Olamide Badara

Ms. Olamide Badara


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 December 2024 in Textile Research Journal
Verified
Journal Article
Open access
OBOlamide Badara
Olamide Badara
VRVirpi Rämö
Virpi Rämö
MRMarja Rissanen
Marja Rissanen
ATAli Tehrani-Bagha
Ali Tehrani-Bagha
To foster a circular economy, it is crucial to increase the recycling of solid waste significantly, particularly post-consumer textile waste, and identify viable applications for the reclaimed materials. This study specifically examined the integration of mechanically recycled post-consumer polyester and cotton fibers containing fractions into carded and needle-punched non-woven structures. The research investigated the carding processability of four mechanically recycled fibers, examining their performance when combined with virgin polyester fibers in varying ratios. The fiber fractions were characterized in terms of mean fiber length, short fiber content, fiber uniformity, diameter, fiber bundle strength, and elongation. The processability challenges encountered during the carding of the mechanically recycled textile fractions were mainly associated with high proportions of synthetic recycled fibers, which resulted in increased fiber piling on the metallic parts of the carding device. Furthermore, the effect of different blend ratios of mechanically recycled polyester and cotton fibers with virgin polyester fiber on the properties of carded and needle-punched structures, including mass per unit area, thickness, tensile strength, elongation, air permeability, morphology, and porosity was studied. The tensile properties and air permeability of non-wovens obtained from 50/50 blends of recycled polyester cotton and virgin polyester were comparable to those produced from 100% virgin polyester fibers. The results of this study demonstrate that carding and needle punching provide a robust route for processing polyester and cotton containing mechanically recycled end-of-life textile-based fractions without the use of chemical additives.

16 October 2025 in Cellulose
Verified
Journal Article
Open access
PDF file
NNNicole Nygren-Sundell
Nicole Nygren-Sundell
EHEmily Hart
Emily Hart
ISInge Schlapp-Hackl
Inge Schlapp-Hackl
EREva Reiska
Eva Reiska
OBOlamide Badara
Olamide Badara
MHMichael Hummel
Michael Hummel
The textile and nonwoven industries are some of the largest and fastest growing industries in the world. However, they are also some of the major contributors to environmental pollution. Therefore, there is a need to develop more sustainable alternatives in the textile sector. The nonwoven industry faces challenges with the single-use nature of many of its products and the use of non-renewable raw materials. In light of these challenges, this study explores the possibility of alternative cellulosic raw materials for producing man-made cellulose fibres (MMCF) for nonwovens using the Ioncell technology. Specifically, straw pulp and recycled Lyocell-based nonwovens are examined. Various pretreatments are applied to remove additives and improve spinnability, such as NaOH and H 2 SO 4 treatments. The treatments and spinning conditions are optimized using a monofilament spinning unit and fibres are then produced for samples with a larger multifilament spinning unit. The properties of the fibres, including tensile strength, elongation, and orientation, are evaluated. The results show that the fibres produced from the recycled nonwovens and straw pulp exhibit comparable properties to standard Ioncell fibres. The recycling process is successful in maintaining fibre quality, making it a promising alternative for MMCF production. Graphical Abstract

24 January 2026 in The Journal of the Textile Institute
Verified
Journal Article
Open access
OBOlamide Badara
Olamide Badara
FSFilip Sanetrnik
Filip Sanetrnik
ONOndrej Novak
Ondrej Novak
JCJiri Chaloupek
Jiri Chaloupek
JCJiri Chvojka
Jiri Chvojka
ATAli Tehrani
Ali Tehrani

9 November 2026 in Materials Today Communications
Verified
Journal Article
Open access
OBOlamide Badara
Olamide Badara
MMMarjo Määttänen
Marjo Määttänen
Ali TarhiniAli Tarhini
Ali Tarhini
TTTuomas Turpeinen
Tuomas Turpeinen
MRMarja Rissanen
Marja Rissanen
ATAli Tehrani
Ali Tehrani

12 November 2026 in Journal of Engineered Fibers and Fabrics
Verified
Journal Article
Open access
OBOlamide Badara
Olamide Badara
KNKaarlo Nieminen
Kaarlo Nieminen
TTTuomas Turpeinen
Tuomas Turpeinen
MCMakrem Cherni
Makrem Cherni
MRMarja Rissanen
Marja Rissanen
ATAli Tehrani-Bagha
Ali Tehrani-Bagha
Fibre waste generated during the shredding and tearing of post-consumer textiles is a potential fibre resource for nonwoven production. However, in order to convert these waste fibres into nonwovens, key challenges associated with fibre heterogeneity, poor dispersion stability, and processability need to be addressed. In this study, sodium carboxymethyl cellulose (SCMC) was investigated as a biobased dispersing and processing additive in wet-laid nonwoven sheets produced from these cellulosic textile-based waste fibres. The length distribution of the fibres was assessed using image analysis. Fibre suspensions containing varying SCMC contents were characterised in terms of pH, conductivity, and dispersion stability. Wet-laid sheets were produced using SCMC at 0, 0.5, and 1 wt.%, and the influence of SCMC on nonwoven structure and mechanical performance was evaluated. Nonwoven characterisation included mass per unit area, thickness, and bulk density; uniformity; attenuated total reflectance Fourier transform infrared spectroscopy; thermogravimetric analysis; morphological analysis; flexural rigidity; tear resistance and tensile properties. The findings demonstrate that SCMC is effective as a low-dose, biobased processing aid for improving fibre dispersion, sheet uniformity, flexural rigidity, tear resistance and tensile performance of wet-laid nonwovens made from textile recycling waste fibres. This study further highlights the potential of additive-based strategies to enable the utilisation of post-consumer textile waste in wet-laid nonwoven manufacturing.