Xiongbiao Chen

Prof. Xiongbiao Chen

Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Dr., Saskatoon, SK S7N 5A9, Canada
orcid

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2011 in Tissue Engineering Part B: Reviews
Verified
Journal Article
Closed access
CLChristopher James Little
Christopher James Little
NBNahshon Kenneth Bawolin
Nahshon Kenneth Bawolin
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen
There has been much research over the past two decades with the aim of engineering cartilage constructs for repairing or restoring damaged cartilage. To engineer healthy neocartilage, the constructs must have mechanical properties matching those of native cartilage as well as appropriate for the loading conditions of the joint. This article discusses the mechanical behavior of native cartilage and surveys different types of tensile, compressive, and shear tests with their limitations. It also comprehensively reviews recent work and achievements in developing the mathematical models representing the mechanical properties of both native and engineered cartilage. Different methods for enhancing the mechanical properties of engineered cartilage are also discussed, including scaffold design, mechanical stimulation, and chemical stimulation. This article concludes with recommendations for future research aimed at achieving engineered cartilage with mechanical properties matching those found in native cartilage.

10 February 2021 in Journal of Pharmaceutical Analysis
Verified
Journal Article
Open access
SNSaman Naghieh
Saman Naghieh
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen
Three-dimensional (3D) extrusion-based bioprinting is widely used in tissue engineering and regenerative medicine to create cell-incorporated constructs or scaffolds based on the extrusion technique. One critical issue in 3D extrusion-based bioprinting is printability or the capability to form and maintain reproducible 3D scaffolds from bioink (a mixture of biomaterials and cells). Research shows that printability can be affected by many factors or parameters, including those associated with the bioink, printing process, and scaffold design, but these are far from certain. This review highlights recent developments in the printability assessment of extrusion-based bioprinting with a focus on the definition of printability, printability measurements and characterization, and printability-affecting factors. Key issues and challenges related to printability are also identified and discussed, along with approaches or strategies for improving printability in extrusion-based bioprinting.

24 May 2017 in Biotechnology Journal
Verified
Journal Article
Closed access
PDF file
LNLiqun Ning
Liqun Ning
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen

1 February 2018 in Tissue Engineering Part C: Methods
Verified
Journal Article
Closed access
MIMohammad Izadifar
Mohammad Izadifar
DCDean Chapman
Dean Chapman
PBPaul Babyn
Paul Babyn
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen
MKMichael E. Kelly
Michael E. Kelly
Biofabrication of cell supportive cardiac patches that can be directly implanted on myocardial infarct is a potential solution for myocardial infarction repair. Ideally, cardiac patches should be able to mimic myocardium extracellular matrix for rapid integration with the host tissue, raising the need to develop cardiac constructs with complex features. In particular, cardiac patches should be electrically conductive, mechanically robust and elastic, biologically active and prevascularized. In this study, we aim to biofabricate a nanoreinforced hybrid cardiac patch laden with human coronary artery endothelial cells (HCAECs) with improved electrical, mechanical, and biological behavior. A safe ultraviolet (UV) exposure time with insignificant effect on cell viability was identified for methacrylated collagen (MeCol) micropatterning. The effects of carboxyl functionalized carbon nanotubes (CNTs) on MeCol and alginate matrix morphology, mechanical properties, electrical behavior, and cellular response were investigated at different CNT mass ratios. A UV-integrated 3D-bioprinting technique was implemented to create hybrid hydrogel constructs consisting of CNT-incorporated alginate framework and cell-laden MeCol. The compressive modulus, impedance, and swelling degree of hybrid constructs were assessed over 20 days of incubation in culture medium at 37°C for different CNT mass ratios. The HCAEC viability, proliferation, and differentiation in the context of the bioprinted hybrid constructs were assessed over 10 days in vitro. The functionalized CNTs provided a highly interconnected nanofibrous meshwork that significantly improved viscoelastic behavior and electrical conductivity of photo-cross-linked MeCol. Alginate-coated CNTs provided a nanofilamentous network with fiber size of ∼25–500 nm, improving not only electrical and mechanical properties but also HCAEC attachment and elongation compared to pristine alginate. The CNT-reinforced 3D-printed hybrid constructs presented significantly higher stiffness and electrical conductivity particularly in the physiologically relevant frequency range (∼5 Hz). The CNT-reinforced hybrid implants maintained a significantly higher swelling degree over 20 days of culturing compared to CNT-free hybrid constructs. For a selected CNT mass ratio, HCAECs presented significant cellular proliferation, migration, and differentiation (lumen-like formation) over 10 days of incubation in vitro. Findings from this study deliver essential steps toward developing conductive, robust, and potentially prevascularized hybrid cardiac patches.

1 October 2023 in Bioactive Materials
Verified
Journal Article
Open access
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen
Abbas Fazel Anvari-YazdiAbbas Fazel Anvari-Yazdi
Abbas Fazel Anvari-Yazdi
XDX. Duan
X. Duan
AZAmanda Zimmerling
Amanda Zimmerling
RGR. Gharraei
R. Gharraei
LNL. Ning
L. Ning
Bioinks are formulations of biomaterials and living cells, sometimes with growth factors or other biomolecules, while extrusion bioprinting is an emerging technique to apply or deposit these bioinks or biomaterial solutions to create three-dimensional (3D) constructs with architectures and mechanical/biological properties that mimic those of native human tissue or organs. Printed constructs have found wide applications in tissue engineering for repairing or treating tissue/organ injuries, as well as in vitro tissue modelling for testing or validating newly developed therapeutics and vaccines prior to their use in humans. Successful printing of constructs and their subsequent applications rely on the properties of the formulated bioinks, including the rheological, mechanical, and biological properties, as well as the printing process. This article critically reviews the latest developments in bioinks and biomaterial solutions for extrusion bioprinting, focusing on bioink synthesis and characterization, as well as the influence of bioink properties on the printing process. Key issues and challenges are also discussed along with recommendations for future research.

Verified
Journal Article
Open access
PDF file
Ali MalekpourAli Malekpour
Ali Malekpour
Xiongbiao ChenXiongbiao Chen
Xiongbiao Chen
Extrusion bioprinting is an emerging technology to apply biomaterials precisely with living cells (referred to as bioink) layer by layer to create three-dimensional (3D) functional constructs for tissue engineering. Printability and cell viability are two critical issues in the extrusion bioprinting process; printability refers to the capacity to form and maintain reproducible 3D structure and cell viability characterizes the amount or percentage of survival cells during printing. Research reveals that both printability and cell viability can be affected by various parameters associated with the construct design, bioinks, and bioprinting process. This paper briefly reviews the literature with the aim to identify the affecting parameters and highlight the methods or strategies for rigorously determining or optimizing them for improved printability and cell viability. This paper presents the review and discussion mainly from experimental, computational, and machine learning (ML) views, given their promising in this field. It is envisioned that ML will be a powerful tool to advance bioprinting for tissue engineering.