Purpose: The purpose of this study is to give an insight into the practices of Moroccan industrial companies in the area of managing quality costs. Furthermore, it analyses how the quality costing system (QCS) implementation and sophistication differentiate according to a number of variables (size, business market orientation, QMS Maturity...).Design/methodology/approach: In order to achieve this objective, a questionnaire survey has been conducted among a heterogeneous sample of 1000 industrial companies that are operating in the national territory yielding a response rate of 23.4%. This study uses exploratory and chi-square test in the process of answering the above-mentioned questions.Findings: The survey highlighted the limited use of quality costing practices among Moroccan industrial companies. Results indicated that 42.6% of surveyed companies are engaged in QCS while 63.4% of them do not. The primary barrier is the complexity of QCS implementation. Besides, findings pointed out that origin, business activity, business market orientation and QMS maturity level are prominent to QCS implementation (p<0.05).Originality/value: This is one of the first studies to provide an insight into practices of Moroccan industrial companies in the area of managing quality costs. Indeed, several studies were led in different countries but no empirical study has been conducted in Morocco. This will give a clear picture of the situation at the national level.Research limitations/implications: The major limitation of the study is the limited number of respondents. Future researches should be conducted to cover a bigger sample size from manufacturing and services sector as well.Practical implications: The findings provide an insight into the barriers to QCS implementation which can be used as basis to identify ways to overcome these difficulties, to develop guideline and reveal best practices in the implementation of COQ reporting system.
Industrial discharge of hazardous organic and synthetic chemicals, such as antibacterials and dyes, poses severe risks to human health and the environment. This study was conducted to address the urgent need for efficient and stable zinc-oxide-based photocatalysts to degrade such pollutants. A novel approach to synthesizing silver-loaded zinc oxide (Ag@Z) catalysts was introduced by using a simple and efficient combination of hydrothermal and precipitation methods. Comprehensive characterization of Ag@Z photocatalysts was performed using XRD, XPS, Raman, UV–vis adsorption, FTIR, and SEM, revealing an enhancement of structural, optical, and morphological properties in comparison to pure zinc oxide. Notably, the 5%Ag@Z catalyst exhibited the highest degradation efficiency among the other synthesized catalysts under UV-C light irradiation, and enhanced the degradation rate of pure zinc oxide (Z) by 1.14 and 1.64 times, for Triclosan (TCS) and Methylene Blue (MB), respectively. the effect of catalyst dose and initial concentration was studied. A mechanism of degradation was proposed after investigating the effect of major reactive species. The 5%Ag@Z catalyst increased the photostability, which is a major problem of zinc oxide due to photocorrosion after reusability. We found that 50% and 74% of energy consumption for the photocatalytic degradation of TCS and MB by 5%Ag@Z, respectively, was saved in compassion with zinc oxide. The remarkable photocatalytic performance and the good recovery rate of Ag@Z photocatalysts demonstrate their high potential for photocatalytic degradation of organic contaminants in water.
In this study, the properties of unsaturated polyester resin were studied in the presence of recycled ceramic waste particles. Herein, composites were created that contained 28.5-50 wt% porcelain particles (particle size <180 µm). High filler contents increased the gel time and decreased the exotherm temperature of unsaturated polyester resin during curing. The obtained results showed that physical parameters, such as the resin density and porosity, increased as the filler content increased. In addition, the X-ray diffraction results indicated that the produced samples were a combination of ceramic waste particles and unsaturated polyester resin, resulting in semi crystalline structure. The results showed that the maximum water absorption at 40°C increased from 0.97 to 1.5% as the filler content increased from 28.5 to 50 wt%; in this process, the materials experienced a color change but did not lose mechanical performance. Finally, the samples were characterized by thermogravimetric analysis (TGA) to study the effect of porcelain powder on the thermal degradation of the resin. The TGA scans were analyzed with the Friedman method. The results indicated that the samples with porcelain powder exhibited substantially better thermal stability than unsaturated polyester resin.
In this study, two nanomaterials with excellent adsorption capacities were developed to remove chromium (VI) and cobalt (II) heavy metals efficiently from wastewater. MnO2-NP-CPC and γ-Fe2O3-NP-CPC nanomaterials were successfully synthesized using an agricultural waste which is cassava peels, and characterized by different techniques namely FTIR, XRD, BET, SEM, and EDX analysis. The experimental tests for the adsorption process were done in a batch system, and the influence of various parameters such as temperature, initial concentration, pH, and contact time on the biosorption of cobalt (II) and chromium (VI) were fully investigated. Furthermore, the Qmax were 546,32 mg/g and 349,59 mg/g for chromium (VI) and cobalt (II) respectively. The results fitted well the monolayer Langmuir with the pseudo-second-order model, revealing that chemisorption controls heavy metals removal, while the thermodynamic sorption was an endothermic and spontaneous reaction. Artificial Neural Network (ANN) model was developed to predict as well as to simulate the experimental results, for this purpose, the proposed model was based on five independent inputs or variables and one output or response which is the predicted adsorbed amount of Cr (VI) and Co (II), the predicted results were in good agreement with the experimental values, indeed the proposed ANN model showed an appreciable prediction accuracy with high optimization ability for chromium (VI) and cobalt (II) removal. Hence the present work has great potential for the industrial and environmental applications of biochar and nanomaterials especially in wastewater treatment and green chemistry.