Accurate assessment of above-ground biomass (AGB) is important for the sustainable management of forests, especially buffer zone (areas within the protected area, where restrictions are placed upon resource use and special measure are undertaken to intensify the conservation value of protected area) areas with a high dependence on forest products. This study presents a new AGB estimation method and demonstrates the potential of medium-resolution Sentinel-2 Multi-Spectral Instrument (MSI) data application as an alternative to hyperspectral data in inaccessible regions. Sentinel-2 performance was evaluated for a buffer zone community forest in Parsa National Park, Nepal, using field-based AGB as a dependent variable, as well as spectral band values and spectral-derived vegetation indices as independent variables in the Random Forest (RF) algorithm. The 10-fold cross-validation was used to evaluate model effectiveness. The effect of the input variable number on AGB prediction was also investigated. The model using all extracted spectral information plus all derived spectral vegetation indices provided better AGB estimates (R² = 0.81 and RMSE = 25.57 t ha⁻¹). Incorporating the optimal subset of key variables did not improve model variance but reduced the error slightly. This result is explained by the technically-advanced nature of Sentinel-2, which includes fine spatial resolution (10, 20 m) and strategically-positioned bands (red-edge), conducted in flat topography with an advanced machine learning algorithm. However, assessing its transferability to other forest types with varying altitude would enable future performance and interpretability assessments of Sentinel-2.

Unmanned aerial vehicles (UAVs) and digital photogrammetric techniques are two recent advances in remote sensing (RS) technology that are emerging as alternatives to high-cost airborne laser scanning (ALS) data sources. Despite the potential of UAVs in forestry applications, very few studies have included detailed analyses of UAV photogrammetric products at larger scales or over a range of forest types, including mixed conifer–broadleaf forests. In this study, we assessed the performance of fixed-wing UAV photogrammetric products of a mixed conifer–broadleaf forest with varying levels of canopy structural complexity. We demonstrate that fixed-wing UAVs are capable of efficiently collecting image data at local scales and that UAV imagery can be effectively utilized with digital photogrammetric techniques to provide detailed automated reconstruction of the three-dimensional (3D) canopy surface of mixed conifer–broadleaf forests. When combined with an accurate digital terrain model (DTM), UAV photogrammetric products are promising for producing reliable structural measurements of the forest canopy. However, the performance of UAV photogrammetric products is likely to be influenced by the structural complexity of the forest canopy. Furthermore, we highlight the potential of fixed-wing UAVs in operational forest management at the forest management compartment level, for acquiring high-resolution imagery at low cost. A future direction of this research would be to address the issue of how well the photogrammetric products can predict the actual structure of mixed conifer–broadleaf forests.

Scientifically robust yet economical and efficient methods are required to gather information about larger areas of uneven-aged forest resources, particularly at the landscape level, to reduce deforestation and forest degradation and to support the sustainable management of forest resources. In this study, we examined the potential of digital aerial photogrammetry (DAP) for assessing uneven-aged forest resources. Specifically, we tested the performance of biomass estimation by varying the conditions of several factors, e.g., image downscaling, vegetation metric extraction (point cloud- and canopy height model (CHM)-derived), modeling method ((simple linear regression (SLR), multiple linear regression (MLR), and random forest (RF)), and season (leaf-on and leaf-off). We built dense point clouds and CHMs using high-resolution aerial imagery collected in leaf-on and leaf-off conditions of an uneven-aged mixed conifer–broadleaf forest. DAP-derived vegetation metrics were then used to predict the dominant height and living biomass (total, conifer, and broadleaf) at the plot level. Our results demonstrated that image downscaling had a negative impact on the accuracy of the dominant height and biomass estimation in leaf-on conditions. In comparison to CHM-derived vegetation metrics, point cloud-derived metrics performed better in dominant height and biomass (total and conifer) estimations. Although the SLR (%RMSE = 21.1) and MLR (%RMSE = 18.1) modeling methods produced acceptable results for total biomass estimations, RF modeling significantly improved the plot-level total biomass estimation accuracy (%RMSE of 12.0 for leaf-on data). Overall, leaf-on DAP performed better in total biomass estimation compared to leaf-off DAP (%RMSE of 15.0 using RF modeling). Nevertheless, conifer biomass estimation accuracy improved when leaf-off data were used (from a %RMSE of 32.1 leaf-on to 23.8 leaf-off using RF modeling). Leaf-off DAP had a negative impact on the broadleaf biomass estimation (%RMSE > 35% for SLR, MLR, and RF modeling). Our results demonstrated that the performance of forest biomass estimation for uneven-aged forests varied with statistical representations as well as data sources. Thus, it would be appropriate to explore different statistical approaches (e.g., parametric and nonparametric) and data sources (e.g., different image resolutions, vegetation metrics, and leaf-on and leaf-off data) to inform the interpretation of remotely sensed data for biomass estimation for uneven-aged forest resources.

