Hyperspectral imaging is an important technique in remote sensing which is characterized by high spectral resolutions. With the advent of new hyperspectral remote sensing missions and their increased temporal resolutions, the availability and dimensionality of hyperspectral data is continuously increasing. This demands fast processing solutions that can be used to compress and/or interpret hyperspectral data onboard spacecraft imaging platforms in order to reduce downlink connection requirements and perform a more efficient exploitation of hyperspectral data sets in various applications. Over the last few years, reconfigurable hardware solutions such as field-programmable gate arrays (FPGAs) have been consolidated as the standard choice for onboard remote sensing processing due to their smaller size, weight, and power consumption when compared with other high-performance computing systems, as well as to the availability of more FPGAs with increased tolerance to ionizing radiation in space. Although there have been many literature sources on the use of FPGAs in remote sensing in general and in hyperspectral remote sensing in particular, there is no specific reference discussing the state-of-the-art and future trends of applying this flexible and dynamic technology to such missions. In this work, a necessary first step in this direction is taken by providing an extensive review and discussion of the (current and future) capabilities of reconfigurable hardware and FPGAs in the context of hyperspectral remote sensing missions. The review covers both technological aspects of FPGA hardware and implementation issues, providing two specific case studies in which FPGAs are successfully used to improve the compression and interpretation (through spectral unmixing concepts) of remotely sensed hyperspectral data. Based on the two considered case studies, we also highlight the major challenges to be addressed in the near future in this emerging and fast growing research area.

Hyperspectral remote sensing attempts to identify features in the surface of the Earth using sensors that generally provide large amounts of data. The data are usually collected by a satellite or an airborne instrument and sent to a ground station that processes it. The main bottleneck of this approach is the (often reduced) bandwidth connection between the satellite and the station, which drastically limits the information that can be sent and processed in real time. A possible way to overcome this problem is to include onboard computing resources able to preprocess the data, reducing its size by orders of magnitude. Reconfigurable field-programmable gate arrays (FPGAs) are a promising platform that allows hardware/software codesign and the potential to provide powerful onboard computing capability and flexibility at the same time. Since FPGAs can implement custom hardware solutions, they can reach very high performance levels. Moreover, using run-time reconfiguration, the functionality of the FPGA can be updated at run time as many times as needed to perform different computations. Hence, the FPGA can be reused for several applications reducing the number of computing resources needed. One of the most popular and widely used techniques for analyzing hyperspectral data is linear spectral unmixing, which relies on the identification of pure spectral signatures via a so-called endmember extraction algorithm. In this paper, we present the first FPGA design for N-FINDR, a widely used endmember extraction algorithm in the literature. Our system includes a direct memory access module and implements a prefetching technique to hide the latency of the input/output communications. The proposed method has been implemented on a Virtex-4 XC4VFX60 FPGA (a model that is similar to radiation-hardened FPGAs certified for space operation) and tested using real hyperspectral data collected by NASA's Earth Observing-1 Hyperion (a satellite instrument) and the Airborne Visible Infra-Red Imaging Spectrometer over the Cuprite mining district in Nevada and the Jasper Ridge Biological Preserve in California. Experimental results demonstrate that our hardware version of the N-FINDR algorithm can significantly outperform an equivalent software version and is able to provide accurate results in near real time, which makes our reconfigurable system appealing for onboard hyperspectral data processing.

A decision tree is a well-known machine learning technique. Recently their popularity has increased due to the powerful Gradient Boosting ensemble method that allows to gradually increasing accuracy at the cost of executing a large number of decision trees. In this paper we present an accelerator designed to optimize the execution of these trees while reducing the energy consumption. We have implemented it in an FPGA for embedded systems, and we have tested it with a relevant case-study: pixel classification of hyperspectral images. In our experiments with different images our accelerator can process the hyperspectral images at the same speed at which they are generated by the hyperspectral sensors. Compared to a high-performance processor running optimized software, on average our design is twice as fast and consumes 72 times less energy. Compared to an embedded processor, it is 30 times faster and consumes 23 times less energy.

Hyperspectral imaging is a new emerging technology in remote sensing which generates hundreds of images, at different wavelength channels, for the same area on the surface of the Earth. Over the last years, many algorithms have been developed with the purpose of finding endmembers, assumed to be pure spectral signatures in remotely sensed hyperspectral data sets. One of the most popular techniques has been the pixel purity index (PPI). This algorithm is very time-consuming. The reconfigurability, compact size, and high computational power of Field programmable gate arrays (FPGAs) make them particularly attractive for exploitation in remote sensing applications with (near) real-time requirements. In this paper, we present an FPGA design for implementation of the PPI algorithm. Our systolic array design includes a DMA and implements a prefetching technique to reduce the penalties due to the I/O communications. We have also included a hardware module for random number generation. The proposed method has been tested using real hyperspectral data collected by NASA's Airborne Visible Infrared Imaging Spectrometer over the Cuprite mining district in Nevada. Experimental results reveal that the proposed hardware system is easily scalable and able to provide accurate results with compact size in (near) real-time, which make our reconfigurable system appealing for on-board hyperspectral data processing.

Machine learning techniques are widely used for pixel-wise classification of hyperspectral images. These methods can achieve high accuracy, but most of them are computationally intensive models. This poses a problem for their implementation in low-power and embedded systems intended for on-board processing, in which energy consumption and model size are as important as accuracy. With a focus on embedded and on-board systems (in which only the inference step is performed after an off-line training process), in this paper we provide a comprehensive overview of the inference properties of the most relevant techniques for hyperspectral image classification. For this purpose, we compare the size of the trained models and the operations required during the inference step (which are directly related to the hardware and energy requirements). Our goal is to search for appropriate trade-offs between on-board implementation (such as model size and energy consumption) and classification accuracy.