The focus of this review article is to present a retrospective analysis of copper applications focusing on ions and nanoparticles as broad-spectrum antimicrobials. Copper nanoparticles are presented as an alternative to rising antibiotic resistance. The basic mechanisms of bacterial, fungal, and viral inactivation, which explain their potential, are presented. The green biosynthesis of copper nanoparticles using biomaterials is also presented and considered a very promising trend for future biotechnology and medical applications.
The present work deals with the sol–gel synthesis of silica–poly (vinylpyrrolidone) hybrid materials. The nanohybrids (Si-PVP) have been prepared using an acidic catalyst at ambient temperature. Tetramethyl ortosilane (TMOS) was used as a silica precursor. Poly (vinylpyrrolidone) (PVP) was introduced into the reaction mixture as a solution in ethanol with a concentration of 20%. The XRD established that the as-prepared material is amorphous. The IR and 29Si MAS NMR spectra proved the formation of a polymerized silica network as well as the hydrogen bonding interactions between the silica matrix and OH hydrogens of the silanol groups. The TEM showed spherical particle formation along with increased agglomeration tendency. The efficacy of SiO2/PVP nanoparticles as a potential antimicrobial agent against a wide range of bacteria was evaluated as bacteriostatic, using agar diffusion and spot tests. Combined effects of hybrid nanomaterial and antibiotics could significantly reduce the bactericidal concentrations of both the antibiotic and the particles, and they could also eliminate the antibiotic resistance of the pathogen. The registered prooxidant activity of the newly synthesized material was confirmative and explicatory for the antibacterial properties of the tested substance and its synergetic combination with antibiotics. The effect of new hybrid material on Crustacea Daphnia magna was also estimated as harmless under concentration of 0.1 mg/mL.
The present paper deals with the synthesis, characterization, and properties of sol-gel-derived TiO2/TeO2/Nb2O5 nanopowders. The gels were prepared using a combination of organic [Ti (IV) n-butoxide, Nb (V) ethoxide (C10H25NbO5)] and inorganic [telluric acid (H6TeO6)] precursors. The aging of gels was performed in air for several days in order to enable further hydrolysis. The phase formation of the gels was investigated by XRD upon heating in the temperature range of 200–700 °C. It was established that the gels heat-treated up to 300 °C exhibited a predominantly amorphous phase in all binary and ternary compositions. The amount of amorphous phase gradually decreased with increasing temperature, and the first TiO2 (anatase) crystals were detected at about 400–500 °C. The average crystallite size of TiO2 (anatase) in the powdered samples heat-treated at 400 °C was about 10 nm. By DTA, it was established that the decomposition of organics is accompanied by strong weight loss occurring in the temperature range of 200–300 °C. The completeness of the hydrolysis-condensation reactions was verified by IR and UV–Vis analyses. The UV–Vis spectra of the as-prepared gels exhibited red shifting of the cut-off. Photoluminescence spectra exhibited a change in intensity with varying temperature and composition. The performed photocatalytic tests showed that all powders possess photocatalytic activity toward Malachite green organic dye. The obtained nanopowders exhibited good antibacterial properties against E. coli ATCC 25922. The obtained samples can be considered as prospective materials for use as environmental catalysts.