The decreasing area of mangroves is an ongoing problem since, between 1980 and 2005, one-third of the world’s mangroves were lost. Rehabilitation and restoration strategies are required to address this situation. However, mangroves do not always respond well to these strategies and have high mortality due to several growth limiting parameters. This study developed a land suitability map for new mangrove plantations in different Southeast Asian countries for both current and future climates at a 250-m resolution. Hydrodynamic, geomorphological, climatic, and socio-economic parameters and three representative concentration pathway (RCP) scenarios (RCP 2.6, 4.5, and 8.5) for 2050 and 2070 with two global climate model datasets (the Centre National de Recherches Météorologiques Climate model version 5 [CNRM-CM5.1] and the Model for Interdisciplinary Research on Climate [MIROC5]) were used to predict suitable areas for mangrove planting. An analytical hierarchy process (AHP) was used to determine the level of importance for each parameter. To test the accuracy of the results, the mangrove land suitability analysis were further compared using different weights in every parameter. The sensitivity test using the Wilcoxon test was also carried out to test which variables had changed with the first weight and the AHP weight. The land suitability products from this study were compared with those from previous studies. The differences in land suitability for each country in Southeast Asia in 2050 and 2070 to analyze the differences in each RCP scenario and their effects on the mangrove land suitability were also assessed. Currently, there is 398,000 ha of potentially suitable land for mangrove planting in Southeast Asia, and this study shows that it will increase between now and 2070. Indonesia account for 67.34% of the total land area in the “very suitable” and “suitable” class categories. The RCP 8.5 scenario in 2070, with both the MIROC5 and CNRM-CM5.1 models, resulted in the largest area of a “very suitable” class category for mangrove planting. This study provides information for the migration of mangrove forests to the land, alleviating many drawbacks, especially for ecosystems.

Knowledge of forest productivity status is an important indicator of the amount of biomass accumulated and the role of terrestrial ecosystems in the carbon cycle. However, accurate and up-to-date information on forest biomass and forest succession remain rudimentary within natural forests. This study sought to understand and establish the potential of a new-generation sensor in estimating aboveground biomass (AGB) stored in the natural forest, also known as ‘community forest’ or buffer zone community forest (BZCF), in the Parsa National Park, Nepal. The utility of the 30-m resolution Landsat 8 Operational Land Imager (OLI) and in situ data was tested using two statistical approaches, namely multiple linear regression (MLR) and random forest (RF). The analysis was done based on four computational procedures. These included spectral bands, vegetation indices and pooled dataset (spectral bands + vegetation indices), and model selected important variables. AGB estimation based on pooled data showed that the RF algorithm produced better results when compared to the use of the MLR model. For instance, the RF model estimated AGB with an R² value of 0.87 and a root mean square error of 20.50 t ha⁻¹, as well as an R² value of 0.95 and a RMSE of 13.3 t ha⁻¹ when using selected important variables. Comparatively, the MLR using pooled data produced an R² value of 0.56 and RMSE value of 37.01 t ha⁻¹. The RF model selected Optimized Soil Adjusted Vegetation index (OSAVI), Simple ratio (SR), Modified simple ratio (MSR), and Normalized difference Vegetation index (NDVI) as the most important variables for estimating AGB, whereas MLR selected band 5 and SR. These findings demonstrate the relevance of the relatively new Landsat 8 sensor in the estimation of AGB in community buffer zones.

The accurate classification of forest types is critical for sustainable forest management. In this study, a novel multiscale global graph convolutional neural network (MSG-GCN) was compared with random forest (RF), U-Net, and U-Net++ models in terms of the classification of natural mixed forest (NMX), natural broadleaved forest (NBL), and conifer plantation (CP) using very high-resolution aerial photographs from the University of Tokyo Chiba Forest in central Japan. Our MSG-GCN architecture is novel in the following respects: The convolutional kernel scale of the encoder is unlike those of other models; local attention replaces the conventional U-Net++ skip connection; a multiscale graph convolutional neural block is embedded into the end layer of the encoder module; and various decoding layers are spliced to preserve high- and low-level feature information and to improve the decision capacity for boundary cells. The MSG-GCN achieved higher classification accuracy than other state-of-the-art (SOTA) methods. The classification accuracy in terms of NMX was lower compared with NBL and CP. The RF method produced severe salt-and-pepper noise. The U-Net and U-Net++ methods frequently produced error patches and the edges between different forest types were rough and blurred. In contrast, the MSG-GCN method had fewer misclassification patches and showed clear edges between different forest types. Most areas misclassified by MSG-GCN were on edges, while misclassification patches were randomly distributed in internal areas for U-Net and U-Net++. We made full use of artificial intelligence and very high-resolution remote sensing data to create accurate maps to aid forest management and facilitate efficient and accurate forest resource inventory taking in Japan.