Although convective thermal cloaking has been advanced significantly, the majority of related researches have concentrated on creeping viscous potential flows. Here, we consider convective thermal cloaking works in non-creeping viscous potential flows, and propose a combination of the separation of variables method and the equivalent-medium integral method to analytically deduce the parameters of convective thermal cloaks with isotropic-homogeneous dynamic viscosity and thermal conductivity. Through numerical simulation, we demonstrate the cloaks can hide the object from thermo-hydrodynamic fields. Besides, by comparing the drag force cloaks bear in cloak case and the objects bear in object-existent case, we find convective thermal cloaks can considerably reduce the drag force, which appears drag-free characteristics. Finally, it is our hope that these developed methods can reduce the difficulties of metadevices fabrications, promote the development of drag reduction technology under higher Reynolds number, and shed light on the control of other multi-physics systems.

Flow control technologies play a crucial role in modern engineering and scientific research. Hydrodynamic metamaterials, as an emerging branch in the field of flow control, have attracted extensive research due to their remarkable potential in flow control, thus leading to the development of hydrodynamic metadevices. Here, we propose a meta-hydrodynamics theory for the active manipulation of fluid flows, which establishes an equivalence relation between volumetric forces and spaces and, consequently, allows for the design of active hydrodynamic metadevices. This equivalence relation can be utilized to accurately tailor the flow fields as long as the manipulation effects of the hydrodynamic metadevices on the flow fields are predetermined. By constructing a mapping relation of coordinate transformation from virtual space to physical space, we can determine the required volumetric force distributions to realize these hydrodynamic metadevices. We exemplify this theory with three different applications: hydrodynamic cloaks, concentrators, and rotators, for which we calculate the corresponding volumetric force distributions. Subsequent numerical simulations reveal the excellent manipulation performances of these hydrodynamic metadevices in both uniform and non-uniform flow fields. Finally, our research is expected to pioneer new perspectives in the development of hydrodynamic metadevices and methodologies for flow control under nonlinear flows with high Reynolds numbers.

Aiming at the heat transfer calculation of the Passive Residual Heat Removal Heat Exchanger (PRHR HX), experiments on the heat transfer of C-shaped tube immerged in a water tank were performed. Comparisons of different correlation in literatures with the experimental data were carried out. It can be concluded that the Dittus-Boelter correlation provides a best-estimate fit with the experimental results. The average error is about 0.35%. For the tube outside, the McAdams correlations for both horizontal and vertical regions are best-estimated. The average errors are about 0.55% for horizontal region and about 3.28% for vertical region. The tank mixing characteristics were also investigated in present work. It can be concluded that the tank fluid rose gradually which leads to a thermal stratification phenomenon.

Hydrodynamic cloaks have attracted extensive attention because of their ability to significantly reduce the surface resistance of designated target. However, most of parameters of traditional hydrodynamic cloaks present inhomogeneous and anisotropy, which increases the challenge of manufacturing hydrodynamic cloaks for us. To overcome this limitation, equivalent medium theory and integral median theorem are used to homogenize the parameters of hydrodynamic cloaks. Numerical simulations verify that the simplified homogeneous hydrodynamic cloaks exhibit the equivalent cloaking effect as inhomogeneous hydrodynamic cloaks, which can be applied to different flow fields as well. This simplified method not only can simplify inhomogeneous hydrodynamic cloaks to homogeneous hydrodynamic cloaks, but also can be applied to other physical fields, such as optics, acoustics, electromagnetics, and thermodynamics among other areas for the homogenization of metamaterial design, providing a new method to relax the difficulty of metamaterial design. In addition, based on the applicability of homogeneous hydrodynamic cloaks to different flow fields, hydrodynamic camouflage devices are designed that can camouflage the flow fields generated by the original objects into fields caused by arbitrary objects, offering a scheme for achieving hydrodynamic camouflage. Finally, as Reynolds numbers increase, the cloaking and drag reduction performance of hydrodynamic cloaks are quantitatively compared and analyzed. The results show that hydrodynamic cloaks still exhibit high performance in cloaking and drag reduction in non-creeping flows.

The Passive Residual Heat Removal Heat Exchanger (PRHR HX) is an important part of the Passive Residual Heat Removal System (PRHRS). The C-shaped bundle is being used in the PRHR HX. A test facility of C-shaped tube immerged in a water tank was built to research the heat transfer of the PRHR HX. Through the experiments, three regions were found within a particular period of time during the heating process in the tank: natural convection region, transition region, and saturation boiling region. For the tube outside saturation boiling, comparisons of three different correlations in literatures with the experimental data were carried out. Results show that the Rohsenow correlation provides a best-estimate fit with the experimental results. For the tube outside transition region, a formulation is put forward to reduce error based on the Rohsenow subcooled boiling correlation.