Background: The present work is devoted to the biological effects of sol–gel-derived silica (Si)–copper (Cu) nanomaterials. Methods and Results: Tetraethyl orthosilane (TEOS) was used as a silica precursor; copper was introduced as a solution in ethanol with Cu(OH)2. The obtained samples were denoted as Si/Cu (gel) and Si/Cu/500 (500 °C heat-treated). Their phase formation and morphology were studied by XRD and SEM. The antibacterial activity was tested by two Gram-positive bacteria, three Gram-negative bacteria, and two types of eukaryotic species. Most bacteria were more sensitive to Si/Cu/500 materials than to Si/Cu (gel). The yeasts were more sensitive to Si/Cu (gel). The new nanomaterials were tested for oxidant activity at pH 7.4 (physiological) and pH 8.5 (optimal) in three model systems by the chemiluminescent method. They significantly inhibited the generation of free radicals and ROS. This result underlines their potential as regulators of the free radical processes in living systems. The epithelial tumor cell lines appeared more sensitive than the non-transformed fibroblasts, likely due to their metabolic activity and proliferation rates, leading to greater accumulation of the substances. Using Daphnia magna, the ecotoxicity study showed that the LC50 was reached at 1 mg/L of Si/Cu/500. Si/Cu (gel) was more toxic. Conclusions: Our results reveal the potential of these nanohybrids to be applied in living, eukaryotic systems. The cytotoxicity evaluation showed higher tolerance of normal, non-transformed cells, in concurrence with the oxidation tests.
Objective: The objective of our study was to synthesize and characterize silica–copper nanomaterials and to evaluate their biological properties (antibacterial, redox, cytotoxic, and ecotoxic) for potential applications. Methods and Results: Si/Cu-based materials were prepared by a sol–gel method. They were characterized by XRD, UV-Vis, and SEM-EDS. The antibacterial activity of the materials was evaluated against Gram-positive bacteria (Staphylococcus aureus, Bacillus cereus), Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium), and yeasts (Candida albicans, Saccharomyces cerevisiae). The nanomaterial that was calcined at 500 °C exhibited greater antibacterial efficacy compared to the gel form. S. typhimurium demonstrated the highest susceptibility, whereas S. aureus and P. aeruginosa were the most resistant of the tested bacteria. Both yeasts exhibited comparable sensitivity (MBC = 1.0 mg/mL). The redox activity of both nanomaterials was tested at pH 7.4 (physiological) and 8.5 (optimal) by the activated chemiluminescent method. The nanocomposites significantly inhibited the free-radical and ROS generation. This presents them as redox regulators in living systems. The cytotoxic effects in normal BEAS-2B and tumor A549 human cell lines were assessed microscopically and by the cell viability neutral red uptake assay, CC50 being evaluated. The observed effects suggest moderate, similar cytotoxicity in both cell lines. The ecotoxicity study using Daphnia magna showed an LC50 of ~7–8 mg/L about Si/Cu/500. The LC50 for Si/Cu (gel) was lower than 0.25 mg/L, indicating an increase in toxicity with increased exposure time. Conclusions: Possible applications of the newly synthesized nanomaterials include antimicrobial coatings, drug delivery systems, antioxidant additives in various formulations, and water purification.
Silica–poly (vinylpyrrolidone) hybrid material was prepared using the sol–gel method. Tetramethyl ortosilane (TMOS) was used as a silica precursor. XRD analysis established that the as-prepared material is amorphous. The morphological structure of the final product was determined by the incorporated PVP. The UV–Vis analysis showed that the obtained hybrid exhibited absorption in the ultraviolet range. The antimicrobial activity of the SiO2/15PVP hybrid material was tested on Staphylococcus epidermidis ATCC 14990, Salmonella typhimurium ATCC BAA-2162, Candida albicans, and Saccharomyces cerevisiae in combination with the following antibiotics: Vancomycin for Gram-positive bacteria, Ciprofloxacin for Gram-negative bacteria, and Nystatin for yeast. The results confirmed a concentration-dependent synergistic effect of the antibiotic in combination with the TM15/PVP hybrid particles, especially at their highest concentration of 100 mg/mL on Gram-positive bacteria and for the Gram-negative Salmonella. On Candida albicans ATCC 18804 and Saccharomyces cerevisiae CCY 21-6-3, the effect was synergistic again, and a fungicidal effect was observed at 6.25 and 1.50 mg/mL for the antibiotic concentration and concentrations of hybrid material at 100 mg/mL. The toxicity on Daphnia magna was also tested. The registered prooxidant activity of SiO2/15PVP shows possible applications at very low concentrations. The obtained results demonstrate the possibility of clinical implementations of the newly synthesized hybrid material.