded thermoset components resemble optical characteristics. Within this study, molding parameters for thermoset components are analyzed in order to optimize the surface quality of injection molded thermoset components. Perspectively, in combination with a reflective coating by e.g., physical vapor deposition, such elements with micro-integrated reflective optical features can be used as optoelectronic components, which can be processed at medium-ranged temperatures up to 230 °C. The obtained results indicate the general feasibility since Ra values of 60 nm and below can be achieved. The main influencing parameters on surface quality were identified as the composition of filler materials and tool temperature.